You know during times of anxiety there is something calming about watching someone breakdown, clean and re assemble an engine with dirt as a workshop and sandals as footwear. Hope for us yet.
So I went from watching dudes building pools in the middle of the jungle to watching dudes with flip flops restoring engines. What a great time to be alive.
Looks like they are from South India may be Kerala OR Karnataka ...... I must say they know what they are doing ..... I am really impressed ..... Practical knowledge is what matters and they have that ..... I have seen people who know a lot in theory but don't know a thing when you ask them to implement it :-)
a tue mechanic doesnt use gasket makers coupled with gaskets, a true mechanic doesn't reuse old crankshaft and head studs, a true mechanic doesn't invert the tightening sequence of the screws, a true mechanic doesn't put new valves on an engine without wearing the seat and check if it does vacuum, and the list goes on
Love watching these guys do this sort of strip downs. No fancy workbench or tons of specialist gear, just a basic tool set, an old wheel & a couple of bits of wood to chock it up
I love this guy. Hand tools and a work bench and he can rebuild anything. At least he has been using a torque wrench as of late and on the bike engines I have seen him rebuild/reassemble he had no machine shop work done to them. I would have been worried had he not taken this one to a machine shop before re-assembly considering its a car engine and not just a little 4 or 2 valve small engine he normally showcases. Also notice he replaced the freeze plugs after he painted the block. This guy is doing his best to do things right. He's better than most mechanics I know in the US lol.
Клапана еще бы притёр и было бы лучше, а так они прогорят через пару тысяч километров, и масло за место dikstron 3 5-10 w 40 нужно, которое он залил в коробку автомат льют.
I rebuild engines meticulously in my shop, all machine work done at a race shop. After watching this guy carefully, he used all good practices and updated technologies such as rings, machine finish, and head gaskets/seals. I would absolutely trust this "old generation" engine rebuild for 100,000 miles, at the very least.
i've noticed the torque wrench as well. most of the "mechanics" that work for the dealerships in my area has no idea what i'm talking about when i explain to them.
Given that he rebuilt this engine in a dusty backyard with chickens running around, etc, he did quite a decent job on that engine. A couple of things were missed. Didn't see the ring gaps being checked or the main and big end bearing clearances checked (with good old fashioned plastigauge or flexigauge). But he may have done these and not filmed it. I did see that he used a micrometer to measure the journals. He didn't oil the piston rings before inserting the pistons into the bores. Also not sure if the head was resurfaced or the valve seats redone, but he probably did do this as overall he seemed to know what he was doing, like extensive use of a torque wrench. So, even with limited facilities that Lancer motor will probably run perfectly for years to come. Great little video.
ring sizes checked at 8:08 (dont see why else he would test fit them in there). Didn't oil rings, but oiled bores at 8:47. Camshaft and lifters had definitely been serviced and that wasn't filmed, so I imagine he did a full head service off camera. We only see bottom end and bore serviced in video.
He didn't check the end play so hope that was OK, also the block and head needed resurfacing and the valve seats didn't really look good! A waste of time doing a full rebuild without doing any of that..
actually, I think he tries to show us, he did something, I mean he did engine overhaul. some step missing actually in this video, NOT perfect but NOT bad. Do this Video Again WIth Fully Details with using OME spec. last time you did but not enough. Use your camera suitable Angles. Please work with a clean environment, equipment, Use safety Equipment because this video is watching students and so many people, they will follow you, you will be a model for your society anyway, will see you next time with a perfect video. good luck
Well I don’t think this was an actual engine rebuild video, maybe his meaning of restoration is different from yours. And another big factor that could come into play is they probably don’t have the budget or accessibility to certain important things. Just enjoy the video :)
He's so good at what he does, it's a joy to watch! The reborn engine rejoices! I'm glad you took such good care of my Japanese car engine! Thank you very much! From the Japanese
In Sri Lanka Japanese cars and motobikes are best selling and people love to keep them running they just every last penny for it. Japanese cars and bikes are the best.. good market in Sri Lanka
MITSUBISHI magic. Wow, you guys are mechanical wizard. I am amazed that you guys wear fancy shirts and do serious dirt work and don't get dirty, a true master craftman.
