How To: Tighten A Motorcycle Chain On A Kawasaki Z900
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2022
- A step by step guide to measure and adjust your chain to the correct spec for a Kawasaki Z900.
Follow me on TikTok: bit.ly/3yk20YH
Follow me on Instagram: bit.ly/3bKOm7a
Follow me on Facebook: bit.ly/3eoWz2g
My jacket: bit.ly/3zBHNyA
My helmet: bit.ly/2ZVYXGQ
Helmet visor: bit.ly/389lpAX
GoPro Hero 5: amzn.to/3qyucTa
Helmet Mount: amzn.to/3evVrvh
Mic Adapter: amzn.to/3qEq2cn
Lavalier Mic: amzn.to/3epTa4O
Phone Mount: bit.ly/3l8LLZ1
Spotify Playlists: spoti.fi/2Mu6Wrr - ยานยนต์และพาหนะ
![ไม่ต้องมีที่ที่ให้ฉันอยู่ แต่ขอแค่มีฉันอยู่ก็พอ (Spaceless) - getsunova [OFFICIAL MV]](http://i.ytimg.com/vi/4N8idbxZ-7M/mqdefault.jpg)
Best instruction motorcycle chain adjustment on TH-cam. Thank you.
Also once you put weight on the bike it will make it even tighter. Aim for the middle of spec or towards the looser measurement.
Just a couple notes... You're going to want the chain on the looser side of the spec. If it's tight, it'll wear the sprocket and chain faster. Also, when checking the chain, you should rotate the tire until you find the tightest part of the chain.
Great explanation.Thanks.
honesty, I really l love your vids, really wish you'd keep a full diy maintainers guide series right from the first service till the end... this is my dream bike really will be healpfull for students like me to save up some money by doing diy servicing on this bike !
I’ve got a couple of tutorials on the basic stuff. Check out my channel and if there’s anything else you’d like to see let me know 👍🏼
Very easy to follow along, I'll probably have to do this sometime next year cause mine is taking its looooong winter nap (Wisconsin winters suck SMH)
The wait continues.. 🤣
Thanks for this!! I needed help & boom there you were #lifesaver
@andrew, tention or slack is different on a chain because the sprokets are not perfectly round, so that is why you need to find tightest spot on a chain
Torque wrench should never be used as a breaker bar.
Yes this was painful to watch
Nice video. I have an issue where i can't seem to get the correct slack. As soon as i move the bike ( shocks moving ) the chain goes super tight. If i try to make it loser to take into account this issue then it just stays loose. I must have tried a dozen times and the outcome is exactly the same. Even got Kawasaki to try and it was good when i left the shop and loose as a goose by the time i got home. A half turn on the slack screws for me changes the tightness completely. Its like there is no half measure for m chain.
What size and pitch are the bobbins? Struggling to find some for my 900rs
What mirrors are those? Do they hit the tank?
Every time I get my chain tension where I want it I then tighten my bolts. Once I get them tighten I check my chain slack again and for some reason it gets tighter after tightening the bolts. For me I get it around 35mm of tension and by time I tighten the bolts it is somewhere around 30mm of tension. Not sure why my chain tightens more when I tighten the bolts but it does.
Easier than I thought... scared of screwing it up though 😅
Don’t you tighten until you can bend the teeth on the sprocket when you pop a wheely?
Where did you get the bike stand and adapters to raise the bike? I’ve only seen ones that go on the axle nut.
The stand I got at my local Cycle Gear. The swing arm spools that the stand rests on came from TST industries
also i really love ur bikes color, is it a custom painted or from the factory?
2021 colors from the factory
How do you keep your bike sooo super cleannn, is there a cleaning tutorial??
You’ve confused chain slack with tension. You need to look at the top of the chain when moving it up and down. When the top begins to move / tighten up that is where your slack measurement ends and you begin measuring tension… your chain is now too tight because you went far beyond the slack measurement
@macfattahi1295 yes you are right. I have z900 and i spent many times adjusting it, by pushing it hard down and up, but after watching @davemosstuning videos and others, come to find that the slack messured without boring it tention from the above chain, so moving only without the top one moving.
Another video i have seen showed why the tention is different on different parts. Mostly it has almost nothing todo with the chain itself, but it’s the sproket not being fully centered, so it creates different tention.
I had my adjusted first so i bearly got 25mm (min) with really going up and down.. but that was way too tight
Did you loosen the large axle nut on the non chain side also?
No, there is only one side you need to loose
Are you active on Facebook? I am located in the valley as well amd had a question for you.
Sure, what’s up?
Thanks 🙏 m8
I don’t get the chain tightening because as soon as you jump on the bike the slackness goes
3:44 Classic
I keep mine at 32 mm better to be on the looser side you’ll know if you hold the clutch in at 50mph if you hear wine noice chain is to tight
Never use a torque wrench to loosen bolts. Only to tighten
3:44 hehehhehehe He Said it
Please don't use you torque wrench to losing things ... you will mess it up
Don’t you need to Snug up that jamb nut against the adjuster nut? Smh
Not this bike z650
A standard wrench on a metric! Are you crazy! That ain’t no Harley!
I like doing math