I used CanCoat Evo for the first time about one month ago. I absolutely love this coating. I have since applied it to a friends car and doing another friend’s car in a couple weeks. I have also purchased Bathe, Wet Coat, Ceramic Detailer and Restart Wash. I am a customer for life! Thanks for the great products and thank you for the great videos. Ciao.
I used Gyeon CanCoat on my rims, wasn't in the best shape so I had to polish it also. But protected it with CanCoat and they still beads since 6 months/6000kms. Gets clean quite easily, just some regular degreaser (not strong), then snow foam (a bit strong) and use detailbrush for extra power. During the CanCoat, the rim popped quite out with the color and shine, just love it. Tradiontal wax or other spray coats on rims lasts 2months maximum, while this still beads and shines like if it was detailed since day one. For the car I'm going to apply CanCoat on top of Gyeon One soon, for winter season. Will be intresting to see how it works out.
6 meses de duração MÍNIMA, tenho clientes que já apliquei a 9 meses e ainda tem bastante brilho, repelência e toque liso, porém sempre lavamos com produtos e técnicas corretas, este produto é um coringa e um excelente custo benefício
I don't have a garage and we have damp nights here. Will the water accumulation overnight affect the coating? And would putting a coat of your new wax over it be recommended to protect it while it cures? Thanks.
Damp nights are never good for a coating! In your case I would stick to Q2 Wax and reapply every 4 months. You really will love it. It’s fast, easy on and off and beads like crazy. Regards, Y.
@@GYEON_official good point 👍 I have Opti-Coat Pro+ on one of my cars and I would like to use CanCoat as a durable sacrificial layer, but I have two questions: 1) I know the car has to be decontaminated prior to being coated and has to be kept indoor after coating. But what will actually happen if there is some contamination or prior protection (like bathe+\WetCoat) left on the paint or if an emergency comes up and you have to drive the car through heavy rain right after coating. Is it just the durability that will be affected or can it cause damage ? 2) Will any missed high spots or accidental overspray cause permanent damage or will it just wear off within 6-12 months with the rest of the CanCoat layer ? I will be careful, but shit happens and I just want to be ready for worst case scenarios 😅
No permanent damage can be made with our paint coatings. To early or to quick in contact will make the coating less performing and the effect of permanent waterspotting will be higher. Regards, Y.
GREAT video! Can I use Gyeon ceramic retailer instead of cure after I’m done? How long do I have to wait to use the detailed after applying can coat? First wash after 14 days? Big thanks, ready to purchase👍
I bought can coat evo and will apply in a garage this weekend. Temp will be mid 70s and humidity in mid 70s, will these conditions be okay? Thank you!!
@@GYEON_official Coated my car with Can-coat yesterday and let it cure in a friends garage for 28 hours. Applied ceramic detailer and brought it home, looks fantastic!
Up to you but I wouldn’t put simething on my car that will boost gloss when there are still defects in the paint. It will accentuate them. A thorough decontamination is a must and I most cases claying is as well, so when you start claying then polishing is the next thing. Regards, Y.
A question if I may. I want to apply a ceramic coating to my car and I have to do this outdoors on my driveway as I do not have a garage. The weather is such at the moment that it is too hot and sunny to apply the coating during the mid morning to afternoon but is possible late PM. This means the coating would cure overnight. Great so far. However, here is the issue. We are having heavy dew fall during the night starting about 10pm and the dew does not clear until the next morning. It is so heavy it looks like it has been raining. If I were to apply the ceramic coating and then after an hour or so apply Gyeon Cure would this protect the ceramic coating whilst it cures but with dew on the top? . I have both Gyeon Pure Eco and Gyeon Cancoat (and Cure) awaiting application. Thanks in anticipation.
@@GYEON_official thank you so much for the prompt reply. That's all I needed to hear for applying this product. It's super easy to use and so cost effective if it does what it says it does. Just keep applying it every 6 months or when it starts fading.
Hi, Y. I applied Can Coat last August and it still performs well after a Chicago winter (with daily garage). It's spring time and I needed to decontaminate my paint from tar spots and general blemishes. I didn't think twice about using the Gyeon mild clay bar today but now I'm wondering if I must apply a Can Coat immediately. Will a clay bar remove the previous Can Coat? Thanks in advance.
