Stock 572xp vs ported 372xp. How good have modern saws gotten?

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 พ.ย. 2024

ความคิดเห็น • 126

  • @mattgarcia2612
    @mattgarcia2612 ปีที่แล้ว +13

    I’ve been running my 572 with velocity stack and a ported muffler for over a year. Did the mods within days of first starting her. She runs a 32 in bar with a hand filed chisel chain and it will keep up with a 500i with similar mods all day. I absolutely love my 572. Such a good saw

  • @RC-ml3ne
    @RC-ml3ne ปีที่แล้ว +5

    I bought a 372 in a pawnshop nearly ten years ago. Amazingly, it was displayed with a slew of small homeowner saws and listed for $200! I guess they didn't know what they had...
    Anyway, this is a great saw and I love it! I do a lot of cutting in big hard wood including locust. This saw is a wood-eater.

    • @dannyhensley8306
      @dannyhensley8306 9 หลายเดือนก่อน

      You stole that thing man, lucky buy

  • @afleetcommand
    @afleetcommand ปีที่แล้ว +16

    Could not agree more about a 372 as a starting point. Really think you ran into what I did with the full wrap & 572. The bucking spike mod I did on the OEM bucking spike that comes with the full wrap kit changed the entire perception. That Bucking Spike Stock would bind the chain so I had to finesse a bit going into that smaller diameter wood ( less than 24 inch dia ). My "ported" 372 was way stronger in impression at first, but after the bucking spike mod I could just hog into the wood with my "Tweaked" 572....and then my cookie times dropped on the 572 . Of course mine is tweaked with a muffler mod and compression increase, but not worrying about stalling the chain in that smaller wood allowed me to be way more aggressive in the initial cut bucking and felling. Something to consider :)

  • @juicebox41
    @juicebox41 ปีที่แล้ว +3

    Opening up the muffler on the 5 series saws really awakens them up, and the auto tune is able to adjust to the changes.

  • @DeadWoodLogging6996
    @DeadWoodLogging6996 ปีที่แล้ว +5

    Wow! The throttle response on that 372 is simply insane !

  • @mpccenturion
    @mpccenturion 10 หลายเดือนก่อน +2

    I have a 572 - 2 days old - it is the best saw I have run in 50 yrs. Just MHO

  • @OzarkMidwest
    @OzarkMidwest ปีที่แล้ว +6

    Awesome video Tinman!!!! Can't wait for the next one. The throat on that 372 is insane, Harvey is a legend!!

    • @tinmanssaws
      @tinmanssaws  ปีที่แล้ว +3

      Hey buddy, you're a good man.

    • @OzarkMidwest
      @OzarkMidwest ปีที่แล้ว

      @@tinmanssaws I believe in ya friend

    • @tinmanssaws
      @tinmanssaws  ปีที่แล้ว +1

      @@OzarkMidwest thanks that means a lot!

    • @walkerscountrylife
      @walkerscountrylife ปีที่แล้ว +2

      Iron man is the man!

    • @Sandberg11390
      @Sandberg11390 ปีที่แล้ว +1

      Thanks for supporting this guy so he can keep bringing these great informative videos!!

  • @aaronpowell4885
    @aaronpowell4885 ปีที่แล้ว +3

    Great comparison! The 5 series huskies do seem to be darn stout out the box but there's just something about running older saws. Especially when ported!

  • @McCullochMac6
    @McCullochMac6 8 หลายเดือนก่อน +1

    Great video... That iron horse saw really rips up the wood...

  • @ernierichardson5494
    @ernierichardson5494 ปีที่แล้ว +19

    Put 10 tanks in to that 572, mine woke up after that

  • @willcarr5763
    @willcarr5763 ปีที่แล้ว +3

    Both great, still trying to get used to these new hipster doo-dad saws. I always reach for my 372's first as well but the 572 is actually faster there but has much more narrow power band so the 372 'feels' better due to the more forgiving power band.

  • @engineninjaChris
    @engineninjaChris ปีที่แล้ว +1

    The more I see you running and building 372's the more I want one. Maybe one of these days! Great comparison and honest opinions.

