Ford 300 Inline Six Gets Eye-Popping Off-The-Shelf Power - Engine Power S7, E17
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2020
- Even after 45 years, our antique Ford engine still runs. And after some needed upgrades, it will run like a champ!
Check out the PowerNation store for shirts, hats, and more: pntv.us/lnk_f8a2aba5
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
pntv.us/lnk_3d0d9e0c
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE
CRC Industries
Parts Cleaner & Degreaser - Pro Series
pntv.us/pn_pt_16550_5f60d2b5a...
Forney Industries
Forney 220 Multi-Process (MP) Welder
pntv.us/pn_pt_16549_5f60d28a6...
RockAuto.com
Rock Auto
pntv.us/pn_pt_16551_5f60d3348...
Summit Racing
Harland Sharp Original Roller Rockers
pntv.us/pn_pt_16546_5f60d2067...
Summit Racing
High Energy Ignition Distributor
pntv.us/pn_pt_16547_5f60d2378...
Summit Racing
Hooker Super Competition Headers
pntv.us/pn_pt_16544_5f60d1c0d...
Summit Racing
Offenhauser C Series Intake Manifolds
pntv.us/pn_pt_16545_5f60d1e58...
Summit Racing
SeaFoam Deep Creep Penetrating Oil
pntv.us/pn_pt_16548_5f60d2593...
Matco Tools
MATCO Tools are the Official Tool Supplier to PowerNation
The Industrial Depot
Tools, Hardware, Shop Supplies - ยานยนต์และพาหนะ
![We Put All the Tricks into Newcomer Racing's Big Power Jeep Engine Build [Dyno Surprise]](http://i.ytimg.com/vi/YWcZMjA7ZgQ/mqdefault.jpg)
![จังหวะนี้ - เม้ก อภิสิทธิ์ [ Official MV ] จอนนี่มิวสิค](http://i.ytimg.com/vi/4gQRZCkRyiU/mqdefault.jpg)
Doing a dyno after each part installed "separately" to see the gains is much more intriguing than doing one pull and then swapping HCI all at once. More videos should be done this way,its more "real world" since allot of enthusiasts mod their vehicles in stages.
It'd be interesting to see what kind of gains they'd have gotten with the new intake and the stock exhaust.
Exactly, seeing what parts make the most difference is great.
@@davidthompson7723 definitely would have gotten more from intake and stock exhaust than exhaust and stock intake
Yep - even a reading when they took the governor off, to establish a base line..
@@davidthompson7723 my guess was that was the plan before it broke
Those old 300ci inline 6s were bulletproof.
Ford used them for garbage trucks [super heavy duty] by just adding a forged crank. ['61-'68? iirc...]
I had a ase instructor that did a money for clunkers event where they'd kill the motors on the old cars by draining oil. The f150 kept starting without oil when it should've siezed a long time before. Wait an hour and start it again. I don't do fords, but I swear by this motor through and through.
@@internetperson8146 ive heard the same stories from people that did the cash for clunkers, they they hated doing ford 300s because they were a pain in the ass to kill😂 awesome engines
Just about anything can be bulletproof if it's out of gas at 3k. I've seen diesel engines turn higher.
@@bmstylee I hear tell, the stock bottom end is good to 6000+ rpm.
Definitely one of the best engines Ford ever designed and built.
It may be a good engine for an inline 6 swap? I have an older Supra.
@@ddd228 I love the idea of the that being its something you don't really see
Just rebuilt the i6 in my f100 last year and its just lovely. And holy fuel efficiency i was not expecting.
@@andrewglasgow5355 , well, you just saved an incredible workhorse from the scrap freighter to China. So many people scrap these engines for MORE POWERFUL V8 swaps. I miss the simplicity of inline 6 cylinder engines from GM, Ford and Mopar.
@@charger19691 literally 1st yr knowledge and 22 yrs of lego and all I saw was a lego set made out of metal 🤣 2 hrs out, 10 on the stand then 2 hrs back in. Bing bang boom. I had so much fun. It was a gift from my GPA so i will rebuild it as many times as I need to.
Finally people are starting to showoff all the perks of the ford 300 inline 6. The cummins of gas motors... Also inspired cummins 12 valve.
Funny you mention that.
Onan used the 300 6 in a lot of generators.
They were later bought by Cummins.
@@1978garfield Onan didn't own the 300 i6 design and gas and diesel engines do not translate well to the other ignition type.
@Derrin Eckelmann 12vs rare? They are everywhere
@Derrin Eckelmann idk why people really keep 12vs as most of the time when I see them half of them do less work than my 5hp briggs and the other half don't even run due to the neglect.
@Derrin Eckelmann the 12v just has a fuel solenoid but again letting them sit can be bad for the pumps and seals
I'm liking the inline 6 builds. Keep them coming.
Need a chevy inline 5.
Inlines rule! Then, boxers.
Love to see them run an Aussie ford Barra six
Check out "hemi 265"
agreed
I find this more interesting than another small block anything.