Hi, great to hear. Claying (friction) will diminish it depending how aggressive you clay. I would check the performance after claying and a wash with Q²M Restart shampoo. If you are still happy with the result, don’t coat yet but maybe a good Q²M Cure application will be beneficial. Regards, Y.
@@GYEON_official thanks! I will pick up a bottle of the Cure. I'm already washing with the Bathe+ each time. In comparing Bathe+ and Restart, is one recommended for regular cleanings more than the other? I really appreciate the dialogue you have with us on these videos!
Can your can coat be used on a competing coating? Example onto on avalon king. I just discovered your product line from Miranda Detailing I wish I had applied gyeon product. But avalon is good I guess. Thanks
Yes you Can coat on top of most true Ceramic coatings. Of course in terms if performance starting from a clean “sheet” is always the ideal way to go but don’t be afraid to try. Regards, Y.
Hi Yves , was wondering if you can use a suede cloth as a secondary towel ( final wipe) too ? Since they use these to wipe down the stronger coatings I assume this should work ? I use bald wipe to apply and spread. Would it be possible to use a regular carnauba wax on top too after a couple of weeks ?
Hi, a secondary towel is not the final wipe if you ask me. But as your last towel a big suede is what I always have been teaching. A secure final wipe. After a couple of weeks a carnauba wax doesn’t make much sense. Rather do it after 12h before the car goes out. Gyeon Wax is absolutely no issue at all and performs fantastic. Regards, Y.
@@GYEON_official hi Yves, great ! That is kind of what I meant : a final wipe with a big suede cloth . Just picked up a new supply of Gyeon at oudenaarde Wax-it 👍🏻
@@GYEON_official Hi Yves, just a quick question about the Q2 Wax: the 12 hour rule also applies with the other Evo coatings (One, Pure, etc)? The manual says after 14 days or the first wash, but I thought I would ask for a second opinion because I see a lot of detailer stories reposted on Gyeon's Instagram where they apply it over the coating before hading over the car to the customer. Thanks!
All true ceramic coatings need a drying period and have a curing time. To prevent issues and have maximum performance it is advisable to keep the car dry the first 12h. That is a minimum, the longer, the better actually. But in warm climates with almost no rain it’s no problem to go out earlier. Regards, Y.
Non off the above. Gyeon compounds are my way to go when it comes polishing before a coating application. I would finish with Q²M Primer as your final stage. Cutting stage depends on the type of defects but Q²M Compound with a blue Gyeon polishing pad is a good start. Regards, Y.
I would suggest to use more then one. The large coating applicators will do the job faster and have an inside liner to prevent the product of soaking into the foam but 2 pieces for a normal car is a minimum. Regards, Y.
No, I would not do that at all. Coating will harden up in the fibres and the last thing you want is a hard applicator which might scratch your freshly polished paint. Regards, Y.
Hi Y. I have now bought the new CanCoat EVO. My plan is to give my car CanCoat. Then after 1 hour give it CanCoat again. Then leave the car in the garage for 12 hours, and give it Ceramic Detailer before I'll take it for a spin. I think Ceramic Detailer is easier to work with instead of the original advice of using Gyeon Cure. Is this a good plan?
Try not to wash it with strong chemicals in the first week. Depending your climate common sense is always good. After “sand rain”, rinse and if needed wash the car with out neutral shampoo Q2M Bathe and dry to avoid heavy waterspotting for example. Regards, Y.
I do not have facility of keeping my car undercover, can I use Cure after CanCoat Evo to overcome this? If so do I put Cure on straight after or do I have to wait? If this is possible I was planning on using Ceramic Detailer as a topper every other wash.
The first 24h and even the first 2 to 3 weeks are crucial for a coating and it’s performance. Wait a minimum of 2-4 hours to apply Q²M Cure on top of Q²CanCoat EVO. Q²M CeramicDetailer is a perfect choice as topper or drying aid. Regards, Y.
In general, microfiber used for regular coating should not be washed and re-used, and should be disposed. Is it the same for microfiber used with CanCoat please? Thanks.
Yes. Q²CanCoat EVO will harden up for sure which will make the towel not absorbing. It can be used for other tasks but I would never use is on paint anymore. Regards, Y.
