Cub Cadet XT1 / XT2 Full service / Full maintenance including oil and filter change.
ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2022
- Oil change, oil filter, fuel filter, air filter, spark plugs, blade sharpening and grease job. Front turn buckle and wheel hub grease job.
The XT1 and XT2 are the same except for the air filters, both shown and the spark plugs - the XT2 has two spark plugs.
Here is the first video of the seasonal service of the XT2 with blade sharpening.
• Spring Setup for Cub C...
Music by TH-cam.
This channel is owned and operated by Armed and Dangerous DIY. - แนวปฏิบัติและการใช้ชีวิต
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Finally after 4 years I found the best ever maintenance video. God Bless! All my questions answered in this video,
Thank you so much, I do appreciate it!
Wow A&D! I pray and ask the Lord for enlightenment to get a little better each and every day. Today He delivered through you. Thanks!
Thank You. I really appreciate the encouragement.
Awesome video ! Learned so much from this and also I was digging the music. Thank you.
Appreciate it. Yes it’s hard to find good copyright free music. I spent a lot of time curating soundtracks for different moods. Check out bensound.com
I appreciate the video. Thanks for taking the time to post it.
I know it’s not a giant exotic tractor but lots of people own these and I thought they might benefit from my woes. 😎
@@armedanddangerousdiy6096 mine was certainly spitting and sputtering... runs like a champ now.
You know that was really well done and enjoyable to watch. Thanks for doing this👍
Your welcome!
Amazing amount of knowledge in this video🙏 thank you kind sir🙏
Thx! I also did one on fall leaf vacuuming and a second on setting up to plow snow. Assuming it snows where you are. 😜
@@armedanddangerousdiy6096 will def check it out!
Most excellent sir!
I love the “I just don’t care” comment! 😂
Liked and subscribed
Thank You!
I realized that both mowers had the Cub Cadet engines installed because the Kohler orientation is entirely different. I certainly appreciated your content. I have to do a tune up shortly. Someone has some cool ideas or money saving tips.
Great point!
Great video! Thank you for taking the time to share.
If I missed this, sorry.
But how often do you do this maintenance?
I do it once a year. Thanks for watching!
Some dispute about using grease on the steering gear…..many say the grease attracts dirt and debris and causes wear…suggest using a spray dry lubricant instead…that spin on oil filter is a real pain…oil leaks all over when taking it off…I fashioned a small tray to divert the oil beyond the frame to the catch pan…just my two cents…good job..
I had the same thought when I put the grease on, but I also know metal on metal is not the greatest idea either. I was figured I could clean it off with degreaser and acetone and try something else. I am going to go hunting for this mythical dry lubricant you mentioned is it just never occurred to me that such a product would’ve existed. Thank you!
DRY LUBE or lithium dry lube
Yea, makes sense to me to use a combination of grease and SAND for the stearing gears - NOT.... Scheeese - AGAIN...
You should always apply NEW OIL on the new oil filter seal. Not old dirty gritty used oil. Who ever told you to use the old oil did not know what they were doing. You have new oil right there. Just a dab of it and you’re done.
I’ve never heard that but I feel like I’ve learned something new today. Thanks for the advice and I will do that from now on. I come from a humble background.
I saw my neighbow forget to fill his new oil filter before he put it on , not good either
@@sissymurphy9620 both of these "tips" are misinformation. new oil isn't needed on the o-rings (makes no difference) and you should NEVER intentionally introduce contaminants into the "post-filtered" side of filters by pouring unfiltered fluid into them. new oil is incredibly dirty straight out of the bottle
@@armedanddangerousdiy6096amazing video sir, thank you so much for showing us step by step.
@@TheOysterjam Stating "new oil is incredibly dirty straight out of the bottle" PROVES you do not know jack $hit about new oil properties....
Interesting video. I assume this full maintenance is done once a year.
Yes. I did it in the spring for this video, but typically I do it in the fall after leaf pick up because the dust clogs the air filter. This way it’s ready to go in the spring time.
Nothing says good "workmanship" as using old DIRTY oil for the new filter seal.... BUT, I just don't care.... Scheeese....
Perspective my friend.
I appreciate the helpful content and chill music. Do you have a list or links to the items you used for the XT1 547cc tune up? Mine is running rough and it's definitely time to perform maintenance. Thanks again.
Thank You! I just went to the dealer I bought it from and they put everything I needed in a box.
Hi.i have sign it's on and off at the lift side of the dashboard in my lawn mower of odometer .I don't know what this means. Can you send me your email if possible. To send to you what I mean. Thanks
Due to spam/fraud reasons, I’d rather not give out my email address. You can post a video on TH-cam or a picture on Imgur and send me the link here if you like.