I’m extremely happy to be able to now provide my viewers with a discount to my favourite detailing store. carzilla.ca/?ref=Tg5JZODH Use discount code CARDETAILING5 at check out for 5% off.
Thanks for the video - very clear. I have to say that new foam lances have had a lot of video coverage in the last couple of years, but your video is the first that suggests flushing through with clean water after use will prolong the life of your lance. Well done! Subbed.
I just got mine in the mail today and I'm super excited to use it for the first time tomorrow. I changed my orifice out to the 1.1mm tho. Some other reviews have shown that to be the better size for smaller pressure washers. I have a craftsman 1700 psi 1.2 gpm washer.
Thanks for the video, nice info and like someone else said on another comment that no one talks about rinsing to prolong life, very good tip!!! In regards to the thick foam, some say the thicker the foam the longer it clings to the surface, so not sure if that is considered a waste bit a need to help break down more dirt. Again, awesome video!!!
I just recently got this MJJC. I got the Mr pink shampoo used 2 oz of it and rest water . Changed the orfice to the 1.1 . Used the dewalt electric pressure washer 2100 with 1.2 gpm. My foam wasn’t that thick any suggestions on how to make it thicker or could it be a foam cannon issue ?
Did you have the knob turned to the max foam setting? My pressure washer pumps out 1.3 gpm, i use 2 to 3 oz of any soap, and the foam it produces is super thick. Maybe send the company an email and see if they can assist
Very helpful thx. I just received this this morning can't wait to try it (using KochChemie GSF pH 7.5 snowfoam- Made In Germany) Greetings from Alicante, Spain. (Subscribed)
Thanks for the review, I also have a cheap foam cannon, looking to upgrade. Besides making thick vs thinner foam, I wonder which one actually cuts the dirt off better, That’s the actual goal. Anyone notice the cleaning difference?
There is no cleaning difference at all. Thick foam just sticks on the surface a bit longer and it’s more visually appealing. Other than that, from a purely functional standpoint, cheaper cannons will still be fine. I do like that this one holds more solution than my cheaper one though
Cleaning abilities depends on the the soap shampoo you use, not on a cannon. If you want more. Cleaning, a higher pH solution is better, but also strips wax on the paint.
@@TheCarDetailingChannel great demo and thanks for clarifying. I take it that when you concluded in the video with having "good foam" @16:55 you meant simply thicker rather than better performing foam (compared to the cheap aliexpress model) right?
What kind of water do you have in your milk jug? The more you sprayed with Honey Dew, the thinner it got cuz you had it angled it all just fell off lol
I just bought a 3200 power horse pressure washer but it can support this foam correct idk km need to this but what other things I need to use the foam cannon boss
@@TheCarDetailingChannel Initially I used the K2 Compact, now using AVA Smart P60 same problem with the adapter on both, I have an Autoglym cannon as well, no such issues with the adapter on that....I've had to buy the quick realese connector and get an adapter from autoglym, to resolve the problem
Aw I see. The some Karchers do have those annoying twist together adapters. Too bad because the foam cannon itself is probably the best I’ve ever seen when it comes to foaming ability
I’m extremely happy to be able to now provide my viewers with a discount to my favourite detailing store.
carzilla.ca/?ref=Tg5JZODH
Use discount code CARDETAILING5 at check out for 5% off.
Best review of this product I’ve seen so far. 👍
Awesome! Thanks for watching and commenting.
Thanks for the video - very clear. I have to say that new foam lances have had a lot of video coverage in the last couple of years, but your video is the first that suggests flushing through with clean water after use will prolong the life of your lance. Well done! Subbed.
Nice review and breakdown on the MJJC Pro.
Best video, best product.
I just purchased mines and going to be returning it. They increased the price and now don’t include the spare parts besides the 1.1 orifice.
They don’t send out any spare parts as the new 2.0 has new upgraded parts and filters. Seen this answered on Amazon by the seller
Very good review and comparison. I’ll have mine this week so a review will be posted soon after I take delivery.
Sweet! Did you end up trying it out yet?
they stop giving the free meshes by the way new batch doesn't come with them
What hapif you loose the trashy red caps? The falls out easily should we glue them in order to keep them in place?
I’m seriously can you tell me if that works
I just got mine in the mail today and I'm super excited to use it for the first time tomorrow. I changed my orifice out to the 1.1mm tho. Some other reviews have shown that to be the better size for smaller pressure washers. I have a craftsman 1700 psi 1.2 gpm washer.
I'm looking at that pressure washer and foam cannon how has the combination been? 🤔
Where can I get this foam cannon from?