@@JAfonsoNunesMartins10 Just record yourself taking everything apart and if you get stuck you can watch what you did to take it apart and just put it back together using that
Your channel is simply the best Sri Lanakan TH-cam Channel, bar none! As an amateur mechanic my self, I'm beyond impressed. I think you're probably one of the most gifted mechanics anywhere in the world. Keep building stuff
It's funny that people rebuild every nuance of an engine, only to create new problems down the road. I've worked in the power industry and if these were valves or turbines, a careful inspection before returning a part or assembly back into service is always the first choice. If it isn't wearing, that's the first thing you leave be.
If only engines were this easy to disassemble and assemble. You straight up PULLED the crackshaft pully off with your fingers.... So well done editing the video. Looks good and is entertaining.
I wonder what the milage was on that engine? I love to see things being used to the fullest. If it's broken, fix it. If it's not broken, use it until it is, and then fix it. I rode an old Honda XR250 Baja around Sri Lanka, and that bike had seen some miles on it. The clutch went in Dambulla and a mechanic came up from Negombo on a bus and we swapped the plates out together by the roadside. I bought him some breakfast and he hopped back on a bus back home whilst took the road to Trinco. Love Sri Lanka. Loved that Baja as well. Good times.
For some, they lose more money even having this done for them much less doing it themselves instead of just junking it and getting a new... whatever this came out of!
TENNSUMITSUMA the thing is with doing what this guy did you’ve seen every part of your engine and you know it’s perfect unlike buying a used one. And for the people who want performance this is how you do it you take it apart you add performance pistons and all the other goodies crank shaft etc.
The problem with some of you people from these so called developed countries.... Think that people from other places, like Africa, South East Asia, The Caribbean and Latin America are some backward bush whack people with no Brains, quite the contrary. You could learn a thing or two.
Amigo, que trabajo más impresionante, excelente, una maravilla de restauración de un motor felicidades. muy buen video, gracias por compartir. disculpa que no hable tu lengua
Thanks YT algorythm ... 20 mins well-spent .. Remarkable work & craftmanship, mad respect & thumbs-up (i seriously can't believe why so many dislikes on this vid) .. Cheers
Excellent engine for its time, very reliable and quite powerful. The Hyundai Pony MKI also used it. The first Hyundai ever built. My grandfather had it in Greece.
i have seen this, i lived in Sri Lanka for some years and i had an old 1960 mitsubishi jeep (4DR5) the mechanic was amazing about what he could fix and not replace, we in the west truly waste a lot.
This is very informative video, the mechanic is well organized a systematic in everything he do. i love seeing more video tutotials from you.thank you for sharing..
Finally an engine restorer that can afford a f*cking torque wrench! I watched like 4 of these kinds of videos where they just painted the engine, cleaned the inside and did not torque ANYTHING to spec. Great work btw
SUPER robota podziwiam za widzę i co do czego dobre stare silniki jeszcze będą chodziły nie są tak skomplikowane jak obecne niema tej elektroniki przeklętej zwykły prosty silnik na kopułce i będzie chodził następne 30 lat pozdrawiam i życzę sukcesów w pracy .
Good luck doing this with a German engine, probably requires like 200 special tools... love the simplicity and the unpretentious nature of these designs.
Those were the engins I knew growing up back in the early 80s very straightforward none of this high-tech nonsenses. One thing to note is you should have the cooling system connected. because a Engine that is rebuilt tend to run more hot since everything is tight and the piston rings need a break in period. But overall great video!
