Why do these head units have to Jut out? And the left-hand side-bar makes the entire thing look so asymmetrical. Looks sooooo aftermarket. Not very seamless.
Not for everyone! I like the fact that it comes out like that. Makes it easier to reach it and see it. It may have to do with all the components in the back. I honestly don't mind the look personally but to each their own
Thanks man! Appreciate the constructive criticism. Definitely should have. Setting up the control function is done in settings. Happy to help anyone navigate if they have questions.
@@wrxstidima4287 I was watching another TH-camr installing a JVC floating head unit on his WRX STI. However, it seem a bit complicating requiring additional kits, some wire splicing and soldering. Your install looked easier and much just plug and play.
There is one plug that goes to the reverse camera that fits in two different places because it requires same amount of pins. You probably have it plugged in the wrong one try to plug it in the other one and it should fix the issue. My apologies for the delay haven't been paying attention to this channel lately
Forgive me but i skimmed through the video to see the end result, but im curious if your proclips center phone mount you had in an earlier video fits with the new headunit. I also have one and they are fantastic, but im hesitant to consider this headunit just because i love that mount so much and it fits perfect. It looks like it could maybe fit but if it does it would be tight. Thanks and good vid.
Thanks for checking out the video! Unfortunately it does not work either the headunit since the top vent piece is no longer a seperate piece so it has no where to clip in. Hope that helps!
Hey bro I am having issue installing mine. I'm not able to get sound to the front speakers and when I make calls I can't hear anything but the mic works. Would you be able to help? I have one connector on the headunit that doesn't seem to have a connection from the car but everything else is working. Thank u for ur time
Hey man I'm sorry man but I'm not sure what the issue is. I recommend checking all your connection and if you continue to have issues reach out to idoing
Hey man I'm sorry for the delay in getting back to you. I would check all your connections if you continue to have issues reach out to idoing on Instagram they helped me.
I just received my headunit but it did not include the harness/canbus all the wires seemed to need me to connect it manually. Did the canbus include the wiring pre done?
Hey Anthony! The Canbus decoder is only needed if you have a Harmon kardon system and you have to purchase it separately. Yes the Canbus decoder is plug and play!
Hmm that is a good question my 16 has it on the headunit not the top little screen. I'd reach out to Idoing directly with that question! Sorry I wasn't able to assist!
I've installed this recently. When I assigned the control wheel button for voice control.it uses Google chrome search instead of Google assistant voice . Do you have the same issue?
Yes! It was tough and required alot of energy to press in. I recommend pressing down on the whole top part of the headunit but make sure your applying force all the way across the headunit so you don't damage anything
@@wrxstidima4287 Where is the installation step in the video!? or how did U add H/K module? check other installation or mounting videos on youtube from good channels .... then you will know
@Raymen Dinkha yeah you are right man! I take back what I said definitely not the best video. I appreciate the feedback man. I'll try to do better with my next videos moving forward
👏 good job
Thank you!
Thank you!
I am forver going to call it the 'Glove Department' moving forward lol.
glove department? What part of that makes no sense when you say it?
Haha your right man! I done goofed but I'm human and far from an expert behind the camera. Appreciate the feedback! I'll try to do better next video
Would of been nice to see where all of those component cables plug into
Yeah sorry man it was just tough to record myself and get a good shot
Great video just ordered mine 👍
Just FYI "glove compartment" lol
Lmfao you made me look back what I said. I'm not that good on camera 🤣
Glove department 🤣🤣
The head unit looks awesome!
Thanks Max! I love it man
Do you know how to get rid of the hissing sound every time I turn the car on and drive there a sound that just in the background ?
Hmm I've never heard of this man I recommend reaching out to idling for advice
Why do these head units have to Jut out? And the left-hand side-bar makes the entire thing look so asymmetrical. Looks sooooo aftermarket. Not very seamless.
Not for everyone! I like the fact that it comes out like that. Makes it easier to reach it and see it. It may have to do with all the components in the back. I honestly don't mind the look personally but to each their own
Nice install. However, you should have shown steering wheel control functions so folks can see how it integrates with the new head unit.
Thanks man! Appreciate the constructive criticism. Definitely should have. Setting up the control function is done in settings. Happy to help anyone navigate if they have questions.
@@wrxstidima4287 I was watching another TH-camr installing a JVC floating head unit on his WRX STI. However, it seem a bit complicating requiring additional kits, some wire splicing and soldering. Your install looked easier and much just plug and play.
@@joea1746 thanks man! Appreciate that!