  • @backyardfirewood9852
    @backyardfirewood9852 ปีที่แล้ว +1

    Yeah; i went from Dolmar to the 572. You are spot on about the torque characteristic of the 572. If the chain was too aggressive it would fall on its face…. IMO, it was disappointing.
    I had mine ported and I asked the guy to focus on the torque over HP. Turned it into the saw I wanted…. I’ve cut a bunch of Ash w/ a 32” bar w/ full house chain no problem now…
    I’ve also had the Autotune firmware updated which I think helped a bit. Cut a bunch of Oak with it (24” b/c) and it goes through it easy…

  • @carlreape1190
    @carlreape1190 ปีที่แล้ว

    So glad you did this video! I’ve wondered where things fall in the real world! I have a 572 and I would be honored to own a Harvey saw. You are blessed to have both. Thank you for sharing, I always look forward to your posts.

  • @G.A.gigger
    @G.A.gigger ปีที่แล้ว +2

    Have pretty well always been a Husqvarna guy..Have run Stihls but just not for me ..Have run Jonsreds 930 when I was Cedar shake blocking and I did like those..now that I am 70 I like smooth and my 572 is that and more..for now my favourite ! I run it with a 24 skip tooth and 3/8s sprocket ...my spare is a 372xp with a 28 bar and same chain 3/8s skip tooth . For bigger stuff I will run the 372 but hard to beat the 572 for smooth ..love it..thanks for the informative video . Would love to try an Ironhorse mod saw too..lots of the fallers around here used to get their saws Walkerized...

  • @Fullchiselchainsawartistry
    @Fullchiselchainsawartistry ปีที่แล้ว +1

    That 372 is a monster! I’m waiting for the 572 port to see. Right now I’d take the 372 hands down😊

  • @thebradleysoncatbirdhill6849
    @thebradleysoncatbirdhill6849 ปีที่แล้ว

    Straightforward and honest comparison there! Well done!👍

  • @timfunk5084
    @timfunk5084 ปีที่แล้ว +3

    Just modified muffler on the 572 makes a huge difference in performance.

    • @mattgarcia2612
      @mattgarcia2612 ปีที่แล้ว +1

      Porting the muffler on my 572 coupled with a velocity stack and foam air filter really waked it up.

  • @nathanmcdonald1585
    @nathanmcdonald1585 ปีที่แล้ว

    Your doing a really great job on your video structure. Well thought out. Great video.

  • @markscott9426
    @markscott9426 11 หลายเดือนก่อน

    Just got a 372xp can’t wait to do some mods to it, 2004 and it’s in amazing condition, still has the carburetor caps on it

    • @FredsPenner
      @FredsPenner 4 หลายเดือนก่อน

      I bought mine in 2004 and it’s still running hard

  • @BobRossaroni
    @BobRossaroni 7 หลายเดือนก่อน

    I just picked up a 576 for $550, i felled 4 trees, limbed and bucked 5 the day after i got it. I put the 24 inch chain off my 550 on it and didnt cut any faster in the buck because of chainspeed and rakers but it doesn't bog down no matter how much you lean on it so im excited to try a 32-36 inch bar

  • @joshuasweet1532
    @joshuasweet1532 ปีที่แล้ว +1

    I love my 372 and it's awfully that you've got snow rite now... go Canada...from pa

  • @LeBlancfirewood
    @LeBlancfirewood 18 วันที่ผ่านมา

    Just found your channel and subscibed been cutting with a 576 for years i think it was the 1st auto tune started acting up ordered the 572 xp g

  • @stevetheriault4164
    @stevetheriault4164 ปีที่แล้ว +1

    BEEN WAITING FOR THIS ONE

  • @timg9448
    @timg9448 ปีที่แล้ว

    Nothing beats the fun factor you get from a little extra Grunt that comes from a ported saw and/or a good pipe.

