Installing a Double Din Radio in a 1997-2006 Jeep Wrangler

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ม.ค. 2025

ความคิดเห็น • 92

  • @slowblueoval1997
    @slowblueoval1997 2 หลายเดือนก่อน +1

    I just installed that same cell phone holder and it's the best one I have ever had.

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  2 หลายเดือนก่อน +1

      The Bullerproof? I have a video on that install

  • @18centwood
    @18centwood ปีที่แล้ว +2

    This had just the right amount of detail. Although I am not installing a different head unit, it all applies especially in older model TJs. The 2000s seem to have more videos but console is a little different. Thanks

  • @brettoetting
    @brettoetting 3 ปีที่แล้ว +4

    Slick, and you’ve got a C L E A N Jeep! Just had my TJ’s stereo done and love it, went with a Sony DSX-GS80 but I’m digging that Boss double-din for cameras. I’m feeling the need for a front when cresting hills and backup to see around my spare that sits high on the tire carrier.

  • @DavidRobushi
    @DavidRobushi ปีที่แล้ว +1

    Thanks!

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      Thank you David, this is the reason why I started creating videos to help people like you and others. Hopefully you're subscribed to the channel and enjoy all other videos I'll be uploading.

  • @khanhnguyen-hy6hg
    @khanhnguyen-hy6hg 7 หลายเดือนก่อน +1

    Did you ever connect the backup camera? I didn't see the video on your channel on that.
    When you ground the green wire (emergency brake wire) to the head unit ground cable, do you remember what the color is for that ground wire? Can that green wire be grounded to the frame? Thanks

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  7 หลายเดือนก่อน

      I have never connected the backup camera since I purchased the mirror which has the backup camera on it. Its been so long I don't remember what wire is with the green one. If its grounded then you can ground it on the frame.

  • @robertbare1007
    @robertbare1007 11 หลายเดือนก่อน +1

    Excellent video. I’m doing the exact mod next week and this was super helpful. Thanks

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  11 หลายเดือนก่อน

      Anytime! Subscribe and like to help the channel, thank you

  • @estevesr2
    @estevesr2 2 หลายเดือนก่อน +1

    I really enjoyed watching your video. I am replacing my original radio with a double din and your video helped me a lot. I have a question, regarding your additional USB plug that you installed. You connected your plug to the back of your radio. My new radio does not have a USB connection in the back, so if I want to install a usb plug, where would I connect it to have power?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  2 หลายเดือนก่อน +1

      @@estevesr2 Thanks for watching, one wire you will just connect to a piece of metal or screw and the red wire you can either connect to your red lighter plug of the fuse box

  • @JeffLudwigph
    @JeffLudwigph 2 ปีที่แล้ว +1

    I’ll take the radio for my son’s 2004 TJ

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  2 ปีที่แล้ว

      But it through Crutchfield like I did, reason being is the radio after a year froze and Crutchfield sent me a new one no questions asked.

  • @michaelh6946
    @michaelh6946 3 ปีที่แล้ว +2

    Amy updaye on the radio? I have everything except the radio and the double plug in (which one is that BTW?) for my build just haven't pulled the trigger on the radio yet!

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      The radio is working great, no complaints at all. If you look at one of the other comments I put the links for both the radio and the faceplate. You need to go ahead and get it done, not expensive and we'll worth the upgrade.

  • @marcosvalle8214
    @marcosvalle8214 ปีที่แล้ว +1

    Great job, need to add to my 97 TJ., Do you have the specs on the radio and the charging plug

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      The radio: www.crutchfield.com/S-OQNy0krXDgC/p_104BE7ACPC/Boss-BE7ACP-C-Package.html

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      The Extension Plug: www.amazon.com/gp/product/B07TTNF118/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

  • @Bluedemonde
    @Bluedemonde ปีที่แล้ว +1

    Thinking of getting this setup, how’s the radio holding up, worth it around 2 years later?

  • @ricardodacosta4652
    @ricardodacosta4652 ปีที่แล้ว +1

    Great video! Just purchased the unit myself, did you ever get around installing the backup camera? Trying to figure out how to wire the sucker lol

  • @claudiofuentes5155
    @claudiofuentes5155 3 ปีที่แล้ว +1

    Nice work bro

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      Thanks, I'm trying to get better on my video's. And be on the lookout I'm going to be doing a part 2 on how I'm going to screw the box on to the roll bar.

