CR-10 UPGRADE - GUIDE on flashing Bootloader and Custom Firmware for the E3D Titan Aero Upgrade
ฝัง
- เผยแพร่เมื่อ 12 ม.ค. 2018
- I'll show you how you can flash a bootloader and upload a custom version of Marlin on your CR-10. This is the first part of the 2 part series, in which we will upgrade the CR-10 with an E3D Titan Aero Direct extruder.
Buy a CR-10S on GEARBEST: goo.gl/GBjEJW
Buy the CR-10S on AMAZON: geni.us/rVBsR
Things you should have:
Original Arduino UNO: geni.us/EmL29a6 OR
Arduino UNO clone: geni.us/T1VwAj8
Jumper Wires: geni.us/kvEd8
Arduino IDE: www.arduino.cc/
Marlin 1.1.6 for Titan Aero: github.com/CNCKitchen/CR-10-m...
Sanguino URL: "raw.githubusercontent.com/Lau..."
Written tutorial: www.instructables.com/id/Flash...
Quick Dial Knob: www.thingiverse.com/thing:275...
💚 Support me 💚
Patreon: / cnckitchen
Join as a TH-cam member!
Original CNC Kitchen Threaded Inserts: geni.us/CNCKInsertsChoice
Merch: teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: geni.us/CNCKPrusa
PayPal: www.paypal.me/CNCKitchen
Shop at Matterhackers(US): www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): geni.us/zHvnB
🎙Check out my PODCAST with Tom Sanladerer
/ @themeltzone
⚙ My gear (Affiliate Links):
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: geni.us/vEwqD
12-35mm f2.6 - Great allround lense: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
🏆 Do you want to help me cover my running costs? Send me a dollar or two over PayPal, it helps me a lot!
www.paypal.me/CNCKitchen
🌼 Even watching the ads before my videos helps me a lot!
Follow me on Twitter: / cnc_kitchen - วิทยาศาสตร์และเทคโนโลยี
Just wanted to thank you. This was exactly what I needed to get the bootloader done. Once one gets the bootloader in the rest is fairly simple. Now comes the work of fine tuning. I have been very happy with my CR-10 and have a CR-10S on order. I think I will wait for the warranty to run out before upgrading the S model ;-)
Thanks for the video. I was doing the same mod on the CR-10. You really wrap up all the info in one video. Last time it tooks me 2 days to put Marlin 1.1.6 on my CR-10. Now it tooks 40 mins with the video
This video came right in time for me, as I'm planning to fiddle with the firmware for the first time soon. Very easy to follow and great style of presenting, subscribed immediately! Would also enjoy that video on linear advance :D
You should definitely make a video about linear advanced!!!
I was waiting for this video! Thank you!
Also, I would like to know more about linear advance!
I think that doing a video on linear advance is an awesome idea! I understand the general idea, but i would like to have a more in depth explanation of the feature.
oooh, definitely want to learn more about linear advance, sounds cool. If what i've heard is true, it's also substantially faster, at least on Prusa printers
Me too! Cant wait!
Thanks for the detailed video! It's just what I needed.
I like short to the point all step videos like this good job
Linear advance video would be good.
Keep up the good work...
It would be great if you do a video about the Linear Advance
I got the over extrusion on the corners when I started using LIN_ADV...
Yess on the linear acceleration video!
Linear advance is a fantastic feature, it works great on my Original Prusa i3 MK2. Glad to see it has been included in the standard Marlin to give everyone the same goodies.
Great video, I love techie stuff. Although I don't own a CR10, it's still interesting.
This is what i was searching for!
Thank you for the channel. Do you know if this upgrade will work with the 5S large print bed?
Also do you know if the 5S ships with the CR-10S firmware or the CR-10 firmware? Thank you in advance for any input, you have been very helpful so far.
Very informative! Compliments!
Nice video, Stefan.