Yes if you feel compelled to do something different. But you will spend significantly more money to make the same power a mild small block makes. See salvage yard LS swaps.
@@bmstylee Then you're just another LS swapped whatever. If someone wants to do something different, let them. Does having only 6 cylinders offend your ancestors or something?
Wild Bill he just said it was more interesting. Not better.
I find it more interesting too. It’s easy for some of us to get bored seeing the same ol thing over and over again. For me seeing the old forgotten engines get a little spotlight time is pretty cool.
It’s not always just about how much power you can make ultimately; it’s just about taking something and making it better. As long as you’re burning fuel and having fun then it doesn’t have to be 1,000+ horsepower.
@@codyleemeece i agree you
@@bmstylee everyone says LS swaps are so cheap there's a shop there on TH-cam and they charge 30k to LS or hemi swap jeeps so it just depends I6 engines are the most powerful engines in the world trackor trailers buses cabover's all commercial vehicles there all I6 engines
Coming from someone who has owned several 4.9s, those things would pull whatever you put behind em, and you couldn't kill em!
And they get much better fuel economy than any other engine in a pickup.
@@drew8256 um no they don't lol. They literally got less mpg than any other engine the things where terribly inefficient.
@@jdrok5026 I agree, and think they are a great motor anyway. Most reliable. However, my current 92 F150 automatic is the biggest dog compared to the 83 F250 4-speed carburated and 94 F150 5-speed manuals. This 5-speed auto has always been a piece of garbage as far as I'm concerned.
@@meandthemrs7403 while they run forever they have issues with the front and rear cylinder having a different wear rate
I have one in my 85.
I drive it state to state no problem.
Needs a little work but the inline 6 is amazing
Years ago back in the early 90's. The drag strip I often went to, a guy had an inline 6 cylinder in a short dragster, like a slingshot. The way it ran, you would of thought it was a V8, until you heard it. It was fast. We went to the pits and got a closer look at it.
legend has it dude is still jamming pens and skrewdrivers into that pocket
Lol most I have EVER seen. If he falls down he's going to puncture a lung.
Ya, whats up with that?
I think it's a hold over from his Days as a Teacher/Professor at the School of Automotive Machine.
lol
That's the sign of a real mechanic. He has all of his fingers still because of those.
Pat's childlike wonder at this engine gives me hope for humanity
Yeah....me too.
Jacob Krzystowczyk : I think his delight in derestricting tge crazy 1 bbl carbs ludicris 9 psi air restriction was what made it for me. You wouldnt run a Lada or Polski Fiat carb on a 5 liter six would you? Um, yesss. Ford did. Thats what stopped them ever blowing up. Air restricted engines. Our 4.9 liter Falcon 302Clevelands made 240 hp gross with just a 2 bbl Bendix Technico WW carb in 1971. What a way to remove half the engine power. Drop half the air intake by making it a 1 bbl engine. Thats what Pat was probably thinking!
Dean Stevenson I get that 100%. Lowering power numbers on industrial and medium duty on up engines extends life. This engine did everything asked of it just like 100,000s of other ones for years. There are times that I wished my F250 had one of these instead of a 460. Torque and reliability are more important to me to hp and racing. Been watching these guys for years. Before TH-cam power nation and power block were just about it for enthusiasts. Pat has always been my favorite host. On the normal scripted builds, you can tell they have a passion. But on this one, Pat really gets a lot out of it and I appreciate that.
Hear that gasp when they removed the valve cover.
@@unicornsteaks6769 Yep. Pretty cool. Hardware vs. software......hardware will win every time.
I love those inline sixes. Naturally balanced by design with the ability to run smooth as silk. I've got the 4.9 liter/300cu.in. inline six in my 93 F-150 with the M5OD 5 speed manual behind it. This is the factory fuel injected version with the old OBD 1 management system. OBD 2 didn't get installed on this engine until 1996, the last year Ford offered the engine in it's pickup line. I've done a few mods by adding a K&N air induction kit, an MSD-6A spark box with an MSD high output coil. I made a custom set of ignition wires by using MSD's 8mm low resistance wire wound ignition wire and wire terminals. I looked for a pre-made set, but it appears that no wire sets of this caliber are available. FlowMaster's single outlet muffler and pipe kit finishes off my daily driver. These few mods have given the old truck what I feel is a seat of the pants increase in power. Let's say a few horses above the factory 175 HP rating and a sound out of the back that tends to turn some heads. The FlowMaster system gives the old six a nostalgic sound similar to that of an old Jaguar XKE... at least to me. While what I have isn't a sleeper, it's still fun as hell to drive with the manual transmission. Unfortunately the factory fuel injection system doesn't allow me to get too radical, so I can't use a more aggressive camshaft, at least for now. There's one thing that I know for sure, though, this engine will outlast the truck itself. It can be said, that this engine is definitely one of Ford's better ideas.
