CONVERTIBLE VALVE SYSTEM™: How to Convert your BBQ to Natural Gas
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- If you have a barbecue with the Convertible Valve System™, watch this video to see how quickly and easily you can convert from Propane to Natural Gas! To check whether your barbecue has the Convertible Valve System™ look for the logo on the top left corner of the control panel. The Convertible Valve System™ Conversion Kit can be purchased at Canadian Tire - #85-2261.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.6 (1/4)](http://i.ytimg.com/vi/m05kZ2GDKXg/mqdefault.jpg)
So I lost those nozzles and I need to change it back to propane cause I moved, can't seem to find new ones anywhere. Any ideas?
For the Master Chef Grill Turismo; is there supposed to be a Switch Screw on the Booster burner? I can't find one on my BBQ.
Frenchy032768 what is the answer?
There is a switch screw underneath of the control cap. Similar to the other burners.
Aren’t you supposed to install now orifices?
Thanks Just bought this BBQ want to use summer NG Winter LP
Strange question but why do you wish to switch between the 2 fuel sources?
my coleman revolution wont light ignition switch is working and gas is coming in only way i can light if i blowthe gas down to the egnition spark
Will this work on a Monument 14633 Grill two burner?
Thank you. Helped me a lot!
Wait you dont need to add the office for NG
Propane Gas is at a higher pressure than Natural Gas. The orifice helps regulates the flow of propane so it doesn't blow apart your BBQ. When removed it allows the lower pressure Natural Gas to flow correctly.
@@kylegibbard yes but swaping to larger orface instead of removing entirely. Wouldn't un restricted gas also now shoot into burner as well the venturi effect i believe
@convertible valve system
can you address this point? while there aren’t NG orifices included in the pack (and no mention of them when reassembling burners) it would be nice to have it explicitly stated that they are no longer needed
I think the reason you look for the 'Convertible Valve System' logo is so you know you don't have to replace the orifices, just remove them. If your grill does not have that logo, you will have to put new natural gas orifices where the propane ones were.
My regulator is stuck and won’t come off
I am trying to convert a gyro or shawarma grill, do you have videos for that thanks
You would need to check with the manufacturer of your grill to see if it is convertible. The design is vastly different when converting.
No teflon tape on threads!?
Never Teflon tape on gas appliances. Only pipe dope.
Also, on flare connections it's not needed but I would recommend putting some dope on the threads in order to make it tighter and also lubricate the threads so it won't seize when you want to remove it.
What first, dope or lubricant?
Dope is acting as a lubricant @@MatthewLine
@@harryschrysan3183 that makes more sense, thanks!
How do I get it back to propane?
Watch the video in reverse.
@@NFNNLN legit what I was going to say