Very TRue Ricardo .... This engine is really old still uses traditional Ignition Coil with Primary and Secondary coil ..... Ignition Cable too ....... That is my concern too that they ran the engine without Cooling System .... I guess they have only run it for few minutes not hour ;-)
it's realy rare for me to spent my time to comment. but this is an exception. great work man. i like that even when i don't know anything about engine. (y)
![คณะขวัญใจ - นางสาวขวัญใจ [Official Music Video]](http://i.ytimg.com/vi/a8zn5pGlRUY/mqdefault.jpg)
You know during times of anxiety there is something calming about watching someone breakdown, clean and re assemble an engine with dirt as a workshop and sandals as footwear. Hope for us yet.
How he works gives me anxiety lol, no gloves, flip flops, lack of tools. Looks like third world shit
its like I need him to do the same thing with my soul I guess.
@@CraigWinsr probably is but he has skill lol
I watch stuff like this , people doing woodworking , people cooking barbecue and restoring nice shoes while sipping a glass of Maker's Mark.
All the workshops are like this, that's why they charge next to nothing to do.
So I went from watching dudes building pools in the middle of the jungle to watching dudes with flip flops restoring engines. What a great time to be alive.
Looks like they are from South India may be Kerala OR Karnataka ...... I must say they know what they are doing ..... I am really impressed ..... Practical knowledge is what matters and they have that ..... I have seen people who know a lot in theory but don't know a thing when you ask them to implement it :-)
I'm glad I'm not the only one haha
What a coincidence me too!!
@@npanthri Sri Lanka
Yarp. Entertainment sure has a lot of flip flops these days
Dealer: So that's going to be $10K for a new engine
Dudes with Flipflops:
*hold my beer*
And what to say about the shirt he worked with?
*PlotTwist* But the dealer is the guy with flipflops.
th-cam.com/video/IN5GrnZ3zWo/w-d-xo.html
Hello my friend writing with great pleasures,,,,
this is a true mechanic..not what u see on youtube...youtubers have sponsors,money to buy fancy equipment..he's pure skills...respect bro..
But I did see this on TH-cam?
a tue mechanic doesnt use gasket makers coupled with gaskets, a true mechanic doesn't reuse old crankshaft and head studs, a true mechanic doesn't invert the tightening sequence of the screws, a true mechanic doesn't put new valves on an engine without wearing the seat and check if it does vacuum, and the list goes on
@@ktulhu2011 you realise these rebuilds cost less than 1k USD right?
@@kev8943 so if it's under a certain budget you can do stuff upside down or not measure. Fine
@@ktulhu2011 no its either no running car or this!
A truly big thank you for gathering the motor oil in a vaze and u didn't throw it on the ground. Bravo. Greetings from Greece
th-cam.com/video/flVAFTPQkpc/w-d-xo.html
These are some of the most enjoyable videos on TH-cam - hands down! . . . .
*Restoration level: **_EXPERT!_* ⭐️⭐️⭐️⭐️⭐️⭐️
Love watching these guys do this sort of strip downs. No fancy workbench or tons of specialist gear, just a basic tool set, an old wheel & a couple of bits of wood to chock it up
When you see a guy in flip flops, you know he can do anything even reassembling space ship engine and putting it back together is no problem.
I love this guy. Hand tools and a work bench and he can rebuild anything. At least he has been using a torque wrench as of late and on the bike engines I have seen him rebuild/reassemble he had no machine shop work done to them. I would have been worried had he not taken this one to a machine shop before re-assembly considering its a car engine and not just a little 4 or 2 valve small engine he normally showcases. Also notice he replaced the freeze plugs after he painted the block. This guy is doing his best to do things right.
He's better than most mechanics I know in the US lol.
Клапана еще бы притёр и было бы лучше, а так они прогорят через пару тысяч километров, и масло за место dikstron 3 5-10 w 40 нужно, которое он залил в коробку автомат льют.
@Artur Iralin да я думаю не глупые чтобы гугл переводчиком воспользоваться
I would prefer calling him a mechanical engineer.