  • @garyalexander2480
    @garyalexander2480 ปีที่แล้ว

    Yeah the stocker looked pretty damn good out the box

  • @2tallschainsaws305
    @2tallschainsaws305 ปีที่แล้ว +2

    Beautiful saws! You definitely need to port the 572. That Iron Horse saw is awesome! Can you show us a comparison video of the 576 vs 572?

  • @230e4
    @230e4 ปีที่แล้ว +4

    Power saws are fun! I went from running an 064 and a ms461 to a 572xp, the 572 felt really smooth and inviting as I broke it in on the firewood pile but when I took it to the woods to harvest hard maple, and red oak I really missed the torque of the 064, and 461. 5 years later and having run most of the 5 series, the 572 has been the best of those in terms of reliability and overall cost to run, the 592 the worst, which brings me to the moment when I was driving back from the dealer after having the 592 "fixed" for the umpteenth time I realized that saw was not fun, here set a saw I was so excited about in the beginning and in very short order I was having to force myself to take it out and cut with it. Yes it was a new saw with a warranty but I felt powerless to fix it myself, it has taken every bit of self constraint not to tear that saw apart and build it better or run over with my skidder. I have several friends that make a living with a saw that share the same experiences with other new model saws both Stihl and Husky. The 372xp is a saw one can easily build and grow with, it's popularity speaks to that. (Keep building it Husqvarna!) A properly sharpened chain is key always, but especially with the 572xp and also the Stihl ms462. Porting and muffler mods certainly help, they are both good saws but lack that certain appeal one gets from building and tuning a saw themselves, the journey of building, improving, feeling how a saw responds to you tuning the carb. That my friend will always be hard to trump in a side by side comparison for those that have experienced it. No doubt future generations will be telling this same story, comparing their new models to our current ones. The new saws have a place I gather, perhaps it is that they make one appreciate the virtues of the older ones. Whichever path you choose have fun with it.

    • @nikky3piece452
      @nikky3piece452 9 หลายเดือนก่อน +1

      Write a book FFS!!!

  • @ronaldbrown5745
    @ronaldbrown5745 ปีที่แล้ว +1

    When commenting on the Husqvarna 372 it would help to identify if it’s a pre X-TORQ or not.

  • @georgesmith5624
    @georgesmith5624 ปีที่แล้ว

    Yep that bore stroke combo of 372 044 stihl is kick arse,if you are lucky enough to have a play on a danarm 71ss these are the same and are light years ahead of what was around in the early 70's

  • @nayase7303
    @nayase7303 ปีที่แล้ว

    irons horse saw sounds wicked my vote

  • @jasonmercer9962
    @jasonmercer9962 ปีที่แล้ว +4

    The 572 needs a pipe or a muffler mod and it would keep up with the ported 372

  • @rubin123field
    @rubin123field ปีที่แล้ว +1

    awesome video idea!

  • @nateolmsted899
    @nateolmsted899 ปีที่แล้ว

    I love the channel man they’re both kick ass saws, but I would love to see some long-term testing put those things in some logger hands and let’s see how they hold up

  • @billblock3201
    @billblock3201 ปีที่แล้ว +2

    372 all day

  • @jamesmooney5348
    @jamesmooney5348 ปีที่แล้ว +1

    Very cool T man, very cool.

  • @lexiusnez6513
    @lexiusnez6513 ปีที่แล้ว

    Hey Tinnman,
    My 572xp does run through spark plugs a little faster than my 455 rancher.
    They use the exact same spark plug by the way.
    So stock up on them spark plugs.

  • @jokerplayz1229
    @jokerplayz1229 ปีที่แล้ว

    Awesome and informative videos Tinman. Got me a 272xp still looking for an original full wrap handle.

  • @stuartramage5933
    @stuartramage5933 ปีที่แล้ว

    your a good man tinman ,i wish you were not so far away so we could have a big hug ,peace an love stu

  • @antoniomorgado5304
    @antoniomorgado5304 ปีที่แล้ว

    oh yeah nice question and nice content!

  • @clintbliss2046
    @clintbliss2046 7 หลายเดือนก่อน

    I have a ported 272xp and it runs so good i can't imagine buying a new saw. After porting it felt twice as powerful. Very jumpy throttle response.