One warning to add, though: be sure to unplug any SD cards from your printer before flashing a bootloader or firmware via the ICSP/ISP header. A lot of printer boards share the wires between the SD/mini-SD/micro-SD port and the ICSP/ISP header. There's a non-zero chance of trashing any SD card that's plugged in during ICSP/ISP programming.
Thanks for the great video. I +1 for further details about linear advance.
Please make a vdeo on linear advance (how to configure it, etc...)!
please do linear advance!! Great channel
Yes to linear advance! 🤞🏼
I notice you have links to Buy a "CR-10S" in the Description notes; I hope this is not to be confused with the old "CR-10", because the old CR-10 is what I'm thinking this upgrade video is all about.
Hi!... can I do the same with an Arduino Nano? (I have one in home)
thanks for the time to make the video! it is very good, I learned a lot!
Hallo Stefan, Danke für das Video! I have a slight correction though: @01:55 you mention that Boot loader is not required for a CR10S (Which I have)- entailed is a Creality V2.0 board. I took me 2 Days and a lot of forum surfing to chase the misleading error messages (things like avrdude: verification error, first mismatch at byte 0x0000
0x14 != 0x0c)- turns out that apparently my board did not have a functioning bootloader installed.
BTW I installed Marlin 2.0.1 with no problems (so far), now I need to do the direct dual drive extruder and the linear rails installed.
Keep up the good work!
I would love to see a video on linear advance!
Thank you, this was great.
Hello Stephan, nice video! Explained alot.
Lin. Advance might be a nice video as well.
I have a Conrad Renkforce printer with an old sidebranch of repetier firmware. I ended up patching the firmware to the newest Advance code by myself. Well: Topic understood, Fluid dynamics understood, Coding understood + it works. But the real deal is to find the correct advance parameters for all the filament I have. There should be some formula using the e-modul of each filament to get the best values. Well, yeah.. what a hobby. Rightnow I ended up putting the value to some quite random number inbetween some limits I read in the internet :D . And I really do hear it working but I dont really see much of an effect to edges, a tiny one - maybe. Higher speeds should reveal more?
One thing migth be better than edges: When I printed the first prints with lin advance It seemed to clog my nozzle quite fast (using stiff filament, PLA). This clogging ended when all the dirt inside my nozzle got shaken away by lin advance. For me this effect was the most impressive one. But I am still having trouble to believe that this really was the reason for my clogged nozzle. If it was, that would be just an awsome sidefeature of lin advance.
Make a linear advance video. That would be super helpful
Thank you so much for this.
I broke my CR-10! I blame you! Just kidding. Your videos are very good and I enjoy following you on you tube. Cheers!
Hi thanks so much, a very timely video. I was looking into installing a boot loader and updating my firmware.. so I used your links and version of Marlin.
For my CR-10 some changes needed to be made. Like the Y Direction and the extruder steps/mm (Y DIR = true, extruder steps/mm = 99) these may be different for others but that's what I found worked for me. however somehow in my copy of your marlin the extruder was set to 803.. which is just under 10x the amount of feed you need. So you might want to check it.
thanks again.
As I pointed out, my version of Marlin is already adjusted for the Titan Aero Extruder and due to its gear reduction needs a ridiculously high steps/mm for the extruder.
That explains the value. It would take you longer than it took to do the video to dial up the 803 value. Did you change other default settings too? My CR-10 is printing much better at higher speed now. I will experiment with Marlin 1.1.8 now and see how things go. Thanks again for the video and the resources.
I also changed the homing location to Y=-10 I guess.
Stephen, it's not related to your video, that by the way is awesome and I plan to perform it soon, but after replace my J-Head, including thermistor I got an err: MAX TEMP.. I cannot get rid of it.. tried to disconnect cables, switch thermistors plugs into the mainboard.. all these didn't work.. is there anyway to reset the mainboard? I suspect that somehow the trigger "MAX TEMP" was shot while I was replacing the JHEAD and it get stuck into the eprom.. please tell me your thoughts. Any advice is appreciated.