  • @Bluedemonde
    @Bluedemonde ปีที่แล้ว +1

    Hey! I am thinking of getting that bulletproof phone mount but they aren’t made for TJs, how did you mount yours?
    Did you just drill/modify the head assembly to be able to screw it in?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      Here is the link for the one I have, if you need help on installation I have a video posted on my channel
      amzn.to/47pshXA

    • @Bluedemonde
      @Bluedemonde ปีที่แล้ว +1

      @@FAFOWeekendAdventures thanks I was looking for the video but I couldn’t find it, is it in a playlist?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      @@Bluedemonde Here's the video: th-cam.com/video/YOeeqF3vc4U/w-d-xo.html Subscribe to my channel to see other upgrades. Thanks for watching.

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      Yes you have to drill holes in the dash

  • @Teawithlee
    @Teawithlee 3 ปีที่แล้ว +1

    Loooks great man!

  • @markmyers6472
    @markmyers6472 7 หลายเดือนก่อน +1

    Since Double DIN radios come in different size configurations.... which size is right for the TJ?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  7 หลายเดือนก่อน

      I'm not sure, but if you go into the website below and it in year make and model it will show you which radios and speakers will fit
      www.crutchfield.com/S-bX41DSK3OtQ/m_399/Car-Speakers.html

  • @paulcasper8996
    @paulcasper8996 11 หลายเดือนก่อน +1

    Off topic question, are your HVAC controls original? If not where did you get it? I am having trouble finding a new/good condition one with the a/c controls. Thanks. Great video by the way.

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  11 หลายเดือนก่อน

      Hello, yes my HVAC controller is original. Check on eBay they usually have original parts. Thank you

  • @prepperboss
    @prepperboss ปีที่แล้ว +1

    Do you have a link for the face plate?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  ปีที่แล้ว

      Here you go:
      www.crutchfield.com/S-FYLNbFEougm/p_120956549/Metra-95-6549-Dash-Kit-Black.html

    • @prepperboss
      @prepperboss ปีที่แล้ว

      @@FAFOWeekendAdventures thanks

  • @hansevatt
    @hansevatt 3 ปีที่แล้ว +2

    Can you post the links to where you bought the radio and dash

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      The radio: www.crutchfield.com/S-OQNy0krXDgC/p_104BE7ACPC/Boss-BE7ACP-C-Package.html

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      The faceplate: www.crutchfield.com/p_120956549/Metra-95-6549-Dash-Kit-Black.html

  • @904remi
    @904remi 3 ปีที่แล้ว +1

    Can you post a pic of wiring together

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      Sorry I don't have any pictures of the the wiring together. You can play the video until the part of the wiring and take a screenshot.

  • @odiazf1
    @odiazf1 10 หลายเดือนก่อน +1

    What brackets did you end up using? One is different than the other right?

  • @yourejustintim
    @yourejustintim 3 ปีที่แล้ว +1

    Thanks for another video. For the rest of the wiring harness did you just color match wires?

  • @kyleduval4706
    @kyleduval4706 3 ปีที่แล้ว +1

    Are you going to make a video on the camera?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      Yes I'm going to make a video on the installation of the backup camera, just being lazy. Give about 2 weeks and I'll get it done and uploaded.

  • @MrBNARick
    @MrBNARick 3 ปีที่แล้ว +1

    OOOORAH! 31B

  • @blakepauling7160
    @blakepauling7160 2 ปีที่แล้ว +1

    Where did you get the radio facial kit from

  • @lapopocagada
    @lapopocagada 2 ปีที่แล้ว +1

    Hola! Muy buen video! podrias decirme en donde conseguir una consola central como la tuya? (en la que adaptaste el USB port?) ya que mi jeep no tiene ese storage box y me gustaria conseguir una a mio. }}Saludos!

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  2 ปีที่แล้ว +1

      En ebay : www.ebay.com/itm/284585074040?hash=item4242979d78%3Ag%3AtmIAAOSwWRBhyjcE&fits=Year%3A1997%7CModel%3AWrangler%7CMake%3AJeep

    • @lapopocagada
      @lapopocagada 2 ปีที่แล้ว +1

      Muchas gracias! Está roto, creo :(

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  2 ปีที่แล้ว

      @Diego Martinez Ponle crazy glue😆

  • @kennethplogger536
    @kennethplogger536 3 ปีที่แล้ว +1

    What it the brand phone cradle is that. Can you post a link to that ?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      The phone mount is called Bullet Point Mounting Solutions and here is the link :
      www.bulletpointmountingsolutions.com/

  • @kyleduval4706
    @kyleduval4706 3 ปีที่แล้ว +1

    Did you have to connect the parking brake wire?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      Yes I did because if not it would not work

    • @kyleduval4706
      @kyleduval4706 3 ปีที่แล้ว +1

      @@FAFOWeekendAdventures did you bypass if so how?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      All you have to do is take the barking brake wire which should be green and ground it.