    • @FredsPenner
      @FredsPenner 4 หลายเดือนก่อน +1

      I haven’t run a 572 but ran both 372 and 272 and I miss my old 272 so I’m looking for another one now. 272 was way tougher and way less finicky than the 372.

  • @JS92GoW2
    @JS92GoW2 7 หลายเดือนก่อน +3

    Nice video, I'm from Sweden and I find the cultural differences very amusing when it comes to running these saws. You Americans always seem to want to run hysterically long bars compared to how we run them in their home country. Limbing with a 24 inch bar on 70cc saw makes everybody laugh here, I and many others do it with a 13-15 inch bar on a 346/550, and I wouldn't even consider running a longer bar than 20 inches on my 372/572. And you seem to prefer the XP over the XPG, here in Sweden the dealerships look at you with a strange face if you want the XP over the XPG. Anyway, nice video and nice saws!

    • @chrisgenever7002
      @chrisgenever7002 หลายเดือนก่อน

      Some people prefer limbing with a long bar to prevent bending. The heavier saw actually reduces back pain. I have back issues. I often run a short bar on a hot 346xp for limbing up high (I. E. Lots of small trees felled together while clearing) but run the big saw I fell with when limbing single large trees on the ground. Using lower body and pivoting makes the big saw lighter than the small saw without bending.
      BTW, you sound like an arrogant American with a lack of cultural competence. Be careful throwing rocks in a glass house.

    • @MotoLife541
      @MotoLife541 หลายเดือนก่อน

      What diameter and what types of wood do you mainly process over there?

  • @tdawg8605
    @tdawg8605 ปีที่แล้ว

    I like that 372. I'm betting that your boots are full of chips...😂. Nice video good feedback on the two saws. Cut two cords with the boy, his girl and the miss's today. It was hot 27°C. I'd rather cut in the late fall. Oh, and the ticks are out in full force. I think that it for the summer, time to shut-er-down till fall. TC Mahalo Tinman 🤙🤙🤙

  • @David-q2c2w
    @David-q2c2w 11 หลายเดือนก่อน

    I got a walkerized 372 , a walkerized ms200 , ,and a box of 2100cd parts for 300$ off rob ,a faller , rigger in squamish. I rememberhim saying, oh this saw screams .He was right . Gave it to my neighbor ... After another faller in ucluelet gifted two 390xp he didnt want. Both were a bit squished .but run
    Fine.I like the 390 or 288 or 266.easy to work on

    • @FredsPenner
      @FredsPenner 4 หลายเดือนก่อน

      I still reach for my 288 over my 372, it’s such a great saw

  • @ikesquirrel
    @ikesquirrel ปีที่แล้ว

    I love my 372 non xtorq. Everything a factory saw should be.

  • @jimgroulx3956
    @jimgroulx3956 ปีที่แล้ว +2

    Hey tinman……. Just wondering about life expectancy on a ported saw like that vs a quality stock saw. Thanks for the vid

  • @TheBikeMechanic
    @TheBikeMechanic ปีที่แล้ว +3

    "HArd" blue spruce! Hahaha.... that must be a relative "hardness" ratio!!

  • @stuartramage5933
    @stuartramage5933 ปีที่แล้ว

    tinman that saw is sweet ,music to my ears ,peace an love stu

  • @KriszFa
    @KriszFa ปีที่แล้ว +1

    next try the best! ms462 mtronic. absolute beast

  • @jackmulholland8537
    @jackmulholland8537 ปีที่แล้ว

    I know you said you wanted to port the 572, you should do a stock timing numbers build. Would be cool to see

  • @danielsmith-ze3wy
    @danielsmith-ze3wy ปีที่แล้ว +1

    Hi everyone hope everyone is having a blessed day

  • @leonardryan8723
    @leonardryan8723 ปีที่แล้ว

    Hello Tinman great work on chainsaw buddy .😊

  • @zachdavis1776
    @zachdavis1776 5 หลายเดือนก่อน

    I’d love to have a ported 372xp. I’m Guna buy one but not finding anything but the xtorque

    • @timfunk5084
      @timfunk5084 หลายเดือนก่อน

      They are only making the x torq .