LOL 9th from the Czech Republic and thumbs up for the GYEON products!. I am just a weekly warrior but I use many of the G products on my car. At one point, I had to stop buying products, so do not make more videos LOL
I have been searching for a coating that I can apply to my satin vinyl wrap and I’ve come across a lot of products. Can you help me with the correct one as it is all very overwhelming!
Hi, for your satin wrap I would suggest to use or Q²Matte Evo coating. This will give your wrap a richer colour without making it glossy. It’s an easy wipe on, wipe off application. Have a look here: th-cam.com/video/XMdOj-B3__0/w-d-xo.html Regards, Y.
@@GYEON_official so if you were to install CanCoat on the windshield but let it fully cure before using the wipers, would there still be a principa potential issue with smearing?
Yes and not only smearing but also wear because it degrades differently when friction is applied on glass then Q²View or Q²QuickView. It’s chemically a totally different product. Regards, Y.
For PPF on new car, for every day waterless /rinseless cleaning what to use? For washing weekly or bi weekly which shampoo to use for new PPF car? For daily Glass cleaning what to use ? For dashboard, for alloy wheel and ventilated leatherite weats which products to use?give products names and links. Reply as early as possible
Thank you for your concern. I do wear gloves most of the time but we are all human and my main concern while filming is the correct explanation and usage for our viewers, rather then my own safety but I will try to be more cautious in the future. Regards, Y.
Excellent vidéo again this morning! Thanks GYEON and Yves !
I used CanCoat Evo for the first time about one month ago. I absolutely love this coating. I have since applied it to a friends car and doing another friend’s car in a couple weeks. I have also purchased Bathe, Wet Coat, Ceramic Detailer and Restart Wash. I am a customer for life! Thanks for the great products and thank you for the great videos. Ciao.
Thank you for watching and giving us your feedback. Much appreciated and glad you like the products. Enjoy.
Ciao,
Y.
I love the CanCoat, very easy to apply
I used Gyeon CanCoat on my rims, wasn't in the best shape so I had to polish it also.
But protected it with CanCoat and they still beads since 6 months/6000kms. Gets clean quite easily, just some regular degreaser (not strong), then snow foam (a bit strong) and use detailbrush for extra power.
During the CanCoat, the rim popped quite out with the color and shine, just love it.
Tradiontal wax or other spray coats on rims lasts 2months maximum, while this still beads and shines like if it was detailed since day one.
For the car I'm going to apply CanCoat on top of Gyeon One soon, for winter season. Will be intresting to see how it works out.
Thank you for feedback. Glad you like it and great idea to put it on top of Q2 ONE. You will be surprised.
Regards,
Y.
Can the microfibre applicator be washed and re-used after using CanCoat? Or will it harden like ceramic coatings?
It will harden although you can wash them immediately after application and use them for other purposes, for example, wheel arches..
Regards,
Y.
Excelente. Um produto muito versátil. Qual a durabilidade média desse revestimento cerâmico? Obrigado
6 meses de duração MÍNIMA, tenho clientes que já apliquei a 9 meses e ainda tem bastante brilho, repelência e toque liso, porém sempre lavamos com produtos e técnicas corretas, este produto é um coringa e um excelente custo benefício
Great video absolutely enjoy using cancoat for its ease of use and durability.
Thanks!
Regards,
Y.
well presented Yves. those dual purpose applicator blocks are very handy.
Thanks. Glad you like them.
Regards,
Y.
I have a car outdoors with no place to put inside. Can I use this if it’s a cloudy day with no rain?
Stay tuned for some more Gyeon news very soon. You might like it 😉.
Regards,
Y.
I don't have a garage and we have damp nights here. Will the water accumulation overnight affect the coating? And would putting a coat of your new wax over it be recommended to protect it while it cures? Thanks.
Damp nights are never good for a coating! In your case I would stick to Q2 Wax and reapply every 4 months. You really will love it. It’s fast, easy on and off and beads like crazy.
Regards,
Y.
@@GYEON_official the problem with damp nights is only until the coating has cured, right ?
Yes it is. But curing of a coating can take 3 weeks depending climate and type of coating.
Regards,
Y.
@@GYEON_official good point 👍
I have Opti-Coat Pro+ on one of my cars and I would like to use CanCoat as a durable sacrificial layer, but I have two questions:
1) I know the car has to be decontaminated prior to being coated and has to be kept indoor after coating. But what will actually happen if there is some contamination or prior protection (like bathe+\WetCoat) left on the paint or if an emergency comes up and you have to drive the car through heavy rain right after coating.
