How do I get hold if you sir. Golf mk3 overheat , Changed water pump, rediator , water bottle , top cylinder reconditioned. All that needs to be fixed to clear the overheating. But somehow the mechanical side might be wrong. In need of help. GS 1.6 Carb.
Thank you for supporting my channel with your visit and interaction Delilah, it really means a lot and helps to build the channel, I am based in Cape Town, Southern Suburbs (Diep River) 0724867810 call or Whatsapp.
Thank you for sharing , sir my Np200 leaks oils, it was overheating and mixing oil with water. So my mechanic advised me to not drive it anymore until it's fixed as this could damage the engen. The mechanic did what he could to fix it but now the oil leaks .Please help.
Hi Percy, one has to do a proper job to repair such a problem permanently, it sometimes requires to completely overhaul the engine with all new internal parts, especially when a car has overheated.
Thanks for the share, my np200 Dci K9KM, 2012 modal engine is bursted and i'm thinking of replacing it with a Renault Clio 2 engine. Are the two engines compatible or should i change the transmission as well?
Did you start your patreon page? Is there a link? This is great and very detailed with great tips one wouldn't know about. Where do you suggest the best place to get the parts for a np200? Oil filter removal tool, also best place for that please?
The best way Dirk, is to remove the No.1 spark plug and put a long screwdriver in the plughole while you turn the crank by hand with a spanner or socket, this way you will see when the screwdriver hits the topmost point, just before it goes down again, this will be TDC.
Under the Cubby Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Hello, I live far away from a Nissan dealership but want to do the oil change. Its recommended that the sump plug washer gets replaced. Not sure if its fibre, aluminium or copper etc. Midas have different types so hoping to get correct dimensions. Any suggestions? Thank you
Hi sir can you please assist. How do i know which fuse is the right one for my radio- nissan NP200,2016 model.my Radio just died .it won't come one. On the diagram it doesn't show the fuse numbers(size)
I have a problem with my Cabin air filter I think it's stuffed with something and I can't use my aircorn the moment I switch it stuff starts flying out my vents how can I fix this and where is the filter located
@@vehiclemaintenanceandrepai3790 thank you very much, that's a relief.. The reason for my question is because I took a car for service, now it misfire because some times it has a small vibration/shaking when driving.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE. Gary De La Cruz
Not suprising as the same engine package is used in the Sandero, making the assembly plant keep a common engine for both models is a lot cheaper, especially as then they can change production volumes easily on the lines. Nice vehicles though I prefer the old Nissan 1400, which is a very reliable vehicle, and very easy to maintain as well.
Hey Sean I can not agree with you more but with one exception, those Nissan 1400 bakkies were mechanical marvels but on a quiet night in summer you could hear them rust, Hahaha.........
@@vehiclemaintenanceandrepai3790 The one at where I used to work was called "Rust In Motion" for a reason... But I was able to panel beat it back into shape after an accident using very few tools, just a hammer, spanners and pulling the panels back into position. But the engine itself was never a problem, even though the radiator at one point was just cores and no fins, it just kept on going. Service was literally a hour, more the walk to the spares shop to get the parts while the oil was draining out of the sump. Yes it was rusting, but what do you expect from a vehicle assembled on the Highveldt, and with no other corrosion protection other than the primer and first coat of paint, plus with all those cavities that pooled water. Tectyl helped a lot, but still they rust. the good looking one you see these days are just an example of how well can you hide the body putty, though yes you can buy the entire vehicle as panels quite cheaply, which i have done for another, where we replaced the rear panels, as they were more hole than panel.
HI there i would start a patrion page if i was you my friend here in Australia as a car panel beater and spray painting Chennel and he just started up one and he is now makeing much better videos
I have one and it’s little monster. I learned how to work on a vehicle on it. Timing belt was the first, water pump 🙄 , lights, ICV, suspension. My first ever vehicle, never been handled by another person and it’s 9 years old this year, bought it brand new. Very easy n cheap to maintain.
Thanks for supporting my channel with your visit, Ntandazo, and sharing your experience about your Np200, just goes to show it is not a bad vehicle at all.
@@drevil2783 the tricky thing about buying a second hand car is that you never really know what has been serviced and what hasn't been, but preventative maintenance is very essential in that situation. When i buy a second hand car i do a major service including all fluids , belts, etc and take it to an expert like Gary for a thorough check up. It's this proactive approach that has ensured that I'm never stuck on the side of the road and i travel quite a bit. The Nissan NP200 is actually a very good bakkie, it's very reliable and fuel efficient as long as you take care of it.
