Hey man, love the vid, just curious, i assume i have a cracked piston with the amount of blow by I have, is it always catastrophic? I have no tick and no knock, just no power and balance and contribution aswell as misfire for cylinder 1 and 2 any advice helps, thanks
I just finished a 6.4 build, when doing the initial startup the engine sounded 180 out. We just removed the engine to see that it was in time. Do you have any ideas as to why it would sound like that? We're researching and aren't finding anything about it, much less a first start. Please, thank you. @redneckcustoms
I was a little leery of the turbo rebuild until I. Did you get your turbo kit from ford? Do you have part number fot the kit? Also were the compressor wheels balanced when you got them. Thanks for your videos!
Looking to rebuild my 6.4. Blown head gasket but I might as well rebuild the motor like you did. No post lift. Any suggestions for ease of build? Also, when I send the block out. Do I just ask for .20 on the bore for the cylinders? Everything else should be standard size as far as bearings unless damage is present correct? Should I get the head resurfaced prior to reinstall?
Good videos I rebuilt my 6.4 using your videos thanks for that it was running great until about 300 miles in and now I’m getting p0087 code I put new injectors hpfp cam heads airdog any ideas thanks again
@@redneckcustoms5919 Maybe should have said it this way, no video of it running from outside the truck and some pipe shots , lol ‘ for clarification ,but thanks for the response!
Heya is this more of a personal thing you do? Im planning on rebuilding my 2008 6.4L in about 40,000 miles. If you guys are a business id be interested in maybe bringing it to you. how much does something like that cost?
hi, just bought a 6.4 and assuming in the near future i will be rebuilding it. what parts do you use, i saw mahle was decent, but have they lasted ok? they seem on the cheaper end. How hard is it to pull the motor without pulling cab, as i do not have a lift? Thanks
@@redneckcustoms5919 sounds good, thanks for the reply man, i got a gantry, but not a lift, im sure i could ri something up to pull the cab with that to make it easier, just bought mine for $1500
Hey I have blowen 6.4 power stroke planning on rebuilding it my self its gonna be my first so I searched a found ur videos very helpfull
In one of them you mentioned caps and shirts
Was wondering if I could purchase a couple shirts and caps
I found this series of videos very helpful. I know my way around old school stuff but these are a different animal for sure. Again nice work, thanks
Hey man, love the vid, just curious, i assume i have a cracked piston with the amount of blow by I have, is it always catastrophic? I have no tick and no knock, just no power and balance and contribution aswell as misfire for cylinder 1 and 2 any advice helps, thanks
Where you guys located ? I got a 6.4 built rat rod that needs finishing
NY state
Hi I needed my 6.4l rebuild. Where are you located and what you charge?
Western New York and it all depends on what you want done to it
When you rebuild, do you make it better ??
Always
How was the bleeding of the fuel after that? Was it extensive ty
I just finished a 6.4 build, when doing the initial startup the engine sounded 180 out. We just removed the engine to see that it was in time. Do you have any ideas as to why it would sound like that? We're researching and aren't finding anything about it, much less a first start. Please, thank you. @redneckcustoms
Send me a video of it running so I can hear what it’s doing please
I was a little leery of the turbo rebuild until I. Did you get your turbo kit from ford? Do you have part number fot the kit? Also were the compressor wheels balanced when you got them.
Thanks for your videos!
Spoologic I believe and yes everything is balanced
Looking to rebuild my 6.4. Blown head gasket but I might as well rebuild the motor like you did. No post lift. Any suggestions for ease of build? Also, when I send the block out. Do I just ask for .20 on the bore for the cylinders? Everything else should be standard size as far as bearings unless damage is present correct? Should I get the head resurfaced prior to reinstall?
Have them bore it as small as they can, just whatever it needs to clean up. Always get the head and block surfaced before going back together
To make these engine strong , what parts need to be updated ? Thx
Mainly fix the emissions issues. Head studs aren’t a bad idea as well
Do you have a link to the turbo rebuilt kits you use ?
Can you provide any insight how to mount the rebuilt turbos (low pressure to the high pressure) to one another?
Just slide the together, there’s two gaskets that go between them
Just slide the together, there’s two gaskets that go between them
Good videos I rebuilt my 6.4 using your videos thanks for that it was running great until about 300 miles in and now I’m getting p0087 code I put new injectors hpfp cam heads airdog any ideas thanks again
What is the name of the turbo rebuild kit?
No footage of it running? Kinda bummer, but great series any how.
You must not have watched the whole video
@@redneckcustoms5919 Maybe should have said it this way, no video of it running from outside the truck and some pipe shots , lol ‘ for clarification ,but thanks for the response!
Heya is this more of a personal thing you do? Im planning on rebuilding my 2008 6.4L in about 40,000 miles. If you guys are a business id be interested in maybe bringing it to you. how much does something like that cost?
Mostly personal however I’ve done multiple 6.4 rebuilds for outside work. Price all depends on what you want done. I’m located in southwestern NY
hi, just bought a 6.4 and assuming in the near future i will be rebuilding it. what parts do you use, i saw mahle was decent, but have they lasted ok? they seem on the cheaper end. How hard is it to pull the motor without pulling cab, as i do not have a lift? Thanks
Mahle is the best of the best. It is possible to pull the motor with the cab on as I have done it in a wheelchair but it is difficult
@@redneckcustoms5919 sounds good, thanks for the reply man, i got a gantry, but not a lift, im sure i could ri something up to pull the cab with that to make it easier, just bought mine for $1500
Where are you located
Southwestern New York
I got a 6.4 have a couple questions where can we reach you do you’ve instagram
Yes it’s redneck_customs