BUYING BROKEN MOTHERBOARDS FROM EBAY TO FIX OTHER MOTHERBOARDS | MSI X370 Gaming Plus Repair Motherb
ฝัง
- เผยแพร่เมื่อ 1 มี.ค. 2024
- My Tools:
DDR3 and DDR4 Post code tester (white ddr card): s.click.aliexpress.com/e/_DlP... *
Tweezers: de.aliexpress.com/item/400120...
Soldering Station AIXUN T3A T245 B Set: de.aliexpress.com/item/100500...
JBC tips that i use: C245-906 (bought of a german retailer) , C245-030 (bought of a german retailer) , C245-908 amzn.to/47eHP05 * , C245-752 amzn.to/47BqxtO *
PCIE Post Card: s.click.aliexpress.com/e/_DFG... *
Side Cutters: de.aliexpress.com/item/330008...
DDR3 DDR4 Data line Tester: s.click.aliexpress.com/e/_DeX... *
Pre heater: s.click.aliexpress.com/e/_DdL... *
Reball jig: s.click.aliexpress.com/e/_DDB... *
needle probes: s.click.aliexpress.com/e/_DDV... *
CH341A Bios chip programmer: s.click.aliexpress.com/e/_DDS... *
Soder Wick: s.click.aliexpress.com/e/_DB4... *
Microscope: s.click.aliexpress.com/e/_DBw... *
Microscope Ringlight: s.click.aliexpress.com/e/_DdR... *
Microscope Arm (used 3D printing to make it work, can provide an STL if needed): amzn.to/3R1hn48 *
Power supply: s.click.aliexpress.com/e/_DlM... *
12V to 24pin ATX adapter: s.click.aliexpress.com/e/_DF6... *
Components Tester: s.click.aliexpress.com/e/_Dl1... *
Hot Air: Some Quick 861DW counterfeit
The Flux i use sucks, so dont buy it lol
The Copper wire i use is 0.1mm Enameld wire, link is dead, but the wire wasnt great anyways
Oscilloscope RIGOL DS1054Z amzn.to/3R2aDmE *
Thermal Camera Seek Compact amzn.to/47hGeX6 * (I would check out the infiray P2 Thermal cameras to be honest if i wouldnt have already bought this one!)
Multimeter (cheap one for beginners, that i still use): UEZNIRN IEC61010-1 multimeter
UV light: amzn.to/40L0fD1 *
/ mainboard_medic
Links marked with * are affiliated links and i get a small comission from them without you paying extra. (The * is not part of the link)
For any business inquierments:
Xorat.business@hotmail.com - วิทยาศาสตร์และเทคโนโลยี
Very informative thanks a lot we need more content on ATX motherboard repair in english like this.
Ceramic capacitors short circuit during momentary voltage increases. This is quite popular. It is usually caused by filtration problems in SMS power supplies. to pc
Audio systems connected via 3.5mm may encounter instantaneous voltage between +12v and +90v due to the opamp problem. There is also a short circuit problem in the Electrolyte solid capacitors on Gigabyte motherboards. It is one of the rare problems. Good job.
I think that Sorin say: "no capacitor no shorted capacitor". Thank you for sharing, next video fixing 12v adapter :D.
I have a Gaming PRO, after some tinkering I can't understand what is siphoning power from the BIOS (it only gets 0.45V instead of 1.8).
I suspect another component that sits at around 50+°C doing nothing. Debug LED sits at Cpu error as BIOS isn't working.
Now I'll inspect thoroughly with a camera for broken caps. Watching gave me an idea :)
Glad that i was able to help you! If you have a boardview you can also check specificly what is on the 1.8V line and inspect those components!
Well done. Good repair 👍
Great Job 👏
Very good video. Thanks for sharing.
mmm pondering my old 2011-x3
So, did you replace that capacitor before you did the final testing, or did you leave it of and is everything working fine without it?
Thanks for a very informative vid, hope you can fix the adapter
I did leave it without the cap!
Интересное видео. ❤Спасибо. ❤
Where do you get the board schematics from? I've a few boards lying about that just stopped working, I would like to give it a go and try fix them.
Different discords like Electronic repair school for example. Sometimes you can just google for them, but most off them are for sale and you will have to purchase them. I also often buy them.
Those tiny MLCC caps are very vulnerable, and can die from any number of reasons. The issue being that the ceramic layers are very very thin and brittle.
hi sir you have msi z390 a pro board view
Hello 🤝good job 👍👍👍👍👍👏👏👏👏👏👋👋👋👋👋
Wonderful work, I also buy from eBay, do you only repair AMD boards only?
I have one AMD board that does not turn on with CPU installed what could be wrong?
No i do all board, but i like to do amd. Well the obvious stuff would be CPU 12V to ground and CPU 12V to VCORE. Also check the other CPU Voltages like 0.9V i think it is, if that is present on the board. There are like "logic" voltages for the CPU as well that might be bad.
@@MainboardMedic thanks a lot man will look into that
Can you please tell where I can locate the power bottom on motherboard. So I can manually power on by shorting
That would be PSON. That is on the 24 pin the 4th pin from the bottom on the right. Connect that to gouind and it will start. But be careful with this, it could destroy something on the board!
if he can fix it the msi boards the board is quite good and still have alot of life
I've also learnt something ..without a thermal cam its virtually impossible to fix boards with this size.
Jap, using IPA or your finger would take ages on this board, would be easier just to blow the cap up at that point or wait for it to boil!
I hope i have viewers too 😅