Is it just the durability that will be affected or can it cause damage ?
2) Will any missed high spots or accidental overspray cause permanent damage or will it just wear off within 6-12 months with the rest of the CanCoat layer ?
I will be careful, but shit happens and I just want to be ready for worst case scenarios 😅
No permanent damage can be made with our paint coatings. To early or to quick in contact will make the coating less performing and the effect of permanent waterspotting will be higher.
Regards,
Y.
Thanls Yves !
GREAT video! Can I use Gyeon ceramic retailer instead of cure after I’m done? How long do I have to wait to use the detailed after applying can coat? First wash after 14 days? Big thanks, ready to purchase👍
Yes you can. At least wait till the next day to apply Q²M Cure or Q²M CeramicDetailer.
Regards,
Y.
I bought can coat evo and will apply in a garage this weekend. Temp will be mid 70s and humidity in mid 70s, will these conditions be okay? Thank you!!
Yes, nothing to worry about.
Regards,
Y.
@@GYEON_official Coated my car with Can-coat yesterday and let it cure in a friends garage for 28 hours. Applied ceramic detailer and brought it home, looks fantastic!
Do I have to polish the car before applying it?
Up to you but I wouldn’t put simething on my car that will boost gloss when there are still defects in the paint. It will accentuate them.
A thorough decontamination is a must and I most cases claying is as well, so when you start claying then polishing is the next thing.
Regards,
Y.
Wich topper for can coat for maintenence and durability ? ceramic quick detailer? Thanks #GYEON
CeramicDetailer is a great choice. If you want something special, put Q2 Wax on top. ✌🏻
Regards,
Y.
A question if I may. I want to apply a ceramic coating to my car and I have to do this outdoors on my driveway as I do not have a garage. The weather is such at the moment that it is too hot and sunny to apply the coating during the mid morning to afternoon but is possible late PM. This means the coating would cure overnight. Great so far. However, here is the issue. We are having heavy dew fall during the night starting about 10pm and the dew does not clear until the next morning. It is so heavy it looks like it has been raining. If I were to apply the ceramic coating and then after an hour or so apply Gyeon Cure would this protect the ceramic coating whilst it cures but with dew on the top? . I have both Gyeon Pure Eco and Gyeon Cancoat (and Cure) awaiting application. Thanks in anticipation.
Love Gyeon products and can coat is a super easy and quick product to use.
It is and for me a must have on every shelf.
Regards,
Y.
great versitale product, for all exteriors and some interior surfcaces COngrats Geyon
Great video. Is this product going to form a glass layer on top of the clear coat?
It’s a true ceramic coating that will bond and anchor in the pores of the clearcoat, what sometimes is called a glass layer.
Regards,
Y.
@@GYEON_official thank you so much for the prompt reply. That's all I needed to hear for applying this product. It's super easy to use and so cost effective if it does what it says it does. Just keep applying it every 6 months or when it starts fading.
Hi, Y.
I applied Can Coat last August and it still performs well after a Chicago winter (with daily garage). It's spring time and I needed to decontaminate my paint from tar spots and general blemishes. I didn't think twice about using the Gyeon mild clay bar today but now I'm wondering if I must apply a Can Coat immediately. Will a clay bar remove the previous Can Coat? Thanks in advance.
Hi, great to hear. Claying (friction) will diminish it depending how aggressive you clay. I would check the performance after claying and a wash with Q²M Restart shampoo. If you are still happy with the result, don’t coat yet but maybe a good Q²M Cure application will be beneficial.
Regards,
Y.
@@GYEON_official thanks! I will pick up a bottle of the Cure. I'm already washing with the Bathe+ each time. In comparing Bathe+ and Restart, is one recommended for regular cleanings more than the other?
I really appreciate the dialogue you have with us on these videos!
Once every 3 washes a thorough Q²M Restart wash is what I recommend.
Regards,
Y.
Can your can coat be used on a competing coating? Example onto on avalon king. I just discovered your product line from Miranda Detailing I wish I had applied gyeon product. But avalon is good I guess. Thanks
Yes you Can coat on top of most true Ceramic coatings. Of course in terms if performance starting from a clean “sheet” is always the ideal way to go but don’t be afraid to try.
