Hey Donny, One of these saws you were working on is mine. It's back home now, what a terrific job you did putting a new heart in an old saw. It truly runs better than new with your magic touch, a completely different tool. Many thanks. Got another little one coming up. Peace.
A good number of years back a friend gifted me a winterized 357XPG, that came through your shop. This thing is a beast! I run it with a 16" bar, and it stops for nothing. Great shop & channel!
I happen to live 20 minutes from the Greatest Spectacle in Racing...The Indy 500! The month of May has always been all racing here and so many of the drivers got their start on Karts. Have ya ever been down to see the race? Thanks for the videos and info!👍
@@donnywalker4691 If you ever want to get a ticket and go some time. You are welcome to stay here and I can give ya the grand tour of the city/facility There has unfortunately been alot of lives effected and changed from Racers need for speed.😕 Have a great day!
Donny I have a jonsered 2166, do you have any opinions on the oem 51mm big bore kit along with a good woods port for an all around work saw for medium to large timber, I also have a 2165, I would like to put a big bore kit on, but I'm skeptical of the aftermarket big bore kits quality and overall reliability, do you have any experience with the Bailey big bore kit, who makes them and in general your thoughts and opinions thanks again for the awesome videos
Hello from Ohio! When you are ordering oem 372 non xt cylinders and piston do you prefer the single ring or the newer double rings pistons. Thanks I’m advance! Was getting ready to order a 372 top end for a 365 non x torq.
Donny do you have any idea what it would cost to send a powerhead up to you off of one of my 372's? A couple of years ago I made that oval shaped plaque hanging in Buckin's shop next to the woodstove in the bunker, and I almost crapped myself when they told me what it was going to cost me to send that sign up to him. If I remember right is was close to $50.00 for that wooden plaque that couldn't have weighed more than about 3 pounds. Just trying figure out what it would cost to send a power head up there to you? Jim Baker City, Oregon
Hey Donny I’ve picked up a 272 and the piston ring is stuck on the piston, I’ve tried soaking it in oil, heating it and no success. It’s in really good shape and don’t want to break it any ideas would be appreciate
@@jamiedalluge9472 Well I haven't gone much further into than removing the air filter cover , however It did start spitting gas out the muffler so if you happen to know what the part no. Of the carb is or which repair kit I would need for it I would be ever so grateful for that tidbit of info , it's a 2013 cs2172 that my uncle bought and never used it was given to me after he passed last Xmas and it was running like a champ til yesterday when I tried to pull it over It flooded out like crazy and started passing fuel out the exhaust and decomp valve
@@jamiedalluge9472 my uncle also left to us a 372 (I'm not sure if it's xtorq or not I think it a 2009 ) as well as 357 362 390 395 3120 and a cs2188 that was also brand new never used so luckily I do have other saws to use while this gets figured out , unfortunately this 2172 is my biggest saw that I own until my 562 or my 7310 arrive (thank you covid shipping)
Hey Donny, One of these saws you were working on is mine. It's back home now, what a terrific job you did putting a new heart in an old saw. It truly runs better than new with your magic touch, a completely different tool. Many thanks. Got another little one coming up. Peace.
Donny, Bless you for sharing your wisdom with us. Have an amazing day, stay safe!!!
I miss the home of the "Dirt Cup". There was something about waiting in line to turn left on the highway after a race. Paved tracks are not the same.
Nice work Donny! The master!
Nice work Donny, that cylinder looked amazing inside all cleaned up, would love to see want you could do to my 362.
I'm so glad you started this your channel
A good number of years back a friend gifted me a winterized 357XPG, that came through your shop. This thing is a beast! I run it with a 16" bar, and it stops for nothing. Great shop & channel!
Your workshop is like a dentists for chainsaws ,great videos
Haven’t watched yet but I’ll go ahead and give ‘er a thumbs up because I know it’ll be good. 👍🏻
Hi Donny, am I right in saying Husqvarna use SKF 6202/C3 bearings in the older 372 xps?
Bobby you rock bud!!! Love your content....keep it coming
woot! love a Donny walker vid. it's right up there with a bjarne butler vid. no joke
Yep, Bjarne, Donny and Rich, the first places to check every morning
Love the videos, do yall get many Makitas around there? How do the new 7900s compare to a 572 or 462?