Did you also already upgrade your CR-10 firmware. What's your experience and which version of Marlin can you recommend?
Looking for a good deal on a new 3D printer and want to support the channel? Take a look at the affiliate links below and in the description:
Get a Creality CR-10 on flash sale for $389.99: goo.gl/LNHdbh
Get an Alfawise U-10 on flash sale for $455.99: goo.gl/ddPi4v
Get a Anycubic I3 MEGA on flash sale for $349.99: goo.gl/fH6o3M
Get a CR-10s for $440.99 with the code "GBsale127" : goo.gl/9WPzYo
Get a JGAURORA A5 for $335.99 with the code "GBsale129" : goo.gl/2UnFpu
Upgraded a CR-10S to .17 and need to move to .18 as there's a bug with the filament sensor in .17. Overall an excellent upgrade and easy to do with a bootloader installed already on the 10S. I believe the base 10 won't take the full Marlin though as it's got limited storage, did you not find that to be true?
I was able to flash the boot loader using your instructions. Thanks you! However, there is an error when attempting to compile your custom Marlin firmware.
Did you have a memory error?
I upgraded as soon as I got my printer because not being able to change the default preheat settings made me mad. Since then I have done many mods including the Titan Aero which it is working on it's first print right now (a calibration cube). I am still on .15. I really need to check out the change logs on the new builds. Since I'm on a CR-10 and not a 10s the storage is a big limitation. I just turn off all of the features I don't care about/need to get around it and so far it has been OK, but there are lots of things I would like to have enabled just to use occasionally that I can't have because there just ins't room. I love your videos and as crazy as it may sound, that Prusa style nob for the CR-10 is one of my all time favorite prints, that thing is a game changer!
screen is set to such high resolution that I can't read anything in screen shots. What CPU does 10S use and other points you referenced? It would be helpful to mention them explicitly without relying on screen shots.
th3d 1.1.7. is good
have you checked your cr 10 s square... left upright leans backwards needs pulling forward with a brace
I have the CR-10 plus with the 500x500x500mm print area. will this upgrade work the same for this printer?
Please do the video on linear advance. Thanks!
Hello, as you know, also for Ender 3 Pro is it necessary a bootloader to flash firmware? I've a titan aero clone to install in my ender 3 pro.
can you update this for marlin 2.0 if you already haven't? i'm wondering if the marlin files i was given when i bought the printer my printer can be used, on 1.1.8 now and wanting to use configuration files so i don't lose any settings, though if i made your mount i'd end up using the files here and probably get way better results since you know better than me and the guy that sold me my cr-10s about 3d printing.
Years later... (lol) A 'How-to' using a USBTinyisp and/or
USBasp would be great.
Also, a 'How-to' replace the stock Melzi (ATmega 1284/1284P) control board with a better and very inexpensive (almost plug-n-play?) board, perhaps a MKS Robin E3 integrated 4 TMC2209, et al. would be awesome. 😉
Hi, I have seen that it is not necessary to use an Arduino board, and that you can upgrade to Marlin from the USB.
Is that right?
Have you had any issues with the firmware between a CR-10S500 and the E3DV6 Titan Aero?
Hi :D Is it possible that I have deleted the BOOTLOADER on my CR10S5 (which I think comes stock on it) by installing the BLTouch firmware for the Ender 3 using the progisp.exe program and the ATmega 1248chip option instead of the 2560chip over the provided USB to 6Pin cable that goes on the main board?
Could this be the reason why my CR10S5 will no longer communicate with the PC?
Please help :D
I couldn’t fine a place to post this so here it is. I have changed both heating element on the extruder and the thermal sensor. When I turn the printer on and turn the temperature up to 210. The temperature does nothing and then I get the error saying E1 thermal runaway printer halted please rest. Should I do a PID to fix’s this issue or could be the
main board that has went bad? Any help would be appreciated.
Does the CR-10s also requires an external bootloader?
Hi i Have a CR-10s, which part do i start from?