  • @Z-Bart
    @Z-Bart ปีที่แล้ว +4

    One thing about Ironhorse's saw...it'll wake up the woods. Lol.

  • @wayneanderson991
    @wayneanderson991 ปีที่แล้ว

    Hi Tinman, nice comparison of two great saws. I know exactly what your experiencing with your 572 in regards to the torque. That was my only complaint with mine. I developed a pipe that took care of the lack of torque issue. These 572's will respond like the Dolmar's when you pipe them and get it right. I never had any luck with the common muffler mods you see done with the OEM muffler on the 572. Those mods get the heat out but don't add any power in my experience. Walts bucking spike mod does make working with the 572 more enjoyable.

    • @lexiusnez6513
      @lexiusnez6513 ปีที่แล้ว

      Did you build your own pipe for your 572xp?
      I have a 572xp and am looking for someone to build a pipe for it. I am also looking into buying a 585 and replacing the piston and cylinder with the 592 piston and cylinder. I realize it's more expensive than to buy a 592 but I'd rather be able to tune the saw myself.

    • @wayneanderson991
      @wayneanderson991 ปีที่แล้ว +1

      @@lexiusnez6513 Yes I built my own pipe. I don't build pipes to sell. There is a lot of time involved in building and testing a functional professional looking pipe for a work saw that makes power. The cost to build the pipe because of time would be cost prohibitive for most enthusiasts. I used to think that being able to tune my own saw was better, but after running auto tune saws for quite a while in various seasonal and just daily weather changes I don't think that way anymore.

    • @lexiusnez6513
      @lexiusnez6513 ปีที่แล้ว

      @@wayneanderson991 would it alright to ask for the specs of the pipe?
      I might be able to have a welder build the pipe for me.

    • @wayneanderson991
      @wayneanderson991 ปีที่แล้ว +1

      @@lexiusnez6513 I give up! I have tried to reply twice and my reply keeps getting taken down!

    • @lexiusnez6513
      @lexiusnez6513 ปีที่แล้ว

      @@wayneanderson991 wow that's wild yer reply get taken down

  • @billblock3201
    @billblock3201 ปีที่แล้ว

    I got one the iron horse is doing one for me I may get to use it one day lol

  • @billylee2312
    @billylee2312 ปีที่แล้ว +1

    I wouldn’t touch that 372. It’s probably my favorite you tube saw!!
    No offense to anyone that builds saws because I have much respect for all of you. I’m a stihl man myself but nice is nice!

    • @tinmanssaws
      @tinmanssaws  ปีที่แล้ว +2

      Oh it's good I agree

  • @jimhofoss9982
    @jimhofoss9982 ปีที่แล้ว

    I thought I’d “cheap out” and buy a husky 555, because mostly used for a firewood saw. I couldn’t justify getting a bigger husky, with the high prices….I’m really pleased with it, however. Starts in -40° temps and +30° in the summer, everytime. I’ve been using it to rough cut green 2x6x12ft spruce planks….and it does the job without complaint. I agree, the 5 series have come a long way in vibration mitigation. they are firm but smooth…no numb fingers after a pickup load of wood. cheers from northern BC!

  • @andreyvegele3726
    @andreyvegele3726 5 หลายเดือนก่อน

    Добрый день, у вас отличные бензопилы мощные 💪, а у меня тоже бензопила Husqvarna 576xp (73,5)куб. Я живу в Казахстане, дам ЛАЙК 👍

  • @hecticgerva1192
    @hecticgerva1192 ปีที่แล้ว

    I think they just made one for power and speed, but one just for torque due to the longer stroke.