Regards,
Y.
Hi Yves , was wondering if you can use a suede cloth as a secondary towel ( final wipe) too ? Since they use these to wipe down the stronger coatings I assume this should work ? I use bald wipe to apply and spread. Would it be possible to use a regular carnauba wax on top too after a couple of weeks ?
Hi, a secondary towel is not the final wipe if you ask me. But as your last towel a big suede is what I always have been teaching. A secure final wipe.
After a couple of weeks a carnauba wax doesn’t make much sense. Rather do it after 12h before the car goes out. Gyeon Wax is absolutely no issue at all and performs fantastic.
Regards,
Y.
@@GYEON_official hi Yves, great ! That is kind of what I meant : a final wipe with a big suede cloth . Just picked up a new supply of Gyeon at oudenaarde Wax-it 👍🏻
@@GYEON_official Hi Yves, just a quick question about the Q2 Wax: the 12 hour rule also applies with the other Evo coatings (One, Pure, etc)? The manual says after 14 days or the first wash, but I thought I would ask for a second opinion because I see a lot of detailer stories reposted on Gyeon's Instagram where they apply it over the coating before hading over the car to the customer. Thanks!
Do you have any ceramic coatings that you don’t have to leave your car inside for hours after application?
All true ceramic coatings need a drying period and have a curing time. To prevent issues and have maximum performance it is advisable to keep the car dry the first 12h. That is a minimum, the longer, the better actually. But in warm climates with almost no rain it’s no problem to go out earlier.
Regards,
Y.
What's your best ceramic coating for stealth PPF?
We have Q2 MATTE which will work great. Maintain it with Q2M PPF Maintain and it will look amazing.
Regards,
Y.
Can I use it on leather?
Greetings from Brazil.
No.
Regards,
Y.
Good morning Sir,
If I want my white paint to be super glossy, would you recommend Gyeon Pure Evo + top with CanCoat? Thank you.
Respectfully,
Robert
This combo will look bonkers for sure on white but remember that the polishing and prep stage is where the key lies.
Regards,
Y.
@@GYEON_official thank you
What polish do you recommend, sir? Sonax Perfect Finish or 3D?
Non off the above. Gyeon compounds are my way to go when it comes polishing before a coating application.
I would finish with Q²M Primer as your final stage. Cutting stage depends on the type of defects but Q²M Compound with a blue Gyeon polishing pad is a good start.
Regards,
Y.
@@GYEON_official thank you, sir
can we put on PPF film ?
Yes you can(coat) PPF. 😊
Regards,
Y.
How about matte PPF?
Im wondering is it safe using in in headlights back and forward?
Yes it is!
Regards,
Y.
can this be used on a PPF?
It can.
Regards,
Y.
Will one applicator be enough for the entire car or it will get sticky?
I would suggest to use more then one. The large coating applicators will do the job faster and have an inside liner to prevent the product of soaking into the foam but 2 pieces for a normal car is a minimum.
Regards,
Y.
@@GYEON_official Thanks!
Can i reuse these 2 applicators for another car if i wash them after the first car?
No, I would not do that at all. Coating will harden up in the fibres and the last thing you want is a hard applicator which might scratch your freshly polished paint.
Regards,
Y.
Hello, I have a question, after first application how many days should I wait before applying cure?
You can apply apply Q²M Cure the day after if you want.
Regards,
Y.
How would it react to matt paint? Looking to coat my matt motorcycle. Thanks!
It will add depth but no worries. Just make sure you have an even coverage.
Regards,
Y.
Hi Y. I have now bought the new CanCoat EVO. My plan is to give my car CanCoat. Then after 1 hour give it CanCoat again. Then leave the car in the garage for 12 hours, and give it Ceramic Detailer before I'll take it for a spin. I think Ceramic Detailer is easier to work with instead of the original advice of using Gyeon Cure. Is this a good plan?
Absolutely. You will be amazed by the end result. Take your time and use enough towels. Better be safe then sorry.
Regards,
Y.
@@GYEON_official Are the towels used with can coat to be thrown away when finished?
You can reuse them but I would strongly suggest NOT to do it on paint but use them for the dirty jobs, wheelarches, exhausts, etc.
Regards,
Y.