About leveling: 4 corner leveling would not solve not flat build plate. Even good glass can have more than 1 layer height from min to max. About ddrive aero upgrade: does you found problems due to the extra weight and the cantilever x axis?
It actually works really well. Video about the Titan Aero is going to be out Saturday.
would this work on the board for the CR10v3? i cannot get it to connect to my computer to update firmware
Bro I don't know if buy cr10s or prusia mk3 , what do you recommend me?
I was able to flash the firmware successfully but now all I get is a blue screen on my display. I flashed it while it was powered up. Does that matter?
Endlich! Danke!!
What do you think about the manual mesh bed leveling feature in marlin or why don't you use that?
To be honest, I just found out about that feature recently and didn't have the time yet, to try it out.
When I try to follow your guide it gives me a warning at the bottom of Arduino saying the sketch uses 96% of the memory and the maximum aloud is 93%. This could cause I'm unknown issues yadayada. However it fails to upload Everytime, just says unknown error occured. What do I do? Can I disable some feature to make memory?
Did you design the mount on your own? It does not look like the ones from KRushin and MP23Racing i found on thingiverse. Will you upload the design and a part list for part 2? Would be nice i people could order the parts in advance to have them when you release part 2.
I slightly changed the mount from evil_k. If you want to print the parts for next weeks video then take a look at these:
Mount: www.thingiverse.com/thing:2756792
Cable support: www.thingiverse.com/thing:2460377
Distance spacer: www.thingiverse.com/thing:2756795
Fan shroud and holder: www.thingiverse.com/thing:2756800
Hi,
Thanx for your video !
I'm trying to do it on my Cr-10 printer. All videos show to use arduino Uno, I have Arduino Leonardo. Do I connect everything in accordance with the instructions, because it does not work with me ... :(
This error pops up in the window:
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 1 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () file 2 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 3 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () file 4 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () file 5 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () file 6 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () file 7 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 8 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 9 of 10: not in sync: resp = 0x03
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () file 10 of 10: not in sync: resp = 0x03
Error while burning bootloader.
I'm lost and I do not know how to do it ...
Hi! Can upgrade this firmware on my CR-10 PLUS (500x500x500)? Thank you
Is the flashing and firmware upgrade Procedure the same with the Arduino UNO clone? :D
Yes
Stephan is working with a CR-10, but if you have a CR-10S I highly recommend referring to this article to get some more out of the upgraded motherboard: printedsolid.com/blogs/news/installing-marlin-1-1-6-on-your-cr-10s-with-mesh-bed-leveling
Specifically, the manual mesh bed leveling has taken my first layer adhesion to a whole other level. You should also take the opportunity to redefine your PID tuning values to account for your new hardware when you install a volcano.
As you already have a Volcano hotend, have you gave it a thought to install klipper instead of marlin?
Nope. Worth it?
Don´t know yet. But as soon as I have done my Titans Aero update on my CR 10 i am going to try this as well. But maybe i try on my Ender 2 first. It has less mass to move with the small build plate, so that could speed up printing as well.
But have a look yourself blog.adafruit.com/2018/01/18/walkthrough-and-demos-of-the-klipper-3d-printer-firmware-project
I tried this but get
avrdude: Expected signature for ATmega1284P is 1E 97 05
Double check chip, or use -F to override this check.
Failed chip erase: uploading error: exit status 1
Hi, i'm having problems connecting my Melzi to Arduino, don't appear in any Com of my computer. Whan i'm missing?
This flat out just is not working for me. i type in the hyper link like you do on your video but my ok is greyed out and it will not take it so when i search sanguino in boards no results. even tried doing it the way the website says that you reference with the wiring from board to board and nothing.
aha the corner thingie.. well done to mention that one
Doesn't work...I keep getting errors stating, "programmer is not responding" and "attempt 1 of 10: not in sync: resp=0x00". I tried restarting my mac but with no success.
Hi. I really need help with my 3D printer .