  • @frankz1125
    @frankz1125 ปีที่แล้ว

    Id rather the Iron horse saw . Cheers

  • @fredpaquette2826
    @fredpaquette2826 17 วันที่ผ่านมา

    Nice video, i run a 550xp m2 whit port muffler 18inc bar it is a demon working in all day in the forest smaller saw whit big power for me is better and it is f#$fing sexy saw

  • @austindenotter19
    @austindenotter19 ปีที่แล้ว +6

    Apples and oranges. Mod the 572. Move to the future. Parts getting harder to find for older saws

    • @fabzacres-blackcat
      @fabzacres-blackcat ปีที่แล้ว

      I agree ☝️

    • @Holzplatz
      @Holzplatz ปีที่แล้ว +3

      The aftermarket is full of parts for the 372. That’s not the problem.

  • @itllkeal
    @itllkeal ปีที่แล้ว

    Thanks

  • @travisweldmaster7815
    @travisweldmaster7815 ปีที่แล้ว

    Im 5'7 roughly a 28 on a 372 is perfect for me

  • @josephgilmore2033
    @josephgilmore2033 ปีที่แล้ว

    I'd take the nodded 372xp Over newer saws any day.

  • @johanlarsson3644
    @johanlarsson3644 10 หลายเดือนก่อน

    How will a ported 572xp stand against the ported 372 ironhorse?

  • @jeremyfortune7274
    @jeremyfortune7274 11 หลายเดือนก่อน

    Will the 572 and other auto tune saws accept a muffler mod and reset? I’ve seen some that just will not get right after mods.. but some that seem ok. I just can’t see anything doing better than a 372, I’m just super biased

  • @joemiller7945
    @joemiller7945 3 หลายเดือนก่อน

    Tinman did you ever end up porting the 572?

  • @jasonreese4824
    @jasonreese4824 ปีที่แล้ว

    Got a question for you can a guy change the Chain speed with changing the drive sprocket.

  • @TreeTopVantage
    @TreeTopVantage 4 หลายเดือนก่อน

    Where can one get an ironhorse chainsaw?

  • @joshuasweet1532
    @joshuasweet1532 ปีที่แล้ว

    I love the 5 series saws but there kust getting too expensive

  • @bartonmd
    @bartonmd ปีที่แล้ว

    My ported 371xp is quite a bit faster than my 572 in smaller stuff, but my 572, especially with just a muffler mod and gasket delete, is better in bigger hardwood (which is 99% of what I cut), but even stock was as good or a hair better.

  • @ralphveasey7274
    @ralphveasey7274 ปีที่แล้ว

    Why limb with a big saw ? My Dolmar 5100s is my limbing saw, super light and super fast. I can maneuver it around super easy. For bucking I use my Makita 6401 or Husky 365.

    • @FredsPenner
      @FredsPenner 4 หลายเดือนก่อน +1

      I was only 13 limbing and bucking with a 272, it’s not a big saw at all

  • @Matt-d2e4e
    @Matt-d2e4e 10 หลายเดือนก่อน

    372 rules

  • @mrtennessee6862
    @mrtennessee6862 ปีที่แล้ว

    Maybe you could do a free raffle on the 576?

  • @Thefreemans-interesting-music
    @Thefreemans-interesting-music ปีที่แล้ว

    Ok say i port and polish a chainsaw and get a heap more power. Can i now throw on a longer bar and chain?

  • @scotttam7491
    @scotttam7491 ปีที่แล้ว +1

    Idk if this a fair comparison just because it’s a iron horse saw vs a stack saw
    You don’t have a stock ?372vs stock 572 that way you get a totally fair comparison I would hope a ported saw of the same size would beat a non ported saw if it didn’t it tell you that the port job was useless

  • @jasonfountain6024
    @jasonfountain6024 ปีที่แล้ว

    Tinman, what’s happening man? Listen I got a 572xp I have no clue what happened to it. I’m in New York I had a tree service job to remove a 38” maple. Anyway I dropped the tree, limbed it up, started buckin cut some large rounds off. Ripped them
    Into quarters shit saw off loaded truck fueled saw back up. Wouldn’t start, have spark getting fuel, compression seems low. Think I popped it. You wanna build a 572? I want some numbers and what not. Let’s exchange emails see what we can come up with.

