Black 08 Ls3 a6 Vette vert Kooks with race cats, SLP loudmouth and Toyo r888r's out back. 11.8 @ 121MPH. Broke a half shaft and needs the other replaced. Would pick up 5 tenths with 2400 stall per Corvette forum.
FYI, if you are 2010-2013 you have factory launch control. Put the car into competitive mode, first gear clutch in and WOT. it will hold rpm and control the traction off the launch to keep you from spinning but still put power down and go A-B. It's different than traction control in that it will not kill all power to kill wheelspeed but rather control the wheelspin if present
Reviewing your dyno results, there was no power drop up to 6300rpm where the pull ended. Stock rev limit on these motors is 6600 rpm, I'd recommend really revving it out, you'll be in a better rpm range after the upshift as well. Also there seemed to be a lot of wheel hop when you were spinning, might be good to look into some rear end work. Interested what times you could get with a good launch and good track prep!
Nice C6 man I always liked the C5’s but I got a 3v to screw around with. Seems like your C6 should have a lot more in it bro when it’s dialed, I see a lot N/A 3V’s running those times or faster. Can’t wait to see you run the track again keep it up.
I took my 01 Z out there when it was 80° at night still and went 12.61 bone stock right off the highway, no prep, OEM tires, first and only pass. They booted me for no helmet. I told them I wouldn't go faster than 14.0 😂.
@@CamMarz it works well for me. I have the 6 speed auto with a blower. It's a little slower off the line, but it keeps traction down better when youre not using drags.
Black 08 Ls3 a6 Vette vert Kooks with race cats, SLP loudmouth and Toyo r888r's out back. 11.8 @ 121MPH. Broke a half shaft and needs the other replaced. Would pick up 5 tenths with 2400 stall per Corvette forum.
I believe it, my times were weak! Driver error lol
FYI, if you are 2010-2013 you have factory launch control. Put the car into competitive mode, first gear clutch in and WOT. it will hold rpm and control the traction off the launch to keep you from spinning but still put power down and go A-B.
It's different than traction control in that it will not kill all power to kill wheelspeed but rather control the wheelspin if present
That's funny that you bring that up man, I found out that my car had this feature a couple weeks after the track and I was so mad at myself 🤣
@@CamMarz lmao, I randomly seen mention of it in the forums. Works pretty damn well even on the street
Is this just for grand sport?
@@RobsterxHD no, any 2010+ Corvette thats a manual. I believe Camaros and Cadillacs too
@@dylannoack I’m bout to try this right now you are a blessing sir
Reviewing your dyno results, there was no power drop up to 6300rpm where the pull ended. Stock rev limit on these motors is 6600 rpm, I'd recommend really revving it out, you'll be in a better rpm range after the upshift as well. Also there seemed to be a lot of wheel hop when you were spinning, might be good to look into some rear end work. Interested what times you could get with a good launch and good track prep!
Yeah I was definitely short shifting it a little!
What read end work would u suggest
Your car sounds amazing
Thanks!
What a way to start the video with a stall lol but 🔥 🔥 vette looking nice
Haha I post my L's 😂😂
Nice C6 man I always liked the C5’s but I got a 3v to screw around with. Seems like your C6 should have a lot more in it bro when it’s dialed, I see a lot N/A 3V’s running those times or faster. Can’t wait to see you run the track again keep it up.
Yeah tires were my biggest issue (and inexperience) hopefully next time around I can get it in the 11's
I took my 01 Z out there when it was 80° at night still and went 12.61 bone stock right off the highway, no prep, OEM tires, first and only pass. They booted me for no helmet. I told them I wouldn't go faster than 14.0 😂.
You're a LEGEND my dude 😂😂
Good runs bro 😎
Gonna have to do some rolls some time, cause currently I can't compete from a dig 😂
Can’t wait to track the 3v and see what it can do before I tear it down and slap this turbo on it
Track is so much fun bro!
Hell yeah!
Great video and channel. What tires do you have on their?
Thanks! They are a set of Bridgestone potenza's. Not sure on the exact one, but the tread ware is pretty low so they are aggressive
beadlocks would look sick on your corvette
I agree, only thing holding me back is wanting to track the car. But FUCK it would look so good 🤤
Esta muy padre tu carro y el mio es c4
Your car has launch control. 💁🏻♂️
I found that out after the time of recording haha
😂
Never surprised when a Vette beats a stang……Corvette>stang
Try a second gear launch while in "competitive mode".
Gonna have to try that, thanks for the advice!
@@CamMarz it works well for me. I have the 6 speed auto with a blower. It's a little slower off the line, but it keeps traction down better when youre not using drags.
Good job next time you do better I like the car the way it sounds