I love that Gyeon : )
How long do i wait to wash the vehicle after applying? 🦁
Try not to wash it with strong chemicals in the first week. Depending your climate common sense is always good. After “sand rain”, rinse and if needed wash the car with out neutral shampoo Q2M Bathe and dry to avoid heavy waterspotting for example.
Regards,
Y.
@@GYEON_official ok, thanks for the reply. Can i apply a second layer of cancoat 1 week on after washing?
Yes you can but there is no need to do that. I’d rather put a layer of Q2Wax over it after 24h.
Regards,
Y.
@@GYEON_official cheers, thanks for your help 👍🏻
I do not have facility of keeping my car undercover, can I use Cure after CanCoat Evo to overcome this? If so do I put Cure on straight after or do I have to wait?
If this is possible I was planning on using Ceramic Detailer as a topper every other wash.
The first 24h and even the first 2 to 3 weeks are crucial for a coating and it’s performance. Wait a minimum of 2-4 hours to apply Q²M Cure on top of Q²CanCoat EVO.
Q²M CeramicDetailer is a perfect choice as topper or drying aid.
Regards,
Y.
After 2 to 4 hours can ceramic detailer be used INSTEAD of Cure? Thx!! (I already have ceramic detailer)
If I only use can coat as a single coating, do I need to polish it off before reapplying it after 12+ months?
Not necessarily but a chemical decontamination is a must. It’s all about your expectations but technically it’s not a problem.
Regards,
Y.
In general, microfiber used for regular coating should not be washed and re-used, and should be disposed. Is it the same for microfiber used with CanCoat please? Thanks.
Yes. Q²CanCoat EVO will harden up for sure which will make the towel not absorbing. It can be used for other tasks but I would never use is on paint anymore.
Regards,
Y.
@@GYEON_official Thank you for the info. I learn a lot from your videos for my DIY projects. Keep up with the great content.
LOL 9th from the Czech Republic and thumbs up for the GYEON products!. I am just a weekly warrior but I use many of the G products on my car. At one point, I had to stop buying products, so do not make more videos LOL
Start saving, more are on the way 😉.
Regards,
Y.
I have been searching for a coating that I can apply to my satin vinyl wrap and I’ve come across a lot of products. Can you help me with the correct one as it is all very overwhelming!
Hi, for your satin wrap I would suggest to use or Q²Matte Evo coating. This will give your wrap a richer colour without making it glossy. It’s an easy wipe on, wipe off application.
Have a look here:
th-cam.com/video/XMdOj-B3__0/w-d-xo.html
Regards,
Y.
Can be use matte cars?
You can but we have a coating that is specially formulated for matte paint and wraps, maybe worth a look.
Regards,
Y.
Why would CanCoat be smeary on the windshield, but not on the other glass?
Because on the side glass you don’t have wipers that can smear it out.
Regards,
Y.
@@GYEON_official so if you were to install CanCoat on the windshield but let it fully cure before using the wipers, would there still be a principa potential issue with smearing?
Yes and not only smearing but also wear because it degrades differently when friction is applied on glass then Q²View or Q²QuickView. It’s chemically a totally different product.
Regards,
Y.
@@GYEON_official got it, ok thank you
Is CanCoat or Q2 Mohs Evo better for wheels?
Q²Mohs EVO is spectacular but it’s all about options vs expectations and what you are willing to pay.
Regards,
Y.
Yves make sure you use gloves, great demo as always.
Thanks
You don't need gloves or mouth protection for this one? I almost passed out from the vapours so had to put a respirator on
For PPF on new car, for every day waterless /rinseless cleaning what to use? For washing weekly or bi weekly which shampoo to use for new PPF car? For daily Glass cleaning what to use ? For dashboard, for alloy wheel and ventilated leatherite weats which products to use?give products names and links. Reply as early as possible
AMAZING
Leave the car inside for 12 hours? One of the selling points of this product is "No garage? No problem!".
smooth video
awesome!
Cancoat must be the best product in the market for detailers!
I can’t agree more!
Regards,
Y.
You Best !!!
💪🏼💪🏼👏👏
👍
Nice. But I would wear gloves.
Thank you for your concern. I do wear gloves most of the time but we are all human and my main concern while filming is the correct explanation and usage for our viewers, rather then my own safety but I will try to be more cautious in the future.
Regards,
Y.
2nd