How did you fix your reverse camera issue? I can't get mine to work and would love to see your process to fix it.
Same here.
There is one plug that goes to the reverse camera that fits in two different places because it requires same amount of pins. You probably have it plugged in the wrong one try to plug it in the other one and it should fix the issue. My apologies for the delay haven't been paying attention to this channel lately
U fix the camera? Mine says no signal
Nice car bro I need one of those head United
Thanks man! Appreciate it! Definitely recommend it!
15 sti limited with HK Audio, have heard certain head units are very finicky with the HK, does this one work alright?
I heard it works from some folks with 15 sti but id reach out to idling just to be safe
It’s called a glove box and glove department
Would it be safe to say your music (via Bluetooth) sounds nicer (clearer, bass, crisp, connection stability, etc?) thx in advance!
Most definitely! Sounds significantly better!
Looks awesome bro
Thanks Mike! Appreciate that!
Forgive me but i skimmed through the video to see the end result, but im curious if your proclips center phone mount you had in an earlier video fits with the new headunit. I also have one and they are fantastic, but im hesitant to consider this headunit just because i love that mount so much and it fits perfect. It looks like it could maybe fit but if it does it would be tight. Thanks and good vid.
Thanks for checking out the video! Unfortunately it does not work either the headunit since the top vent piece is no longer a seperate piece so it has no where to clip in. Hope that helps!
Hey bro I am having issue installing mine. I'm not able to get sound to the front speakers and when I make calls I can't hear anything but the mic works. Would you be able to help? I have one connector on the headunit that doesn't seem to have a connection from the car but everything else is working. Thank u for ur time
Hey man I'm sorry man but I'm not sure what the issue is. I recommend checking all your connection and if you continue to have issues reach out to idoing
Hey man I'm sorry for the delay in getting back to you. I would check all your connections if you continue to have issues reach out to idoing on Instagram they helped me.
Hey nice vid. i have the same head unit , is changing the theme is an option ?
I know you can change the wallpaper but not sure of the theme man
I want this 🤔
So worth it! 😁
Is the Sti wallpaper custom?
Nope! I just downloaded it from Google images using my headunits edge explorer
@@wrxstidima4287 can you do a step by step
How did you get in touch with idoing?
Via instagram!
I just received my headunit but it did not include the harness/canbus all the wires seemed to need me to connect it manually. Did the canbus include the wiring pre done?
Hey Anthony! The Canbus decoder is only needed if you have a Harmon kardon system and you have to purchase it separately. Yes the Canbus decoder is plug and play!
Hey bro my 2015 sti limited has the camera on the top little screen will this change it to the big screen now?
Hmm that is a good question my 16 has it on the headunit not the top little screen. I'd reach out to Idoing directly with that question! Sorry I wasn't able to assist!
hey man im having the same problem did you find a solution?
@@Adrian-vh9if nope some people said it changes and some people said it doesnt lol guess we wont find out i would assume it stays in the small screen?
This head unit will not work with the 2019 STi with HK system... (even with the HK Harness) makes me sad.
ah dang really? i was almost gonna buy this :(
@@driftinsti yeah... makes me sad
Dang man sorry to hear. It use to not work with mine neither. Hopefully I doing makes a harness eventually.
I've installed this recently. When I assigned the control wheel button for voice control.it uses Google chrome search instead of Google assistant voice . Do you have the same issue?
Hmm no I've never had this issue. Did you try assigning a different wheel button?
Luckily this ain't a drink game, with the amount of "ah" in this video
Haha thanks bud! Have a great day!
Did you have a hard time getting it to clip in? I can’t get the middle clips to pop in
Yes! It was tough and required alot of energy to press in. I recommend pressing down on the whole top part of the headunit but make sure your applying force all the way across the headunit so you don't damage anything
GPS?
Yes there is gps!
How did you add that sti wallpaper?
I downloaded it via Google image and use it as a wallpaper in the settings
I'm sorry but this really was not an install video, this is jut Indoing Commerical nothing else
@@wrxstidima4287 Where is the installation step in the video!? or how did U add H/K module? check other installation or mounting videos on youtube from good channels .... then you will know
@@robertbilic4021 haha thanks buddy have a great day
@@robertbilic4021 I agree, just showed how to remove everything not much on the installation side of things
@Raymen Dinkha yeah you are right man! I take back what I said definitely not the best video. I appreciate the feedback man. I'll try to do better with my next videos moving forward
You are right my friend! Definitely could have done a better job. Appreciate the feedback
So do you put the 10mm bolts back in?
No you do not!