I burned my mcu, so obviously I bought another one, the same as the old one. Soldered but now I have a blue screen, yeah, noob me.
The motherboard is v4.2.2 ender 3 pro, MCU - GD32F303RET6.
Can you please guide me on how to burn a bootloader on this thing? I think I've tried everything I could.
Still getting the error with the right processor, sanguino selected and downloading the u8glib library
Sir. Please gt2560 3d printer motherbord bootloder video upload.
Boah du hast mir so hart den Arsch gerettet mit der library hinzufügen manuell als download in IDE
U8glib-HAL
...jetz löppt mein CR10
Is there a way to do this with Raspberry Pi?
hey :) i did everithing like you :) marlin is on board but when i switch from usb to vreg back and turn on my printer it doesnt work ... display is on for a sec but then is dead all time and when i turn it of the same :) .... but when i switch on usb again firmware and also display work :) can anybody help me with this issue ? :)
is linear advance coming soon?
Probably not.
Arduino: 1.8.5 (Windows 10), Board:"Sanguino, ATmega1284 or ATmega1284P (16 MHz)"
De schets gebruikt 126272 bytes (97%) programma-opslagruimte. Maximum is 130048 bytes.
Globale variabelen gebruiken 15292 bytes (93%) van het dynamisch geheugen. Resteren 1092 bytes voor lokale variabelen. Maximum is 16384 bytes.
Weinig geheugen beschikbaar, er kunnen zich stabiliteitsproblemen voordoen
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x73
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x74
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x61
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x72
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x74
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0a
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x65
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x63
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x68
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x6f
Er is een fout opgetreden bij het uploaden van de schets
Dit rapport zou meer informatie bevatten met
"Uitgebreide uitvoer weergeven tijden compilatie"
optie aan in Bestand -> Voorkeuren.
he says this can not load
Hey there, as i opened my controll box i saw that my board was green instead of black and it has no Jumper for VREG/USB. Can i skip the steap with swapping the jumper and the rest is the same?
same here, can we skip this step?
I've done some research and found out that the green board without the jumper is a newer version, the v1.1.2 and that version already has an bootloader, so you should be able to install the firmware directly over usb.I will test it now.Nevermind if that is outdated, but i just wanted to reply :Dwww.thingiverse.com/groups/creality-cr-10/forums/general/topic:25767
jan5549 Did this work? I am really struggling to get it right. On that link it seems like they are all talking about different boards.
i get an error at the last step. says com device does not exist
Will the modified marlin firmware work on a s4?
Check out the TH3D firmware which should be compatible with the s4.
When your cheap and dont want to wait, ended up soldering the connections to my board haha
Hello there, when i try to flash my CR-10, it said Low available memory, stability issues may occur. An error occurred while uploading the sketch. How can i solve it?
That's totally normal. Don't worry.
Well, so what happen if it does'nt transfer because of this error, what should I do?
I forgot one thing, it also said : avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x73 Do you know this error? it count thrue 10 and said An error occurred while uploading the sketch
Restart your computer.
@@CNCKitchen That still doesn't work. Any other suggestions?
What if you don't have the jumper?
Just see if you board blinks when you connect it via USB. If it does it should also work.
LOL, an auto transliteration must've been approved (or semi auto?) - it has quite a few different and hilarious errors for the word "CR-10". "Seriatim", "cereal 10", "seer 10", "C return"...
(I only fixed some of it, other people are welcome to take a look and fix it some more)
Hello, my extruder run backwards😞 and the y axis shows +10 after autohome
Seems as you have fixed your upload problems ;-) Invert the extruder direction: (#define INVERT_E0_DIR false) Offset is defined here: #define MANUAL_Y_HOME_POS -10
CNC Kitchen I will have to change this in the marlin.ioe ? And then upload again
+brunn eu This should be in the config file.
CNC Kitchen is there any search option in arduino ide?
Which zeilennummer is it?
configuration.h: Line 765 and 991 ==> search/find via CRTL+F