I rebuild engines meticulously in my shop, all machine work done at a race shop. After watching this guy carefully, he used all good practices and updated technologies such as rings, machine finish, and head gaskets/seals. I would absolutely trust this "old generation" engine rebuild for 100,000 miles, at the very least.
i've noticed the torque wrench as well. most of the "mechanics" that work for the dealerships in my area has no idea what i'm talking about when i explain to them.
Given that he rebuilt this engine in a dusty backyard with chickens running around, etc, he did quite a decent job on that engine. A couple of things were missed. Didn't see the ring gaps being checked or the main and big end bearing clearances checked (with good old fashioned plastigauge or flexigauge). But he may have done these and not filmed it. I did see that he used a micrometer to measure the journals. He didn't oil the piston rings before inserting the pistons into the bores. Also not sure if the head was resurfaced or the valve seats redone, but he probably did do this as overall he seemed to know what he was doing, like extensive use of a torque wrench. So, even with limited facilities that Lancer motor will probably run perfectly for years to come. Great little video.
ring sizes checked at 8:08 (dont see why else he would test fit them in there). Didn't oil rings, but oiled bores at 8:47. Camshaft and lifters had definitely been serviced and that wasn't filmed, so I imagine he did a full head service off camera. We only see bottom end and bore serviced in video.
He didn't check the end play so hope that was OK, also the block and head needed resurfacing and the valve seats didn't really look good! A waste of time doing a full rebuild without doing any of that..
actually, I think he tries to show us, he did something, I mean he did engine overhaul. some step missing actually in this video, NOT perfect but NOT bad. Do this Video Again WIth Fully Details with using OME spec. last time you did but not enough. Use your camera suitable Angles. Please work with a clean environment, equipment, Use safety Equipment because this video is watching students and so many people, they will follow you, you will be a model for your society anyway, will see you next time with a perfect video. good luck
He also did a wrong torque sequence on the crank shaft
Well I don’t think this was an actual engine rebuild video, maybe his meaning of restoration is different from yours. And another big factor that could come into play is they probably don’t have the budget or accessibility to certain important things. Just enjoy the video :)
He's so good at what he does, it's a joy to watch!
The reborn engine rejoices!
I'm glad you took such good care of my Japanese car engine!
Thank you very much!
From the Japanese
In Sri Lanka Japanese cars and motobikes are best selling and people love to keep them running they just every last penny for it. Japanese cars and bikes are the best.. good market in Sri Lanka
@@shivonshivon7743Yeah Japenese vehicles last for a very long time, I do own a Lancer wagon which was made in 1979 and it still runs like a baby.
MITSUBISHI magic. Wow, you guys are mechanical wizard. I am amazed that you guys wear fancy shirts and do serious dirt work and don't get dirty, a true master craftman.
I love to see this good old craftmanship! With minimal tools high results, keep up the good work!
There is something special about a man that can take apart an engine and rebuild it.
That makes me half special.
And never has dirty fingernails
@@yakumiguel 😂😂
素晴らしい！
日本製のエンジンを大事にしてくれて有難うございます。
I think every guy should try this once in their life time.
My plan for the winter 👌
I still don't have a car as I'm only 17 but it looks scary to do this because Idk if I could put everything back together without instructions.
@@JAfonsoNunesMartins10 Just record yourself taking everything apart and if you get stuck you can watch what you did to take it apart and just put it back together using that
@@gastonriquelme9048 wow that's actually very intelligent, I never thought of that
Except Doctors..
Your channel is simply the best Sri Lanakan TH-cam Channel, bar none! As an amateur mechanic my self, I'm beyond impressed. I think you're probably one of the most gifted mechanics anywhere in the world. Keep building stuff
Iv seen this blokes videos before hes actually got himself a torque wrench well done lad
yep
@@defencebangladesh4068 as in he didnt have one b4??
@@chillisdinho he didn't have it b4
This TH-cam suggestion was on point. This was very calming to watch. Almost hypnotizing.