Ford fuel management can be tricked to give it more fuel. Not sure where the the 02 sensor is on yours, but I put a true dual on my 94 bronco with a 302. I put the sensor in on one bank only. It fueled better and my bronco had some serious snot compared to everything out there.
factory rating is definitely not 175 more around 145-150
thats a cool truck them 300s had good torque much more than horsepower there like diesels low end grunt and actually had more torque than the 302. i think the 300 had like 265 pound feet that mated with a 5 speed great truck!!!
@@scout2m448 The HP rating that you've listed is for the old carbureted version of these engines. The boost in HP came with the addition of fuel injection and OBD One, plus the intake and exhaust manifolds were reconfigured to increase flow to suit the new fuel management configuration. After all, there is a lot of displacement to be considered, also, with 300 cubic inches, (4.9Liters), to be had in this inline six, to go along with the added changes to the fuel system. In the world of automotive six cylinder engines, 300 cu. in. is a big damned six.
@@williamcharles9480 I'm really not sure where you found that but everywhere I look It says 145-150hp for all the EFI trucks. And yea it's basically the same size as a 5.0 302 so pretty good.
I built a 300 in line six in 1976 to go in my 61 falcon dirt short track car. It would blow some of the V8 engines on the track away. That engine made a ton of torque. I wish I had a list of the things I did to it. I was 17 years old at the time. Thanks for pushing my way back button.
Can't wait to see more of this 300!!!
I wanna see it ported with a cam in it.
There must be stroker kits and aluminum heads! Even a nice roller cam and efi conversion would be cool
This video was posted today and they hinted at a turbo early on. They aren't done with this thing yet.
@@markbulva4188 unfortunately there are no aluminum heads, least the last time I looked.
@@markbulva4188 what's nice is that it's already a stroker version of another inline 6, however how much further can they stroke it.
I've got such a soft spot for these motors... so many good memories, mine was the most reliable thing I've ever had
Amen brother! I had a ‘80 F-100 and miss it to this day.
all my Fords last pretty well but my 300 was great, also my 2.3 Ranger, darn rust !
i had one that just ate distributor drive gear pins. never figured it out. no bent shaft , turned freely, proper lube. drive pin was hard and fit snugly. no clue. anyway the kid wrecked it .
I learned to drive in my grandpas 88 F150 with a manual trans. Had the 4.9L 300ci in it. He gave it to me when he replaced it with a newer pickup. I was young, teenager, 14 or 15. It was running rough and I vividly remember looking around under the hood in our East Texas field in the summer, wind blowing the leaves like crazy through the trees that had been there long before us, fresh air. That truck was special. Wish it was still around.
A shame a lot of people don't get our obsession....man and machine. All I can say.
One of my favorite all time engines. Extremely reliable with a long stroke for lots of torque.
Starts up after looking like that and sitting for that long, because that’s what 300s do! Easily top 5 favorite ford engines of all time
Almost doubling horsepower and torque, without tearing anything apart. Definitely looking forward to more of this build
This inline 6 build is where it's at!
More content like this please.
Ps. Thanks for not including the monster truck announcer.
The issues with the 300s was ability to flow.
The heads weren't made for flowing well, and if you fixed that, they made power even with no turbo
Actually you can take a set of 302 Boss heads, chop a cylinder off each, weld them together and you're good to go. Lol
A WR 1/4 mile was set with that setup.
I've always wondered how you can run a 300 at full throttle day after day pulling heavy loads and not destroy the engine. It appears the way it was designed, full throttle from the factory is actually closer to 60% of potential. Pretty smart, really. If you want an engine to last forever, restrict intake and never allow it to work hard.
6:45 that's why you use an old pad to help compress the piston
Right I was wondering if I was the only one that thought that 😂
That's the best way and adding a little length to the handle on the c clamp works wonders
Works for me... everytime...
Yeah, that tool is for the guys that already bought everything else off "the truck" lol
I've never done it any other way. This guy is treating us like we are Sammy Sausage-head.
Anyone else amazed at how much he fits in his pocket?
When you changed the old points distributor to the new High Energy GM unit capable of 60,000 volts, you didn't change the plugs to accommodate the higher voltage spark. We've gained HP with a change to E3 diamond fire plugs, and even more HP with the addition of an MSD 6 ignition box that fires the plugs 20 times per revolution up to 3,000 rpm. More complete fuel burn to utilize the power from every drop of fuel. The emissions dropped drastically as well since there was very minimal excess unburnt fuel in the exhaust.
I was thinking the same thing. I'd opt to change to Iridium plugs with sizeable gaps. The spark plug gaps when running points are pretty narrow.
Fabulous step by step build with easy to follow progression. Loved the power gains after each step. I think most people would have loved this Engine in their truck with that last build alone.
That could be the biggest NA percentage gain in power they’ve ever done.
Well when you only make 80 hp it doesn't take much.
@@bmstylee they also pickup up 80hp with an intake swap
@@bmstylee you been negative on alot comments. You must got smoked by a old 300
@@zachutson7205 no. I'm just not a fan of people making something that is a horrible performance base sound like it is the best thing since sliced bread. It's not a 2jz. There is a reason this thing is extinct.
