Great content. I hope your channel grows so you can get a new camera!!! Great explanations and super informative through out the whole installation. Gained my subscription
I did torque those down. I ended up putting the car on ramps (so that the suspension had the full weight of the car on it) and made sure they were tight.
Hi, very informative video, really enjoyed it! I've got a set of these myself as well, my problem is (referring to 19:00) the elliptical nut that came with mine and I'm sure it is the same as yours, I was test-fitting it to see if the nut screws all the way down by hand it but it doesn't go all the way in. Just wondering if it is meant to be like that? And when you are tightening it down with the wrench, I assume you have to use a bit of force to get past the point that it doesn't go further by hand? Just wanna make sure that I'm not going to strip the nut if I had to use a bit of force.
Yeah those nuts are designed that way on purpose so they don't rattle loose. Just get them started by hand and keep going. It will feel like you're messing up the threads, but it's just the nature of the lock nuts. Good luck!!
This is awesome! Endlink locknut was driving me crazy! Saved me some time!
Glad it helped!
Actually super detailed video, loved it thanks bro!
Absolutely, thanks for watching!
Great content. I hope your channel grows so you can get a new camera!!! Great explanations and super informative through out the whole installation. Gained my subscription
I appreciate that!!
Gang shitttt!
Hey mate awesome video quick question did you tighten the end links once the car was on the floor? I’m not to sure if it’s necessary or not
I did torque those down. I ended up putting the car on ramps (so that the suspension had the full weight of the car on it) and made sure they were tight.
Any plans to paint the bar and supports? Despite being painted silver, I've seen them rust. Could these pieces use another coat of paint?
I live in Arizona so rust is not an issue. I'd say go for it if you think it would be a problem where you live
Hi, very informative video, really enjoyed it! I've got a set of these myself as well, my problem is (referring to 19:00) the elliptical nut that came with mine and I'm sure it is the same as yours, I was test-fitting it to see if the nut screws all the way down by hand it but it doesn't go all the way in. Just wondering if it is meant to be like that? And when you are tightening it down with the wrench, I assume you have to use a bit of force to get past the point that it doesn't go further by hand? Just wanna make sure that I'm not going to strip the nut if I had to use a bit of force.
Yeah those nuts are designed that way on purpose so they don't rattle loose. Just get them started by hand and keep going. It will feel like you're messing up the threads, but it's just the nature of the lock nuts. Good luck!!
@@ozzysgarage Ahhh I see. Well thanks mate, and yeh will definitely need it!
How are you liking them so far? I just ordered some for my 11 WRX
I wish I did them sooner to be honest, car handles so much better in the twisties
@@ozzysgarage excellent, I’m looking forward to it.
@@bongocars9518 You'll love them, good luck!