@@lackcebay would be the best place to buy this
Looks amazing!
Mine comes tomorrow so you have to install the 1.1 orephus , or is it already on it.
Thanks for the video, nice info and like someone else said on another comment that no one talks about rinsing to prolong life, very good tip!!!
In regards to the thick foam, some say the thicker the foam the longer it clings to the surface, so not sure if that is considered a waste bit a need to help break down more dirt. Again, awesome video!!!
Watching a guy Speckles McSorran yesterday provided same advice so I guess it's a good idea.
Did you get more foam with the 1.1 mm orifice? I couldn't tell from the video and you didn't mention any difference.
What's the total amount the bottle can hold? Looks like a solid foaming gun though
Its 1000mL bottle which works out to around 33 Ounces.
What spray gun do you use for this test
It's interesting how the foam clings on longer on the protected side ( Right side). Wasn't expecting that. Can anyone explain this phenomena?
It's definitely odd. If i get some free time, I'm going to do some more testing to see if can come up with an explanation.
Great video
1 oz of soap to 500 ml of water is way less concentrated than the 1 to 10 ratio that I have seen recommended. Do you prefer a weaker dilution?
Just bought this. I didn't get any extra filters as shown here.
same here, I emailed them about it but waiting for response
I just recently got this MJJC. I got the Mr pink shampoo used 2 oz of it and rest water . Changed the orfice to the 1.1 . Used the dewalt electric pressure washer 2100 with 1.2 gpm. My foam wasn’t that thick any suggestions on how to make it thicker or could it be a foam cannon issue ?
Did you have the knob turned to the max foam setting? My pressure washer pumps out 1.3 gpm, i use 2 to 3 oz of any soap, and the foam it produces is super thick. Maybe send the company an email and see if they can assist
Very helpful thx. I just received this this morning can't wait to try it (using KochChemie GSF pH 7.5 snowfoam- Made In Germany) Greetings from Alicante, Spain. (Subscribed)
Thanks for the review, I also have a cheap foam cannon, looking to upgrade.
Besides making thick vs thinner foam, I wonder which one actually cuts the dirt off better, That’s the actual goal.
Anyone notice the cleaning difference?
There is no cleaning difference at all. Thick foam just sticks on the surface a bit longer and it’s more visually appealing. Other than that, from a purely functional standpoint, cheaper cannons will still be fine. I do like that this one holds more solution than my cheaper one though
Cleaning abilities depends on the the soap shampoo you use, not on a cannon. If you want more. Cleaning, a higher pH solution is better, but also strips wax on the paint.
@@AbidAli-bo8sv Agree 💯
@@TheCarDetailingChannel great demo and thanks for clarifying. I take it that when you concluded in the video with having "good foam" @16:55 you meant simply thicker rather than better performing foam (compared to the cheap aliexpress model) right?
What kind of water do you have in your milk jug? The more you sprayed with Honey Dew, the thinner it got cuz you had it angled it all just fell off lol
I think it was just regular tap water if remember correctly
I just bought a 3200 power horse pressure washer but it can support this foam correct idk km need to this but what other things I need to use the foam cannon boss
This might be a dumb question but why do you add warm water to the mix if the water coming from the hose is cold or ambient temp?
It helps to fully mix soap with water in the canister.
Where is the $59.00 USA price? Good demo, thank you
Great video! What gun and pressure washer did you use for this test?
It's in the title man.
@@brokenSnake I don’t see which pressure washer he used in the title man.
At what cost it's available in India.
Where can I buy it ?
Carzilla has them in stock. You can save 5% with code CARDETAILING5
carzilla.ca/products/mjjc-foam-cannon-pro-v2-0?ref=Tg5JZODH
This or the MTM 22.2?
I need foam that thick
It's not a bad Cannon, but their Karcher adapters are terrible, nightmare to fit to a Karcher style pressure washer, avoid it like the plague!
What kind of Karcher pressure washer are you using?
@@TheCarDetailingChannel Initially I used the K2 Compact, now using AVA Smart P60 same problem with the adapter on both, I have an Autoglym cannon as well, no such issues with the adapter on that....I've had to buy the quick realese connector and get an adapter from autoglym, to resolve the problem
Aw I see. The some Karchers do have those annoying twist together adapters. Too bad because the foam cannon itself is probably the best I’ve ever seen when it comes to foaming ability
59$, now they sell it for 89$
Why is my one different to this
Foam!!
Too much foam 😂
Way to much foam bud
Really want to put my Chemical Guys up against this one
Chemical Guys is no match for it. MJJC is the best cannon you can get, next is the Griots.