Taking apart and restoring an engine gives new meaning to "welcome to the jungle, baby..." Much respect.
Un gran saludo y abrazo en la distancia hermoso trabajo! Los felicito!
Desde la tierra aislada del mundo!
Venezuela!
Such a simple engine. No ECU. Very enjoyable viewing. Well done.
Simply built-up engine , easily restored with skillful hands. However, complicated ones are not
So happy to find a Sri Lankan restoration channel! Keep it up boys!
Brilliant to see how the engine was restored. Keep up the good work.
I have no clue why but I’m proud of these fellows.
Maybe because they rebuilt an engine??
They did a quite decent job.
Love the fact that this is low budget but the pragmatic attention to detail is Top Quality. (Make it work and Don't fix what aint broke!)
It's funny that people rebuild every nuance of an engine, only to create new problems down the road. I've worked in the power industry and if these were valves or turbines, a careful inspection before returning a part or assembly back into service is always the first choice. If it isn't wearing, that's the first thing you leave be.
@@deanbarrett7180 uh
Я думал что просто помоют и покрасят, как большенство реставраторов, а здесь прям хорошо, уважаю)
dosen't even have shoes but has a toque wrench... respect.
😂
People don't like to wear shoes in hot climatic places
@Jerry Vdm and dosen't, haha
@@kirangouds ppl 0
The man has his priorities straight.
Your work has improved a lot and it’s good to see the new tools! Well done on a good restoration 👍🏻👍🏻
I lowered the machine. th-cam.com/video/flVAFTPQkpc/w-d-xo.html
🇧🇩🙏🙏🙏
There's Jerry Rig everything and here is this guy Restoring everything.
My life is complete.
The idiom is Jury Rig, not "Jerry Rig".
If only engines were this easy to disassemble and assemble. You straight up PULLED the crackshaft pully off with your fingers.... So well done editing the video. Looks good and is entertaining.
주말 근무중에 영상보는데 새소리도 들리고 릴렉스되네요.
응원합니다.
This is nice I love the restoration watching from Zambia copperbelt province kitwe.
I wonder what the milage was on that engine? I love to see things being used to the fullest.
If it's broken, fix it. If it's not broken, use it until it is, and then fix it.
I rode an old Honda XR250 Baja around Sri Lanka, and that bike had seen some miles on it. The clutch went in Dambulla and a mechanic came up from Negombo on a bus and we swapped the plates out together by the roadside. I bought him some breakfast and he hopped back on a bus back home whilst took the road to Trinco. Love Sri Lanka. Loved that Baja as well. Good times.
th-cam.com/video/cEkh2I9uUNU/w-d-xo.html
Muito bom ótimo serviço parabéns pela restauração
Everyone is talking about his flip flops thats how you know hes a legend
Well I change my car oil with flip flop it’s comfortable though. Lol
@@eugenegutierrez5106 But can you restore a engine in flip flops?
i rebuilt a 4g63 in flip flops, just don't drop stuff on your feet lol
these types of videos go a long way to show not everything you think is junk is junk it just takes a little time and knowledge
For some, they lose more money even having this done for them much less doing it themselves instead of just junking it and getting a new... whatever this came out of!
TENNSUMITSUMA the thing is with doing what this guy did you’ve seen every part of your engine and you know it’s perfect unlike buying a used one. And for the people who want performance this is how you do it you take it apart you add performance pistons and all the other goodies crank shaft etc.
That's right I prefer the old cars than the new ones, is all plastic I can't believe. Lol
WOW, what a pleasure it is watching this rebuild!! I know the 78 lancer engine and I think u doing an excellent job!! U R better then a pro Sir !!!
The problem with some of you people from these so called developed countries.... Think that people from other places, like Africa, South East Asia, The Caribbean and Latin America are some backward bush whack people with no Brains, quite the contrary. You could learn a thing or two.
I think this is guy is from soutgern part of india
Love this kind of videos, totally mesmerizing
I am no mechanic nor do I understand how an engine works, but I love watching it.