  • @kevinbranham1284
    @kevinbranham1284 ปีที่แล้ว

    What's your take on the solo 651sp, trying to convert to3/8 from .325 need to find new clutch drum any idea's to find one

    • @tinmanssaws
      @tinmanssaws  ปีที่แล้ว

      Never seen or worked on a solo here.

    • @crxlsvtecboosted
      @crxlsvtecboosted 11 หลายเดือนก่อน

      its a 4hp saw throwing full size 3/8 on it is just gonna slow it down way too much. i ran a 3/8 20" on a 261 about the same power and the saw was a dog. filed the teeth down so the rakers were at 10 thousandths and it was like i had .325 on it again but slower. just run .325 and file the chain proper and she'll rip. ive gotten into diggin out the tooth real hard and square filing it.

  • @longbar105d
    @longbar105d ปีที่แล้ว

    👍

  • @larrybollinger7319
    @larrybollinger7319 ปีที่แล้ว

    What size tygon did you say in another video for a 268xp.

    • @tinmanssaws
      @tinmanssaws  ปีที่แล้ว

      I use oem lines on 268s

  • @vascopires2045
    @vascopires2045 ปีที่แล้ว +1

    The 372 sounds better meatier

  • @Matt-416
    @Matt-416 9 หลายเดือนก่อน

    I don't understand why Husky went with a long-stroke/small-bore, sealed crank bearings, one-piece muffler design choice.
    The weight is what gets me...
    Remember when the Stihl 461 came out and all the 372xp guys laughed at it for its size and weight? It was bastardized as being "bloated" or "chubby" and the power increase is irrelevant to the weight and handling of a 70cc class saw?
    Strange that now those same 372xp guys are suddenly oddly quiet about the reality of the 572 compared to the 462.
    Heck, even the 500i is lighter and its in a larger displacement class.
    Husqvarna really dropped the ball with the 572.
    Its still a phenomenal machine. I'm in no way implying that it isn't. But when compared to its predecessor, and its current competition... Ouch. What happened?

  • @vascopires2045
    @vascopires2045 ปีที่แล้ว

    Question since you mentioned you ported lots of 026’s what do you use for numbers I’m trying to build a torquer any help would be appreciated keep up the great vids Ps speaking of fuel consumption my 357 seems like it goes forever on a tank

  • @billbertagnoli4226
    @billbertagnoli4226 2 วันที่ผ่านมา

    Become. " How good have they
    Become".

  • @Topnotchbeing1327
    @Topnotchbeing1327 ปีที่แล้ว

    Husqvarna, the best chainsaw in the universe

  • @ronsilva516
    @ronsilva516 ปีที่แล้ว

    Port it and a muffler mod then see what happens can’t hurt

  • @spcm2
    @spcm2 ปีที่แล้ว

    One doubt: that 372XP is the original or the X-Torq?

  • @LeBlancfirewood
    @LeBlancfirewood 18 วันที่ผ่านมา

    Wow i got mine for 1050 us dollars

  • @jaydee2620
    @jaydee2620 ปีที่แล้ว

    Big saws for little wood 😂

  • @pavelkysa9907
    @pavelkysa9907 ปีที่แล้ว

    🐲🐲🐉🐉🌳🌳🌲🌲😉😉♥️♥️💪💪💪💪 lesu zdar

  • @chrisgenever7002
    @chrisgenever7002 หลายเดือนก่อน

    I REFUSE to own anything I can not repair due to manufacturer or governmental refusal to end user access of necessary software. 572 is garbage for that reason alone. I will buy Chinese copies before I buy a 500 series saw. And that is what I did while I rebuild my 372.

  • @bornforfreetaxtothedeath..7542
    @bornforfreetaxtothedeath..7542 2 หลายเดือนก่อน

    Why everyone wants to have Formula 1 chainsaw?
    Thats all seems people care now days... 🙂
    I prefer reliability, bulletproof build, chainsaw that will last long, long time, a truly work horse chainsaw, instead off fast formula 1 chainsaw...
    Tinman u have spoil for choice😅😂, different chainsaw for different day off the week...