@@bmstylee it was a industrial engine used for generators and such and for bullet proof reliability. Of course it's not going to make alot power. But with the basic upgrades they made doubled the power. What a engine.
Ill take all the 300 big six content you can give me. Go whole hog on this one guys.
absolutely love this 300 series. I am currently redoing my dads old f250 that had a 460 and I am changing it out for a 300. Hoping to get 200 horse an 300 torque.This series gives me lots of hope!
Keep the 460
I know this is an old comment, but if the 460 still runs, I'd keep the 460 and use a 300 for a different project
When are you guys gonna post the rest of the 300 motor build!?
I wanna know this too.
Right!? Ready to see that turbo bolted on!
I want to see more I own a truck with this motor it is awesome
Debuts jan 28th. So next week
its up as of feb 14 (today is the 17th)
I love the Ford inline 6! One of the best engines ever, Id love this combo in a old square f150!!!
@Eroc I have a 1977 f150 with a 300 in it. It's backed by a 3 on the tree transmission.
😂 That why you use one of the old pads to press the pistons back into the caliper. What ding dong tried to press the pistons with the c clamp end?
Exactly. !!!!! Old pads for the win
I thought. What mechanic would buy such a useless tool ?
Tickle,
like the others I was thinking the same thing. I agree that example with the C clamp was stupid.
Great post SIR
Glad I’m not the only one. In fact if you have to crank a C clamp so hard your hand is sore then you need new calipers!
@@dodgeguyz If you haven't lost any break pressure it can make your hand sore. Mine at least. Still, a useless and likely overpriced tool which doesn't seem to require any less difficulty.
Fantastic work! I really find the inline 6 build interesting. AND - great job doing runs after every upgrade. That's way more interesting than just doing all the mods and a dyno run.
Hands down 1965-96 ford inline six is the best engine for durability, simplicity and reliability! Hey and standing in the engine bay while changing plugs is the icing on the cake.
Definitely my favorite build so far from you guys. Hope to see more on this!!! I've added basically the same mods to my 300 in my truck, and it really woke it up!
You forgot marine applications. Thousands of these 300/6 where installed in boats.
And in airport equipment.
What boats?
@@wisevision2981 Chris Craft, Carver, Monks. And many others.
Thanks! Really liked the step by step process of measuring between each modification. This is the first video of yours I have seen. I’ll be watching more!
I had a '69 Econoline with the 240 version of this engine. At the time (1978) the only performance improvements I could find were a set of Doug Thorley StreetTubes. Picture 2X3 Dual Exhaust.
That SOUND when you let off the gas was the highlight of the experience. This brought it back in Vivid Color!!! I used to purposely let up in Tunnels...
Finally a good engine
I see a boat anchor.
@@bmstylee sounds like someone got gapped by a 300😂😂
@@bmstylee 😯
I see the engine that got your parts to you on time in the ups truck back in the day.
Barra :)
It's a perfect off road engine, having all that tq just off Idle is great for any truck or bronco!!
I had an 84 bronco with a 4sp and the 300/6, it was a billy goat... good on gas too!
I love the 300 six. Still run them on my farm. What really restricts these engines is the heads. Open up the intake and exhaust ports.
Power Nation , please continue with this project.
.
I just happened upon this and found it extremely interesting in that many years ago, about 45 to be near exact, I had been a long-time fan (and owner) of Toyota LandCruisers. My first new one was in 1966 and subsequently owned 6 or 7 of them, always using them to their limits off-roading and racing in the Pacific Northwest with the Columbia Roadrunners (loosely called "jeep") Club (mostly Jeeps, a Scout, a few Broncos, Chevy Blazers, etc. Early on I had my dealer replace the engine on my second new one with a new Buick 401 cu in V8 , only the second conversion in the entire NW (I heard that a guy in Seattle had put a 389 Pontiac in his being the first conversion) soon after chevy v8 conversions of all types were showing up everywhere. My machine then was quite impressive with other upgrades and huge (for the time) Implement tires for sand use. Later with another new rig (I lost count of the sequence number) I came across what I thought to be a HP 396 Chev motor, tore it down for rebuild to find it a HP 427 ... but due to some problems when first ran in the rig it galled some cam/lifter surfaces due to incompatible materials used by the builder. About then a friend in the club working as a mechanic at the Chev Dealership found that GM had just released their first Big Block HP "Crate" motors to the public, a couple of us jumped right on that deal. His in a Chev Suburban and mine replacing the 427 ... these were LS6 454 450HP engines, the first and last of the "MuscleCar" reign ... making a long story shorter (as I am just reliving my youth, I am 80 now, and know you readers are not at all interested) ... eventually I "outgrew" the racing to that degree (100yd Sand Drags) and just recreated stock engine rigs ... always marveling at the great torque performance of such a small engine (135HP) ... wanting to upgrade to a 292 Chev 6 cyl, preferably the Ford 300 cu in ... well modified of course ... but never got around to it. ... so after so many years of not even thinking about it all, along came this here article ... wow! Had I ever known then what could have been I sure would have done it!
