Compact. Powerful. With Style. | SSC2 2" LED Pods by Diode Dynamics
ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2024
- Get your SSC2 LED Pods here: www.diodedynamics.com/off-roa...
How do we test and measure products? Learn more here: www.diodedynamics.com/product...
Introducing the SSC2 2" LED Pod! Featuring higher output intensity than any other 2” light on the market, these LED light pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a compact 2" size. With four standard backlight options, these pods are a powerful light option that can be mounted virtually anywhere on your vehicle, including spots where LED Light Bars are not an option.
Our SSC2 2" LED Pods are fully engineered, tested, and assembled in St. Louis, Missouri, and are backed with an industry-leading 8-year warranty!
Email us with any questions at contact@diodedynamics.com or call 314-205-3033. Thanks for watching!
Products Shown:
DD6405P
DD6406P
DD6408P
DD6409P
DD6433P
DD6391P
DD6412P
DD6436P
DD6434P
DD6435P - ยานยนต์และพาหนะ
Yes! Excellent recap Paul. Looking forward to putting up my review on them! They're beauties, and just going to say that DD has always done LED accent lighting the best. Awesome that we get to see you push this tech further.
I finally found the lamp I've been wanting for a long time. It's compact, bright enough, and versatile. Thanks to Diode Dynamics for a great product.
Real trick stuff Diode Dynamics! That back light mode for use as a rear running or side amber light is an excellent feature that really expands the functionality of those flush mount lights.
Thank you for the kind words!
Exactly what I was looking for at just the right time. So excited to order these!
These look great! Can’t wait to get them installed on the Jeeps!
We're excited to see them installed on the Jeeps!
Awesome, just bought a pair for my motorcycle
Awesome!
You do great videos, but if you could do what KC does and add some footage of them on a truck at night, on the road and trail, that would be awesome!
Thank you for the feedback and suggestion, John! We'll pass it on to our media team and continue to improve.
🔥🔥🔥🔥🔥🔥🔥🔥🍻
Cheers!
I have the SS3 Pro yellow fog and they are awsome. Trying to find a place for these new ssc2!! I'd like to see a comparison of the white light and the white with the yellow cover vs the yellow light.
Keep an eye out! We will be releasing comparison videos for the SSC2 in the future.
Are your pros too bright to use in traffic? I have a motorcycle and I’m debating on getting just one fog light to rest just above front fender. Don’t know if I should go with pro or sport for everyday use
@@jaybee5919 not really. Mine is the fog version and are installed at the same height of the original ones, so you can clearly see it lights the bumper of the front car, but not above. If you stand in front of the car you see it is turned on but do not get blinded.
Hi Paul. Looks like yet another technical marvel created by the best.
I've been looking for the dimensions of these units, especially the flush mount edition. Can you provide?
Sure thing! Check out the link below and scroll to the image furthest to the right. This is the full dimensional drawing of the SSC2!
www.diodedynamics.com/stage-series-3-sae-dot-white-sport-standard-led-pod-pair-1.html
I have 2 ssc2 sport on my sur ron, they are awesome, very good quality, never had water or even fog inside them, I will switch to pro asap, and test all the lenses, love this shit ^^ , if they where doing a all in one smal tail light (light+brake+turn signals) I would defenetly buy it, tired of changing my tail lights every now an then
Hi Paul great video, which Led diodedynamics should I purchase for driving light?
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and we would be happy to help you find the right light!
My amber backlight on one of them went out after a week and the other one flickers. I reached out to you guys 3 days ago without anyfeedback
Hey there! Sorry to hear that, Our service team is available to chat now! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you!
Wow, these are gonna sell like hotcakes!
Do you have a SSC2 Max coming? SS3 won’t fit but wondering if I should wait to order
Unfortunately, we don't have SSC2 Maxes in the current plans.
Are the SS3 pods going to be available with the backlight?
We do hope to offer the SS3 with a backlight option in the future!
Can I use 5pin relay using 87a for the backlight? Hook it up to acc like ignition? So when you start the car the backlight will also turn on right away
Yep! You could do this.
Is there any chance to have it without the backlighting? Just on/off?