Wondering the same
I think there a good saw should be right up there
They run right with a 462 or a 572.
And you won't need to bring them to the dealer to have the computer work done.
I happen to live 20 minutes from the Greatest Spectacle in Racing...The Indy 500! The month of May has always been all racing here and so many of the drivers got their start on Karts. Have ya ever been down to see the race? Thanks for the videos and info!👍
I haven’t been one year I hope I used to race karts with Paul Tracey and my friend Greg Moore rest his soul
@@donnywalker4691 If you ever want to get a ticket and go some time. You are welcome to stay here and I can give ya the grand tour of the city/facility There has unfortunately been alot of lives effected and changed from Racers need for speed.😕
Have a great day!
@@waynetharp that’s awesome might take you up on that one day
@@donnywalker4691 👍👍🏁🏁
Donny I have a jonsered 2166, do you have any opinions on the oem 51mm big bore kit along with a good woods port for an all around work saw for medium to large timber, I also have a 2165, I would like to put a big bore kit on, but I'm skeptical of the aftermarket big bore kits quality and overall reliability, do you have any experience with the Bailey big bore kit, who makes them and in general your thoughts and opinions thanks again for the awesome videos
I just did one of those 372 cylinders for a 2165 then they go good
@@donnywalker4691 Sure do!!
What's the price to have you do you work on a 372
Is the mask for ALU particles or fumes Donny
Hello from Ohio! When you are ordering oem 372 non xt cylinders and piston do you prefer the single ring or the newer double rings pistons. Thanks I’m advance! Was getting ready to order a 372 top end for a 365 non x torq.
We have the oem 2 ring ones in stock always
@@donnywalker4691 Many thanks!
Donny do you have any idea what it would cost to send a powerhead up to you off of one of my 372's? A couple of years ago I made that oval shaped plaque hanging in Buckin's shop next to the woodstove in the bunker, and I almost crapped myself when they told me what it was going to cost me to send that sign up to him. If I remember right is was close to $50.00 for that wooden plaque that couldn't have weighed more than about 3 pounds. Just trying figure out what it would cost to send a power head up there to you?
Jim
Baker City, Oregon
What about a windowed Piston in a 372?
Wouldn‘t that give more Flow ?
268 with a pop up cut into the top runs well in a 372 oe.
I have videos of a 2171 I built on my channel.
I'll be sending you my 372xp as soon as I find a legal/affordable way to ship it to Canada.
Mmmmmm Starbucks go juice🤤
Before he says it, I'm guessing Rush...
👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Hey Donny I’ve picked up a 272 and the piston ring is stuck on the piston, I’ve tried soaking it in oil, heating it and no success. It’s in really good shape and don’t want to break it any ideas would be appreciate
Man you have done what I would do is the top of piston damaged pushing on ring
@@donnywalker4691 I got it! Not damaged at all just stuck from sitting. Barn find gone good, now it’s time to get it back together. Thanks man
Dolmars 7900 porting
now Don go XL 12 AO cutting well have a look now that a hot saw lol
Dolmar 7900 brisco
So is there a way to walkerize a jonsered 2172 ?
@Matthew Kerhin that's what I thought the only difference I've seen between the two was the air filter and intake and the color on the outside
Xtorq has a completely diff top end and carb then the originals
2171 is same as 371/2xp non xtorq
@@jamiedalluge9472 Well I haven't gone much further into than removing the air filter cover , however It did start spitting gas out the muffler so if you happen to know what the part no. Of the carb is or which repair kit I would need for it I would be ever so grateful for that tidbit of info , it's a 2013 cs2172 that my uncle bought and never used it was given to me after he passed last Xmas and it was running like a champ til yesterday when I tried to pull it over It flooded out like crazy and started passing fuel out the exhaust and decomp valve
@@jamiedalluge9472 my uncle also left to us a 372 (I'm not sure if it's xtorq or not I think it a 2009 ) as well as 357 362 390 395 3120 and a cs2188 that was also brand new never used so luckily I do have other saws to use while this gets figured out , unfortunately this 2172 is my biggest saw that I own until my 562 or my 7310 arrive (thank you covid shipping)
To bad Cassidy is gone. The Skagit guys used to go up there. Do you ever go to Skagit?
Ya Ya,Ya, But what are your Timing Numbers, for the 372