Thanks. I always love a story.
Me to.
I love it. I can't wait to see more. This eingine is something I have worked with since I was 12 and I'm planning on putting one in my 77 f150 supercab.
Take our User Survey: rtmproductions.survey.fm/2020-user-survey-youtube
I love this channel, the dyno pull after each mod is a nice touch. My first car was a 1989 civic. It had a 1.6l NA 4cyl that produced 168hp off the shelf
I'm very pleased to see an older inline build. This is something I've wanted to do for a long time myself.
Your build was fun and educational adding improvements incrementally. Looking forward to more on this build, SUBSCRIBED!
I love the incremental testing. THIS is how much a header is worth - THIS comes from adding a decent intake...the ignition was a surprise. Points should have been able to handle that rpm and load. The original must have been completely shot. BTW if anyone is looking for one that hasn't had the balls beat off it, check out the mid '80s Ford econo-stationwagons. They actually had these jammed into that little engine bay.
Which econo-wagons would those be?
@@413x398 they were never installed in cars. The 80’s passenger cars had the 200ci inline 6...a whole different turd. 😂
@@413x398 Hang on - let me see if I can get an ID.
@@413x398 OK, got it - mid 80's Ford LTDs. Sound weird, but they're not the giant dinosaurs from the '70s - they're a Fox platform. Don't know the exact year. An ex-girlfriend "volunteered" me to work on the thing for a bunch of nuns (yes, this is true and yes, she was hot enough to get away with this behavior, for a while)
@@nferraro222 You need to do some better homework. These tall deck inlines were not ever put in passenger cars. The low-deck inlines (200) were phased out in or about '83 and replaced with the Essex, which was a 3.8 liter (232 inch) VEE 6, a whole differ animal with aluminum heads. Please from making statements without verification just for the sake of throwing out a post. Thank you.
In 1979 I bought a brand new Ford Econoline with this engine, with 4 on the floor. Loved it.
Me too, mine was an '82.
I’m original owner of 1979 Econoline 100 with 300 cubes and manual four speed on floor. Yup, that’s what I ordered. Currently has about 280k miles. When the exhaust manifold started whistling I called Clifford. Got triY headers and 4 bbl intake. Runs great !!
Never pulled the valve cover yet !!
Never seen another like her !!
Treated her to a Maaco paint job last summer. Good for another 40yrs. That’s my baby...
Great! I was hoping you would do some more with that 300. What a great motor. I love that Offy intake.
...Its your second most watched video in the past month...you should probably put out the next installment of this beast! :)
...please
Man I can’t say enough great stuff about all that you all teach us. So , great job fellas. I recently bought a 1999 s10 blazer four wheel drive that only had two owners and they took great care of it. I just lucked out on this thing. It ran great and the engine compression was 165 to 170 psi on all six. Cylinders. It had a leak in the radiator and needed a intake gasket. I’m disabled and I’m 63 now and I’ve done all my work since I was 15 years old. But I bought a top end gasket set and a new radiator. I installed a radiator during a hot day and I had a bad attack with my heart from the medicine I take it makes my blood get thicker when I get over heated. I love these little s10,s and happening across this one was a blessing. I was gonna let my daughter use it to go back and fourth from college. But when I had that attack it normally puts me in bed or the hospital for days at a time. So needing to get this s10 going I sent it to a so called machanic. All he did was put some radiator seal in it. I had drained all the old old and put a new oil filter on it and knowing they would flush the block out like I would have I didn’t put oil in the motor. Just put the oil and antifreeze in the vehicle for them to put in once they put the new intake gasket on. But they called and said it was ready and I went to get it and he actually tried to buy it from me and bragged on how nice it had been taken care of. But I paid him his money and got in it and crunk it up and started home. All of a sudden it started knocking and I looked at the oil pressure and it was flat and the temperature was pegged. Just before I could turn it off the motor locked up. First thing I checked the oil and there wasn’t any oil in it or no water in the radiator. I looked for leaks and there wasn’t any. Come to find out they didn’t put oil or water in the motor. I had to take him to court and only got back the money I paid for him to put the intake gasket in. Which was right at 800 bucks. A perfectly great engine blown. Now I’m disabled and have been since my stroke and heart surgery. I only get less than a thousand a month for all the years I worked. I’ve looked for a engine and I can’t afford anything I have found. I’m out begging people for any short block that anyone would love to just give away. I can use the other parts from the motor and I can rebuild a short block. It may take the rest of my life to do it but I’ll die trying. It’s been a very hard life for a strong young hard working man to get knocked down to his knees at such a young age with kids to raise. My wife takes up all the slack along with what the good Lord blesses us with. I hate having to beg for anything but this was for my daughter and now my dream of giving her something nice is shot. Have y’all got an old 4.3 laying in your junk pile that y’all would donate to a old man trying to keep a dream. The eighth vin is w if y’all or anybody could help. Man it took me two years to save my pennies to find a little blazer like this. I’ve been so made since they blew this thing up. I can’t even keep my blood pressure down. But thanks for taking the time to read this. Y’all keep it between the lines. John.
