@@keyn9r still awaiting!!!! 😂😅😅 great footage but we all youtubers need some more vids of this thing! The escalations outside videos, more interior videos, everything u got of this car!! 🥲
Exactly what i said the 9700rpm’s are Great indeed! Head packages on b16’s handle up to 10k rpm’s np its what i like about these b16’s! Just like spoon sports had 10k high revving b16’s in their ek’s!
Nice pull perfect cams for a B16 all motor build those cams are awesome but would quit at 8500 to 9000 maybe more depending on intake and exhaust on a 1.8 or bigger
I have ctr pistons stock rods with arp rod bolts skunk2 dual valve springs retainers skunk2 tuner2 camshaft type r intake with 70mm throttle body 1320 headers stock valves?
hello, I have a similar project in which I use ctr pistons in a dome but the engine does not start, will it be necessary to update the fuel injectors? am i using the b16a2 head with stock injectors? can you help me? thank you very much
2 ปีที่แล้ว
Is this on stock bottom end? Except the pistons and rings?
hello my friend your car is very nice. I also have an ek4 vti I have done all the reconstruction with 12.6 compression turner 2 camshafts and much more and it took me 200hp by force how many horses are there ??
to let you know the car has forged pistons from wisseco forged connecting rods eagle springs retainer skunk2 valves ferrea camshaft gears skunk 2 pro wears an aem gas pump and a full exhaust with octopus 4-1
Not really sure, bought this tranny and the seller doesn't knew it. It's an S80 with i guess a 4.9FD and 4/5th Y21. But it seems a little bit too short, i will switch back stock Y21, because my 3rd gear synchroring got fucked freshly after rebuild...
Hey man, sick build. Quick question: Any issues with the cams so far? I‘ve heard skunk cams breaking every now and then…is that true? I will have a fully built b18c with either skunk or toda cams. Thanks a lot! :
hey i think it's a story from the early or mid 2000's with these skunk2 cams. my cams looked fined after engine rebuilding with 6000 km and heavy track use and many +9k revs and german autobahn pulls lol
Long live b series!
B is for bullshit and K is for kill.
All motor b16 never disappoint
What a tune! Man your car sounds literally perfect🏁🏴☠️
THIS IS SPOON MODIFIED ?
Motor sounds healthy AF
Nice pulls bro!! We definitely need some outside vids launches and fly bys of this!!
Agreed, I want to do basically the same mods but to a lsvtec
@@SnackyPaper nice bro! Ls vtec r nice setups! My brother had an ls vtec civic coupe!! Great setup!!
Yes i will try to do my best lol
@@keyn9r still awaiting!!!! 😂😅😅 great footage but we all youtubers need some more vids of this thing! The escalations outside videos, more interior videos, everything u got of this car!! 🥲
This b16a is fast semi bulit and it moves and not yours uwkcal
Awesome to see a fast all motor B16!! 💯
Bro he didn't even hit 200 km/h
@@zackboris3191 still must be fun to drive
@@zackboris3191u sound like a hater and like ur big mad lol
Holy shit those revs man. Well done
im surprised it revs so high sounds good
Exactly what i said the 9700rpm’s are Great indeed! Head packages on b16’s handle up to 10k rpm’s np its what i like about these b16’s! Just like spoon sports had 10k high revving b16’s in their ek’s!
I need this set up. Been doing 8500 shifts in my b20 with a b16 head. I love the 9700 shifts wow!!!
stock bottom end?
Nice pull perfect cams for a B16 all motor build those cams are awesome but would quit at 8500 to 9000 maybe more depending on intake and exhaust on a 1.8 or bigger
VTEC KICKED IN YO !
Lovely sound!
I love that sound out of that b16’s mine only did 170whp for some reason
Maybe is it because I have an LS transmission I barely found out
@@mr.cobra5092 u probably were mostly stock
I have ctr pistons stock rods with arp rod bolts skunk2 dual valve springs retainers skunk2 tuner2 camshaft type r intake with 70mm throttle body 1320 headers stock valves?
Only? Don't expect much more. You're lucky you even got 170whp.
@@danielfuentes5428 stock b16. With bolt ons and tune makes 155.
şu sesi o kadar seviyorum ki gercekte dinlemek istiyorum
davon bekomme ich nie niemals genug !!! hammer auto!!
su sese hastayim be. gercekten her modifiyecinin istedigi ses motor bu
i just know that thing is a blast to drive!