There sure is. You would just have to disconnect the wiring for the backlight!
Would a single ssc2 pro fog light be too strong for use in traffic? Plan on installing just one on my motorcycle for everyday use. What’s your opinion?
Hi there! We responded to your other comment!
Is there a way to power the back light and main beam at the same time?
Our included harness does not offer a way to power both at the same time. Sorry about that!
Can these be mounted upside down (under a roof rack instead of on top)?
Yes, they can!
Can both legs on the wire have power as in to activate the beam and once the switch is off the back light comes on ..if the back light wire was on all the time and the beam light switched ..or do i have to un power the back light then power the beam ..hope i make some sense
That makes sense! You can have both hot wires on at the same time, however the circuit board inside shuts the backlight off as soon as the main beam is active, so there's no need to worry about burning out your backlight, or switching between modes manually!
@@diodedynamics thank you i plan on wiring to my auxbeam switch board on two separate switches..my fear was that i would forget to shut off the back light and activate the beam and short my light ..but from the looks of it i shouldn’t have a problem thank you
will these come out with the new max design?
Hi there! We don't have any plans at this time to release a Max SSC2. However, this may be something we decide to offer in the future!
Does the amber/yellow version still put out enough light to use on trails, or is the white recommended? I was thinking of the amber backlight for my KTM adventure bike for safety, then flip the switch for the higher output for trails.
Our yellow pods have more than enough power to let you see on the trails at night! We recommend our Pro Yellow Combo for the best all-around visibility, with both distance light and close-range fill light, close to the bike!
Here is a link to them:
www.diodedynamics.com/stage-series-2-sae-yellow-pro-standard-led-pod-one.html
Great video and information thank you.
Can i purchase a flush mount kit and add these as a flush mounted light on my bumper?
Absolutely! That is a very common application for our flush mount pods! Here is the link for you :
www.diodedynamics.com/led-off-road-lights/led-pods/ssc2.html
Need this for Toyota Fortuner (2014), how can I get this
You can find them in the link below!
www.diodedynamics.com/off-road-auxiliary-led/led-pods/ssc2.html
Can this be use for Motorcycle applications?
We have had a ton of customers install these for fog lights or additional lights, using our Roll Bar Mounts! I'll leave the link for those below:
www.diodedynamics.com/stage-series-universal-roll-bar-mount-kit-one.html
can it be mounted upside down?
We wouldn't recommend that the fog optic SSC2s are mounted upside down because their lenses are slanted to properly orientate the beam pattern. However, the other lens options can be mounted upside down!
@@diodedynamics Is there mounting point on the top instead?
@@HyperspeedMedia No, there is no mounting point on top. However, our universal bracket swivels on it's access nearly 90 degrees. Because of this they can be mounted upside down from the universal bracket, and even aimed straight down.
@@diodedynamics okay thank you
With a central switch panel like SwitchPros, Auxbeam etc, how do you wire to activate the backlight mode?
You will need to make sure that they are wired to a 4 pin switch. It will need to have an option for mainlight, backlight, and off.
@@diodedynamics I’m not super familiar with those systems just doing my research atm but it doesnt seem like the 4pin route is an option. Can you wire two separate buttons? One for backlight and one for mainlight?
@@ryanskeete We apologize for misspeaking. The harness is a four pin harness. You will need a 3 way switch, such as the one in this listing:
www.diodedynamics.com/heavy-duty-dual-output-3-way-4-pin-wiring-harness.html
Our service team would be able to give you more wiring information. You can get ahold of them at contact@diodedynamics.com!
Intro song had me thinking this opened a @jeremysiers video
Can you flash strobe the amber backlight?
Yes, you can. However, you will need some sort of a controller to do this (such as a SwitchPros).
@@diodedynamics great that is what I bought
Daddy likes!
Can I mount it to plastic?
They could be mounted to plastic as long as it is a strong plastic!
@@diodedynamics Which one if your wiring harnesses will work with these lights?
@@seangowan7441 www.diodedynamics.com/heavy-duty-dual-output-3-way-4-pin-wiring-harness.html
Y’all shittin on Baja designs