I did most of these upgrades to my first truck. 1982 F250. Yep you could get a straight 6 in a 3/4 ton back then. Headers, intake, 4 barrel Holly, hotter cam, and heavier valve springs. It woke the old girl up!
Chevy, Ford, and Chrysler all made fantastic inline 6's!
took the 250 6 out of my van,dropped a 292 dead stock 6 back in,started it up and it burned rubber in reverse,scared me,as this van never chirped the tires before,drove it for another 50,000 miles with many oil changes, sold the engine to a guy in grand prairie texas,its sitting in a 58 chevy now,don't junk these engines 6 in a row will go
@@bigboreracing356 In another league tho.
They did. I'm a Chevy guy. But I like the Chrysler first for it's durability and flexibility. It fits cars and trucks. Ford second, not because of quality, because I think it's the best, it just don't fit cars. That said, there is nothing like driving a ford 300 truck. Chevy third not because it is crap, it's just "meh" compared to the other Chevrolet engine options.
@@bigboreracing356 yeah but you can't pull up to the car pumps and pump in whatever is cheaper,and yes cummins makes a indestructible engine,no arguments there,to me the 3006 and the 292 are the king daddies in inline pump gas circle,454 and 396 parts fit the 292 and 327 pistons go right in,chevy loved interchange,me to
@@bigboreracing356 1 million miles to me is indestructible,have a nephew who has one, 12 valve with many oil changes it has 713,000 miles on it,its been to the moon and back,we'll see if it makes it back again,low rpm, brute torque and no timing chains,all gear driven makes the difference,i say indestructible
I am "patiently" waiting for the final build and parts sheet, theres a sleepy '89 in the driveway thats ready to wake up.
Back In my drag strip days, 50s- 60s there were teams that built GMC 6 cylinder bus and truck engines. A lot of teams were working on flat head V-8 s. The Jimmeys were powerful and you couldn't break them.
One of my favorite builds of all time!
Yeah we all love a 800 HP V8, but these 300 Fords are absolutely amazing!
Probably the most durable and reliable gas engine ever made!
Hope we get more builds of interesting engines like these, the Chrysler slant 6, etc
Would love to see you guys build an old IDI 7.3 diesel (especially one of the rare factory turbo engines from 1993!) or even go big and bad with a 2 stroke Detroit!
One of the cooler engines to build up. Great episode guys!
My Dad had this one in an Econoline van. It was the easiest oil change on the planet!
The filter just hung on the side of the block with clearance at least 6 inches anywhere!
I've been watching this "channel" since it began when I was a teenager back in the 90's. Still think I'm that same teenager sometimes, until the next morning when I can't move lol. But, love watching you guys still. Thanks, for the many years of entertainment guys!
Wow. You can really tell this guy knows his stuff. Just look at all the stuff in his shirt pocket!! That's a pro for sure:)
Great video !!!! I'm a big fan of inline 6 cylinder s. I had a 292 straight 6 in my 68 chev C10 when I was a kid. Back then there was a company called Clifford Research - their moto 6=8. Same idea - let the engine breath. I'm excited to see what you guys do next. Keep up the great work !!! Cheers
He gets extra 10hp for every pen in that pocket protector. Lol. Good job guys keep em coming.
I've a '78 Econoline, same engine, 3 on the tree. I just replaced the manifold gasket... 350k miles, still runs great... but yeah... it could use more torque and HP... and I'm sure mods would not affect this engine's integrity. A remarkable engine. I will have this van for the rest of my life. Parts are cheap, and available.
I am very curious about Clifford Performance, who specializes in mods for straight six engines. Check em out.
I've got a '78 van with the 4 speed OD on the floor, a 9" locker in the back, 300 with carb and headers and over 300K miles and love it too.
I love how this motor is being built and Dyno tested. Showing everything in incremental parts is very helpful for the common guy looking to build a motor like this. Build everything like this!
Maybe a camshafts upgrade could gain maybe 20% more in power.
and after install rev it up to 5K.
@@grad0n Actually they can go to 8k rpm, search "Ford TC Engine"
Exactly what I was thinking, some springs and a cam would really wake it up, especially with that 4 barrel carb.
It could very easily kill torque down low if you did that. Nothing a turbo can't solve.
@@losergamer04 if you were to put in a cam that revs to 5k or so you wouldn’t be losing much if any.
Anyone who loves cars and trucks knows the Ford 300 inline 6 is a workhorse. I didn't realize they made them all the way to 1996. Thanks.
I was a Ford parts guy starting in 1978, and ran at one point anything with wheels. The engines were incredible! Aside from lifter cover gaskets, they seemed to never need anything but normal maintenance stuff: filters, plugs,etc.