9700rpm❌
10200rpm✅
Almost full circle
Awesome mate ❤
Ooh wee, that looks like 10.5k on the dash. Nice rip!
That was definitely over 10k 😂
insane
Damn son!
amazing men :o
Bro that 11000 RPM 🤣🤣😂👍🏾👍🏾🔥🔥nice mn
Bad ass dude!
Pervers geil.
Nice setup :D
More than 10k
How much hp?
More like 10,200
No the rpm gauge shows a bit to much at these high RPMs. In ECU it's 9700.
hello, I have a similar project in which I use ctr pistons in a dome but the engine does not start, will it be necessary to update the fuel injectors? am i using the b16a2 head with stock injectors? can you help me? thank you very much
Is this on stock bottom end? Except the pistons and rings?
Sounds amazing ! What injectors you are running ? Fuel pump? Actually I have this setup but there are something that failed
RDX Injectors with stock fuel pump
@@keyn9r stock fuel pump at 3 bar or 4 bar? (43 psi - 58 psi) thanks dude
Holy fuck!
Then first three gears sure look like 10,000 to me
119 super like
Sweet sound motor. What octane did you use for 12.3 to 1 compression?
102 octane in germany, should be 94 in US
@@keyn9r hi, sorry for the question, can your car with that compression use 95 or 98 octane from germany without detonation?
@@keyn9r Many thanks.
@@bloodya2h773 yo bro i'm too afraid to even try it hehe
Is this a b16a2 with ctr pistons?
Yes Nippon CTR Pistons
That looks more than 10k rpm
did u degree the cams?
hello my friend your car is very nice. I also have an ek4 vti I have done all the reconstruction with 12.6 compression turner 2 camshafts and much more and it took me 200hp by force how many horses are there ??
don't know, maybe it's restricted by your intake manifold or exhaust? My old engine with ITR Cams got 210hp, with this setup i hope i can reach 220hp!
to let you know the car has forged pistons from wisseco forged connecting rods eagle springs retainer skunk2 valves ferrea camshaft gears skunk 2 pro wears an aem gas pump and a full exhaust with octopus 4-1
when I say octopus I mean the exhaust manifold. to complete that I have input and butterfly from integra and a simota filter
Are the cams degreed? Gotta love the Bseries! 👌🏾
Not degreed, i will go on dyno this year
@@keyn9r wow! CTR pistons with some drop in Tuner 2s. 💪🏽
Nah you went past 9700, like 10k
homie shifting at -1100 rpm’s
nice, what gearbox and finaldrive? hope to get mine back from the spraypaint and film some pulls myself aswell. I also have a built NA b16a2
Not really sure, bought this tranny and the seller doesn't knew it. It's an S80 with i guess a 4.9FD and 4/5th Y21. But it seems a little bit too short, i will switch back stock Y21, because my 3rd gear synchroring got fucked freshly after rebuild...
That’s closer to 10,200
oh MY GAWD how much hp did you managed to squeeze out of this thing?
217hp, had more potential with cam gear tuning
@@keyn9r b16a can exceed 200hp?!!!😱
Hey man, sick build. Quick question: Any issues with the cams so far? I‘ve heard skunk cams breaking every now and then…is that true? I will have a fully built b18c with either skunk or toda cams.
Thanks a lot! :
hey i think it's a story from the early or mid 2000's with these skunk2 cams. my cams looked fined after engine rebuilding with 6000 km and heavy track use and many +9k revs and german autobahn pulls lol
How come it needed a rebuild?
@@0222tomibad ring gap
Skunk2 pro stage 3🙏🙏🙏
I think it's 10300rpm wow
Can you pass smog?
What the tires have you
Advan AD08RS 205/50/R15
Там походу все 10тысяч
What number spiring and retainer
Skunk2 Alpha Springs and ITR Retainers
@@keyn9r brotha whats the build on this ? Stock block ?
More 10500
The tach must be off because it was over 10
Yes it's off about 3-400rpm @ high rpms
More like 10,500
yea gey skunk was ebay brand bakc then so keep trying to make youe 2 liter honda fast
That is absolutely not 9700 rpm, more like 10700rpm
All that revving and going nowhere
all that Liters for 200hp (trans am 6.6L LOL)
Ads on this. Rlly.