That is absolutely god damn amazing. A table, a few wrenches, essentially spray paint and some parts. WOW!!!!
I love these videos where people take things and bring them back to life.
You make look easy, But it takes time to Master this restoration of engin. WELL DONE BRAVO,BRAVO, BRAVO.
THANKS
Mantaaap..🇮🇩 Indonesia Hadiiir
I see a lots of progress and new tools. Keep up the good work.
Amigo, que trabajo más impresionante, excelente, una maravilla de restauración de un motor felicidades. muy buen video, gracias por compartir. disculpa que no hable tu lengua
es de la india we, usa google para traducir y listo.
Простой, крепкий, и красивый. Таким и должен быть любой мотор!👍👍😁😁💖💖🥂🥂
Thanks YT algorythm ... 20 mins well-spent .. Remarkable work & craftmanship, mad respect & thumbs-up (i seriously can't believe why so many dislikes on this vid) .. Cheers
Um vídeo satisfatório. Amo mecânica. Parabéns!
O cara manja demais,mas o forte dele e a reforma geral de motos de todas as cilindradas, muito profissional
This is real craftsmanship but working like this in our country would be impossible.
Francine van Zanten I have created a video I want you to watch and leave me a tip 🙏❤️
Ville de Restauration nice clock
Soch or dohc
I am a retired motor mechanic. I say well done that man! I particularly liked the engine stand, or kitchen floor... Whatevs top job bloke!
What a lovely video. You did a great job with that engine. Thanks for sharing
Excellent engine for its time, very reliable and quite powerful. The Hyundai Pony MKI also used it. The first Hyundai ever built. My grandfather had it in Greece.
i have seen this, i lived in Sri Lanka for some years and i had an old 1960 mitsubishi jeep (4DR5) the mechanic was amazing about what he could fix and not replace, we in the west truly waste a lot.
true.My heart melts when good usable cars and other vehicles are thrashed and trashed by means of events like demolition derby and events like those.
I feel in love watching this reatoration... OMG awesome job! A masterpiece reborn...
This is very informative video, the mechanic is well organized a systematic in everything he do. i love seeing more video tutotials from you.thank you for sharing..
Necessity is the mother of invention
You have to admire the simplicity of it.👌
Nice Work my Friend, when you fix it back it's like a new Engine..
@Matthew Morocco i notice it as well. assembly yes, was done, but so what if engine works non properly...
very satisfying video to watch. you can pass the time relaxing while learning very important things. thanks for posting.
I am watching this for a full 20 minutes and 56 seconds....what a time we live in :)
Glad I stumbled upon this! Strangely therapeutic, and to see this is from a fellow Sri Lankan? Nicely done!!
Impressive that he used those tools, good knowledge of engine rebuild.
Your getting better at proper engine building & rebuilding with machining good tolerances & replacing wear parts ; good job !
Finally an engine restorer that can afford a f*cking torque wrench! I watched like 4 of these kinds of videos where they just painted the engine, cleaned the inside and did not torque ANYTHING to spec. Great work btw
This is amazing... flip-flop, in the dirt, bare hands, birds chirping, a kid helping, and voila you have a restored functioning 40-year-old engine!
Engine restoration is like giving life to a dead man.
true words
"Shout out to all my dead people. This engine rebuild is for you"
It’s like giving a new heart
D
pour some of that oil for the dead homies
Mecânico raiz é assim mesmo parabéns👏👏👏👍👍
SUPER robota podziwiam za widzę i co do czego dobre stare silniki jeszcze będą chodziły nie są tak skomplikowane jak obecne niema tej elektroniki przeklętej zwykły prosty silnik na kopułce i będzie chodził następne 30 lat pozdrawiam i życzę sukcesów w pracy .
legend has it , that its still sitting there on the floor running
Can't even rearrange my heart pieces from the last break up and this dude assemble the engine faster than Nick Fury assemble the Avengers. Damn...