They were, quite literally, bulletproof. And the industrial versions?
Aside from draining all fluids, I can't imagine how you could kill one.
Been 2 weeks i hope they are still working on this. More excited about this than the other projects.
Gotta be honest, this is probably my favorite engine you've messed with.
The 6-300 was my first rebuild with my father. He said if you can build it you can get a car. Smart guy got a free labor rebuild and never had to help me fix all the junkers i drove.
I'm rewatching this, so I know how this engine ends up. Its evolution is one of the coolest builds ever. Bravo guys! How about a 2300 turbo build next? I'd love to see the numbers you could pull.
Damn...almost doubled the horsepower by swapping out that pile of an intake manifold and carb. Now THAT'S a result!
To complete your collection, get y'all hands on a Ford Barra engine.
Also that meaty ford6 jumped from 88hp to 166hp with JUST three bolt on's is what a lot of people do with their own cars before going big buck builds and you guys should keep presenting your builds like this. I would like to see you guys build up a Honda 1.8 to 2.4 four banger like this.
My first truck was a 81 ford f150 it had a 300 straight 6 that truck had a lot of power, i worked this truck so much, hauling hay, cut wood and deliver ricks of wood to several people each year around a 100 rick each year, i wish i still had this truck
I've long had a soft spot for the Ford 300. They seem to endure so much and just keep running. Like all straight 6 engines, they are very smooth running too. Great choices for farm trucks and other vehicles that spend more time working than commuting. I have to say I'm surprised to see the power gains that were achieved. I have to wonder what effect the increase has on durability and longevity.
When compressing the caliper pistons, do it before you remove them, using the old brake pads to keep everything square. That's the way I've always done it.
Same.
I've always done the same, not having to worry about damaging the old brake pads.
i do the same thing with a big flat head or old tire iron before removing calipers
And always -always- open the bleeder first. Otherwise you are pushing the most contaminated fluid back up through the system, through the ABS valve, through the master cylinder, and causing headaches for later.
i didnt know of any other way ! serously , i always thought thats how you did it , then discard or save for the trade in
2:08 Pat is more happy than a kid in a candy store for that old straight 6 running. I Love it.
I have had two Ford 300 inline pick up trucks and never knew how low powered they were. Yes they went on and on forever, but low powered....wow!
To jump from 88 hp. to 166 hp. with those simple mods is impressive.
That old motor runs so smooth and no engine rebuild.
I look forward to more of this story.
Thanks for a great video!
That thing has almost full torque from the bottom. It was definitely engineered to pull from a stop.
The beauty of an online six. Lots of torque
Torque is modest compared to the 302 V8.
But having it all right off idle is 4.9 magic.
I catch myself coming to check in every day. So exited for the next episode. Y’all ever need a third character I’m your man. I love those old straight six.
Love this video guys! My best friends dad had a 300 fuel injection that had 700k miles documented!!!!! In a 92 f150 5 speed 4x4 that he bought new. Unbelievable dependable engines!! We just swapped a low mileage engine in and shes ready for battle!!
I have had a couple 300 sixes in f250's. Great engine. Love what these additions do to it.
Nearly a 5L gas i6?? Holy heck! And here i thought the Barra was a chunky boi!
Barra is a chunky Boi, this Boi is a mega chonker
Im thinking about putting a barra in a lotus elise, or fab a replica cobra to be mid engine, do u think itll fit?
@@T0YCHEST 300 is not a very large engine, just look up the dimensions and compare them to other engines
farcere barra and 300 are the same? I never seen a barra but i hear they can make 600hp na easily
@@T0YCHEST barra up to 2 to 2,500 hp now
There's something wrong with that engine. All Ford 300/6 engines are supposed to leak oil out of the side covers. It prevents rust of something.
HA HA HA...MINE LEAKED AT THE CAM GEAR COVER BECAUSE THE POWER STEERING BOLT BROKE OFF(???) AND THE BRACKET WORE A HOLE IN IT LEAVING 7 QTS OF OIL FROM IOWA UP INTO RAPID CITY S. DAKOTA...I WAS THERE A MONTH AND A HALF TRYING TO FIGURE A WAY TO FIX THIS LEAK...EVEN WENT TO FORD FOR THAT COVER...N/A...OH CRAP...But with a Windshield chrome moulding clip and URETHANE...I FIXED IT...IT WAS SOLD TO PIK UR FART YEARS LATER...STILL SEALED...
haha, mine never actually leaked that much oil but it did seam to think that the power steering belt belonged on top the battery.
@@Black70Fastback Yeah, I had a problem with the serpentine belt. Turns out all the parts are different for the pickup and van versions.
If they can't leak,they will bust....
The 6.5L Diesel (Chevy) had extra rust protection on the same type or rust prevention system
Great video.
I swapped on a Bosch mechanical injection from a Benz gas 6 with a welded up intake manifold. ( per Ak Miller)
The pump needs more teeth on the rack, but WOW !!!!
