Found another awesome person doing Harley content. Your procedures are very detailed and will help people work more on their bikes. Keep up the great work. Ride safe and stay warm. Cannot wait for the handlebars video. I have a Kraus setup on a 2019 FLTRXS.
Thanks for the comments, much appreciated! I finally got the rest of the cables for the Low Rider bar change and gauge relocation so that will be getting filmed here soon, can't wait to have it all converted over. Have a good new years and stay safe.
Thanks for the comments and the feedback. It’s greatly appreciated. I think it turned out pretty good as well and love the look and options too Ride safe and happy new year.
My LRST now had fwd controls installed, the stock bike still has the short mid controls linkage. If you have not installed the fwd control setup, it will not fit.
Ok. So I guess HD is just saying it doesn't fit the stock bike. I will be putting on forward controls so it shouldn't be an issue. Thanks for the info. Will be using your videos as an installation guide. Great stuff. Thanks again.
Thanks for the question, looks like out of the 9 options for the triple play, option 7 is called a constant blaster x-pattern. I am guessing that is all 3 lights brightened. Hope that helps, here is the link on the settings: www.customdynamics.com/media/wysiwyg/Modules/GEN-SMART-TPU-HD_3-pin-plugs-wpc_.pdf Ride Safe
Thanks for the info, I would hope that the local dealer or distributor would be able to guide buyers on what will and will not work for their specific application and location. Ride safe
Great question. I did on my RGST, as well as the LRST. I think it’s a module affect. You could ask Custom Dynamics on the triple play part. The LED inserts alone did not show that behavior. They had a regulator for older models to stop that but didn’t apply here since the lights flashed properly. I just ignore the faster flash on the dash. Ride safe.
Did you mount the triple play in the spot you said you were going to..? Did it get in the way of the seat..? I’m doing the install wanted to see if that was a good spot to mount it..
Thanks for the question. Yea, I did and it fit perfectly. Just grab a velcro roll off of Amazon and stick one side on the triple play and the other on the fender. I also tie wrapped the sloppy wiring up as well so it was clean. Glad you are adding it, you will love it. Ride safe.
@@chg2799 You are very welcome, if you rewatch the video, at about 38:10 I show a pic of the finished attachment and where I put the connectors next to the side. Sits flush and does not interfere at all. Good luck and have fun!
Thanks for the follow up question, I did not have any codes get thrown up on the gauge, so that's great. I do however try to unplug the main fuse whenever working on anything electrical when possible to help avoid that chance (if I remember ;-) Thanks again and ride safe!
Found another awesome person doing Harley content. Your procedures are very detailed and will help people work more on their bikes. Keep up the great work. Ride safe and stay warm. Cannot wait for the handlebars video. I have a Kraus setup on a 2019 FLTRXS.
Thanks for the comments, much appreciated! I finally got the rest of the cables for the Low Rider bar change and gauge relocation so that will be getting filmed here soon, can't wait to have it all converted over.
Have a good new years and stay safe.
Cool setup on the lights with the different lighting modes!
Thanks for the comments and the feedback. It’s greatly appreciated. I think it turned out pretty good as well and love the look and options too
Ride safe and happy new year.
Thanks for the video. I’ll refer back to this when it’s time to install my lights.
Glad it was helpful.
love the triple play !! i will get it for my st
Thanks! I am pretty happy with it.
Ride Safe
Love watching your videos very clear and precise doing a lot of the stuff you have done thanks from the UK
Thank you! Much Appreciated!
Ride Safe
Great content JKB! All the stuff I want todo to my bike! Thanks for all the info!
Thank you! I appreciate the feedback and am glad these videos help you with some ideas.
Ride safe.
According to the HD website, the black shift lever does not fit the 2022 and up Low Rider ST. Have you had any issues with it?
My LRST now had fwd controls installed, the stock bike still has the short mid controls linkage. If you have not installed the fwd control setup, it will not fit.
Ok. So I guess HD is just saying it doesn't fit the stock bike. I will be putting on forward controls so it shouldn't be an issue. Thanks for the info. Will be using your videos as an installation guide. Great stuff. Thanks again.
Love your work 👍🤓🇦🇺
Thank you Paul, I appreciate the comments and the support.
Ride Safe
let there be light..... bad ass brother nice video best period
Thanks brother, much appreciated!
Ride Safe!
Is there a way to have no strobe with the triple play?
Thanks for the question, looks like out of the 9 options for the triple play, option 7 is called a constant blaster x-pattern. I am guessing that is all 3 lights brightened.
Hope that helps, here is the link on the settings: www.customdynamics.com/media/wysiwyg/Modules/GEN-SMART-TPU-HD_3-pin-plugs-wpc_.pdf
Ride Safe
Just be aware not all Harley’s sold overseas (Australia) have the dual filament front turn signals, so the front LED’s won’t work.
Thanks for the info, I would hope that the local dealer or distributor would be able to guide buyers on what will and will not work for their specific application and location.
Ride safe
Did you have any issues with hyperflash indicator on the panel? I did this install and the lights don’t hyperflash but the indicator shows it is.
Great question. I did on my RGST, as well as the LRST. I think it’s a module affect. You could ask Custom Dynamics on the triple play part. The LED inserts alone did not show that behavior. They had a regulator for older models to stop that but didn’t apply here since the lights flashed properly. I just ignore the faster flash on the dash.
Ride safe.
Did you mount the triple play in the spot you said you were going to..?
Did it get in the way of the seat..?
I’m doing the install wanted to see if that was a good spot to mount it..
Thanks for the question. Yea, I did and it fit perfectly. Just grab a velcro roll off of Amazon and stick one side on the triple play and the other on the fender. I also tie wrapped the sloppy wiring up as well so it was clean.
Glad you are adding it, you will love it. Ride safe.
@@justkillnbugzok… thanks
And where did you hide those big white connectors..?
@@chg2799 You are very welcome, if you rewatch the video, at about 38:10 I show a pic of the finished attachment and where I put the connectors next to the side. Sits flush and does not interfere at all. Good luck and have fun!
@@justkillnbugzI just went back and watched it.. now I see what you did..
I sure do appreciate you making this video..
Thanks again…
Did you ever got an error code
Thanks for the follow up question, I did not have any codes get thrown up on the gauge, so that's great. I do however try to unplug the main fuse whenever working on anything electrical when possible to help avoid that chance (if I remember ;-)
Thanks again and ride safe!