ة
boss Iam seeing from Bangladesh, omg you are really the BOSS, love you, please we want more restoration videos, salute boss, carry on, really good job
Really old-school. No fancy machines or equipment.
Honing is pretty precise
I love that this guy just wears a spotless white shirt while working on the engine
I was thinking the same hahaha
This is so relaxing to watch in the late evening
Niyamai bro සුපිරි වැඩක් විඩියෝ සේරම බැලුවා
Man just take my money!!!!
Beautiful work!
after watching all of ChrisFix viceos and watching this dude work on an engine with his bare hands and on dirt its something else
😍😍 Wow dude am crix fix fan too
Good luck doing this with a German engine, probably requires like 200 special tools... love the simplicity and the unpretentious nature of these designs.
Any engine in 1978 dont requres any special tool, maybe Porsh or Ferrari...
Rubbish.
You Guys are not just Good, you are Super Good. Jim Mc Kay Boise, Idaho U S A.
محرك مسيوبوشي ومحرك تيوتا كراون من افضل وأقوى المحركات
عملك ممتاز احييك
Lol. He was holding the exhaust manifold while it started up..he sure moved his hand fast once it heated it up..lol
Yooooo I was watching like the fuck is he doing
He identifies herself as a temperature gauge 😊
17:50
Noticed that too
@@mr.notniceguy7172 HILARIOUS!
Those were the engins I knew growing up back in the early 80s very straightforward none of this high-tech nonsenses. One thing to note is you should have the cooling system connected. because a Engine that is rebuilt tend to run more hot since everything is tight and the piston rings need a break in period. But overall great video!
Very TRue Ricardo .... This engine is really old still uses traditional Ignition Coil with Primary and Secondary coil ..... Ignition Cable too ....... That is my concern too that they ran the engine without Cooling System .... I guess they have only run it for few minutes not hour ;-)
Да нармално
I luv the clattering, rattling sounds of the tools!
Meanwhile, over at the Hagerty channel, they are on edition 20 of a straight 8 restoration🤣
I'm pretty sure he took this engine apart with a 14mm socket and a flat head screwdriver xD
Good luck trying to do that on a VW.
I had a similar engine in an old Mighty Max, and if I recall you could take the whole thing apart with a 12mm and 14mm socket.
thats a mitsubishi for you lmao
@@GooberProductionz lol, on an old aircooled VW, you mostly just need a 13mm and a flathead.
10 and 12mm, if a 4G32 is anything to go by.
it's realy rare for me to spent my time to comment. but this is an exception. great work man. i like that even when i don't know anything about engine. (y)
Great mechanic, I love your work to be respectful you sir
Waoooo! I'm impressed what a work it's amazing
Amazing. I can't even put together a desk i bought from Ikea.
lol
I mean it's not his first time so
they are not made to do that but to be a swedish functional joke
😂😂😂
@@AremStefaniaKq
I definitely like your restoring process, it’s interesting en straightforward..weldone👍🏾...
Alain0581625019
👍
@@aliyaaliys7464 uu
Wow...amazing work, watched the whole clip. My Alfa would need an engine rebuild....
Золотые руки молодец мужик.Больше нечего сказать.
was expecting some visual lazy work as it often goes with restoration channels but this was done very well
I love this guy when He tightened the bolt. Not Amateur.. Good Job
Heem iloveyou
Ótimo trabalho!!! 👏 👏👏👏👏
So satisfying. Wish i had my beautiful lancer with me today. My lancer had saved me in the deluge. Ill always be thankful to god and mitsubishi.
Со старой помпой прикололся =) Судя по окружающим звукам Маугли вырос и стал у волков мотористом.
Молоток паря, нормально сделал!😎👍
New car nhi ab to old car leke apke pass lane ka mn kr rha he kya mst kam krte ho yar bhai 🙏shab
Yeah! TÜV checked "Drehmomentschküssel" torque wrench.Good job. Greetings from Germany
รุผ