When you do the build, the 240 head has smaller chambers. Your industrial engine may have propane pistons ( 9 1/2 )
Great video guys! The step by step power test is really interesting. I had a 300 in my '69 F100 with three on the tree. Most reliable old car I ever had. It basically never stopped running. No timing chain either - just two intermeshing gears. One old guy told me the transmissions are tougher still and will outlast 3 engines. I did the intake (Clifford 6=8 intake) and header swap with an Autolite 4100 and put glass packs on it, sounded like an airplane with that howling straight six sound in this video - definately different than a SBF. I think this is the engine that the Ford Bronco's won Baja with. I'm a Ford guy but would love to see you do similar with the other American straight six icon - the Dodge slant six. I think either of these engines will be running 50 years after nuclear apocolypse! I got it used, and put nearly 200,000 miles on it before rebuilding it.
The same goes for Chrysler’s Slant Six Engines!
They were both starved and keep running anyway.
63 Dart 225 push button would keep up with my 73 318 Dart auto.
@@FredTheLutinoCocatiel A more fair comparison would be an earlier 318 73 had low compression (8.6:1 vs the earlier LA-318 with 9:1) and was pretty choked up compared to earlier variants. Not taking away anything form the /6 as it's one of the most bulletproof engines ever created, these Ford 300s and AMC's I6 were right there with it.
@@GregHuston I have a 1995 f150 and ford bronco 1987 whit this engine and. They are grate on gas mileage also easy to work on it
The slant 6 is absolutely a great engine, but the 300 Ford is a little stouter in a pick-up. I've owned and loved both engines ,but the Ford does have a little bit more grunt.
Finally, I've literally got the same engine that had been rebuilt with a small cam, but they put that stock single barrel carb on it, I've got same intake and plan on using a Holley efi with it and the HD exhaust manifold, should be good for close to 300 ft lbs of tq just off idle
Im building my 2f landcruser engine, for the induction im gonna do like david vizard did and go with three 2" su carbs.
He said it was a virtually unstallable engine, and he gained 35 hp on the top.
Any reason you’re going to a HD manifold instead of EFI split manifolds?
I installed the Offenhauser Dual Port intake on my 300. It gives better torque numbers. I also installed a Comp Cams 268H cam, Holley 390CFM 4bbl. I tried bigger carbs and gained high rpm horsepower but lost some torque. The 390 4bbl seemed to be the best choice for my purpose.
@@FRLN500 what are you running the motor in?
@@tylertimmons5543 I'm leaning towards thr efi manifolds now but just for simplicity I wanted the HD because I wanted to go with a turbo eventually and it would be easier to plumb, and headers heat up the engine bay and I do a lot of trail driving, it does awesome at low speeds and I'm avg 16 mpgs with the single barrel carb but it'll drop when I make the swap!
I had that engine in my 1982 F150 Custom and even without any upgrades it had insane torque! With the 4 speed manual, the 1st gear was a bull low, I could pop wheelies!
when i was in my fun car days, i met a guy that had one of these and he modified it and was blowing away some heavy
duty stuff in those days, this engine in its day was awesome
When will we see the rest of the build out, really looking forward to this!
O yeah super charger on that and u got some nice pony’s from that engine
Been waiting for this one ever since i seen the slant 6 video.
Had a 93 f150 with a 300ci inline 6.
What a great engine.
Reliable old work horse.
Did the same to my '84 300-6 back in the day. Night and day difference. I used Clifford intake and headers with a 500 cfm edelbrock. Truly unbelievable power wise and reliability.
“And even if you like imports, that’s okay too”. That made me laugh and imports are my favorites lol.
When you turbo these things, they turn into diesel engines. Nuclear torque!
Oof, I've seen the vids on here.
Bigass lump of torque around 425-450 foot pounds at some ungodly low rev like 2300
funny, the stock chev 454 we built had 900 pounds of torque withe the crank we used.. at a stop you could put the 2 and a 1/2 ton duelly it went into in 2nd let out the clutch with no gas and it would steadily creep up to 20kmh lol
towing at 32 foot avion trailer you could put in first and let off the clutch with no gas, thing wouldn't stall.
but the main saying in the drag racing indy is "you can only beat cubic inches with rectangular dollars" meaning my stock big block can never be beaten by a small block unless they spend 10x more on it. blower.. turbo... nitrous... etc...
@@harleyme3163 yes you are right. The small block builds become insane to even approach the numbers of the Big Blocks when they're loafing.
@@spacecat7247 Sooo not the point here bud
@@harleyme3163 "the "stock" 454 with the crank we used" ??? everybody knows that 454's put out 900 stock..., right?
Back in the 1960's I remember reading lots of straight six rebuilds for high performance. I always wanted to try to build one.
Really enjoyed that. Love that you did them one at a time.
I wanted to see the guys tune the timing curve on the 300 6 FORD
The governed engines have a too small earlier YF Carter pointing in the wrong direction. Normally the truck engine makes over 130 hp gross on a dyno. The stationary engine...a lot less.