  • @hdfsfjhfkalsjfhlsaj
    @hdfsfjhfkalsjfhlsaj 5 หลายเดือนก่อน +1

    Did not connect the antenna

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  5 หลายเดือนก่อน

      @@hdfsfjhfkalsjfhlsaj was connected, maybe didn't show in video

  • @DonNagel9250
    @DonNagel9250 3 ปีที่แล้ว +1

    What did you do for the ashtray delete?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      When I purchased the radio mount it came with 2 ashtray deletes, a small tray and a flat plate. I used the flat plate on mine

    • @DonNagel9250
      @DonNagel9250 3 ปีที่แล้ว

      @@FAFOWeekendAdventures thanks!!!!! I’m buying one now!

  • @MACWIRELESS
    @MACWIRELESS 3 ปีที่แล้ว +1

    Where can i find this radio and mount ??? ! Thanks

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      Radio: www.crutchfield.com/S-k9uAtcSU8FB/p_104BE7ACPC/Boss-BE7ACP-C-Package.html
      Mount: www.crutchfield.com/p_120956549/Metra-95-6549-Dash-Kit-Black.html
      Make sure to like and subscribe to my channel.

    • @MACWIRELESS
      @MACWIRELESS 3 ปีที่แล้ว +1

      Thanks for your reply ! You think this will fit 1998 jeep wrangler tj sport ? Or do i need to do some modifications ?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      @@MACWIRELESS it will fit, my jeep is a 97 sport. Just watch my video because you will have to cut a small piece on the dash to install the radio

    • @MACWIRELESS
      @MACWIRELESS 3 ปีที่แล้ว +1

      Thanks for your reply ! Helped me alot ! So the back camera will work as well in this ?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      @@MACWIRELESS yes it will work, if your on my channel I will be installing my camera in a week or so and I'll post a review

  • @NHWilderness
    @NHWilderness 3 ปีที่แล้ว +1

    What is the name of the phone holder?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      I have a video on TH-cam of the mount. It's called: Bullet Point Mounting Solutions.

    • @NHWilderness
      @NHWilderness 3 ปีที่แล้ว +1

      @@FAFOWeekendAdventures I saw it I subscribed 2 ur channel and saw the video will it hold a phone with a case on it..I bought the cup phone holder for my work truck and my s 20 with a otter case just barely fit

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      @@NHWilderness Thank you for subscribing. Yes, it will fit with the phone case, i have an Android with a phone case and have no issues.

  • @nestorrafaelayala6600
    @nestorrafaelayala6600 3 ปีที่แล้ว +1

    where you buy the the face plate?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว +1

      I purchased it on Crutchfield.com

    • @i-mandarinastoresl8441
      @i-mandarinastoresl8441 3 ปีที่แล้ว +1

      @@FAFOWeekendAdventures can you add the link for the face plate and radio?

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      @@i-mandarinastoresl8441 For the radio: www.crutchfield.com/p_104BE7ACPC/Boss-BE7ACP-C-Package.html
      For the faceplate: www.crutchfield.com/p_120956549/Metra-95-6549-Dash-Kit-Black.html

  • @Zactj11Gaming
    @Zactj11Gaming 3 ปีที่แล้ว +1

    Was this from Walmart ?

  • @DumbCarGuy
    @DumbCarGuy 3 ปีที่แล้ว +1

    you didn't show that the other console was from a 2003 to 2006 dash

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      The console i purchased is for a 97-2006 dash

    • @DumbCarGuy
      @DumbCarGuy 3 ปีที่แล้ว +1

      @@FAFOWeekendAdventures I just went online and bought the DD Dash for the 97 -02. It's a single din dash 03 and up was factory DD sorta.. but I bought the conversion dash this am.

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      @@DumbCarGuy let me know how it works out

    • @DumbCarGuy
      @DumbCarGuy 3 ปีที่แล้ว +1

      @@FAFOWeekendAdventures Worked out pretty good. Just a little tinkering. I had to use spacers behind the heater lever console to move it closer to the new center console. Then I had to ad a screw to the face down low in the center because those snap together things didn't want to hold so well. They held but I liked the screw, now its not gonna pop loose.

    • @FAFOWeekendAdventures
      @FAFOWeekendAdventures  3 ปีที่แล้ว

      @@DumbCarGuy Glad it worked out

  • @beckydayedgar1764
    @beckydayedgar1764 8 หลายเดือนก่อน +1

    I have 2006 Jeep Wrangler tj