![[UNCUT]"ทนายตั้ม" แฉยับ! ความลับสวรรค์ ใครคือ "บิ๊กเทวดา" ของบอสพอล l คนดังนั่งเคลียร์ l 15 ต.ค. 67](http://i.ytimg.com/vi/ru9fpSaUwdA/mqdefault.jpg)
Great videos...please do more Nissan NP200 vids like water pump and clutch replacement videos
Thanks for your support I will try to satisfy your request.
Thermostat too
Thank you for this video it really helped a lot . Is there a way to remove the oil pan without removing the whole engine ?
Yes, it could be removed without taking out the engine.
Thank you been looking for info on my np200 so long and couldn't find any before now.
Thanks for your support, Mark feel free to browse my channel as there are a few NP200 videos here.
Thank you Gary 😊
Where is your workshop located
Another lovely video Garry....cant wait for more citigolf videos
Thanks for your continued support Sathasivan, glad to know one's efforts are appreciated.
@@vehiclemaintenanceandrepai3790 will always be appreciated.....thanks for the great honest and informative content....stay blessed
Yes start a patreon page. I will contribute👍👏👌
Once you are set up properly you can even do some part and or tool reviews???
Thanks for the vote of confidence, those tool reviews are in the making....... coming soon.
How do I get hold if you sir.
Golf mk3 overheat ,
Changed water pump, rediator , water bottle , top cylinder reconditioned. All that needs to be fixed to clear the overheating. But somehow the mechanical side might be wrong. In need of help. GS 1.6 Carb.
I am based in Cape Town, WhatsApp 0724867810.
Extremely helpful video. I will get started on my bakkie tomorrow
Thanks for your support Katlehe, best of luck man.
You are absolutely so talented.whereabouts are you i own a nissan and would like to have you do my service.
Thank you for supporting my channel with your visit and interaction Delilah, it really means a lot and helps to build the channel, I am based in Cape Town, Southern Suburbs (Diep River) 0724867810 call or Whatsapp.
thank you Garry u have saved me alot of money
Thank you for sharing , sir my Np200 leaks oils, it was overheating and mixing oil with water. So my mechanic advised me to not drive it anymore until it's fixed as this could damage the engen. The mechanic did what he could to fix it but now the oil leaks .Please help.
Hi Percy, one has to do a proper job to repair such a problem permanently, it sometimes requires to completely overhaul the engine with all new internal parts, especially when a car has overheated.
@@vehiclemaintenanceandrepai3790thank you so much sir. I will certainly consider.
Thanks for the share,
my np200 Dci K9KM, 2012 modal engine is bursted and i'm thinking of replacing it with a Renault Clio 2 engine.
Are the two engines compatible or should i change the transmission as well?
I have never done a job like this so I cannot advise correctly, I am sorry Chileshe.
Did you start your patreon page? Is there a link?
This is great and very detailed with great tips one wouldn't know about.
Where do you suggest the best place to get the parts for a np200? Oil filter removal tool, also best place for that please?
Hi Rory, I decided to hold off on the Patreon page for now, oil filter removal tools can be had at most Midas outlets. Glad you like the channel.
Another useful video. How to I get TDC on this engine without the timing belt marks
The best way Dirk, is to remove the No.1 spark plug and put a long screwdriver in the plughole while you turn the crank by hand with a spanner or socket, this way you will see when the screwdriver hits the topmost point, just before it goes down again, this will be TDC.
I'm a bit baffled, why use thread tape when using a new washer.
Are there issues with oil leaks on these sump plugs?
Just a little extra insurance, Lucio, one of those just in case scenarios, "rather safe than sorry".
Thank you very much.where can I change the aircon filter.please.
Under the Cubby
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Thanks, very helpfull! Now i have the confidence I needed to do it myself :)
Nice video there... there's a veering type of sound on my np200 engine, what could it possibly be??
Check the fan belt for wear or adjustment.
Hello, I live far away from a Nissan dealership but want to do the oil change.
Its recommended that the sump plug washer gets replaced.
Not sure if its fibre, aluminium or copper etc.
Midas have different types so hoping to get correct dimensions.
Any suggestions?
Thank you
Copper is best, take along the sump plug to get the correct washer. Good Luck, and thanks for supporting my channel.
Thank you It is very helpful, yes go on with what you doing.
Thanks for the support, Joseph, it means a lot to me and helps to grow my channel too.
Hi I wanted to know if you can put a np200 engine together and put it in?
Thanks for the video, what oil do you recommend for NP200 petrol?
15w40 engine oil is recommended in a moderate climate, Lucio
12:58
Thanks, Nissan say they use ELf 5W 30 fully synthetic,thats pricy!
That is overkill, no oil quality can replace regular oil change intervals.
@@vehiclemaintenanceandrepai3790 I agree, I only do around 8000km per year, cant afford the petrol🤣.
So I will change the oil yearly.
I feel this father-son bond... 😭❤️.. can you plz add more NP200 videos plz 😭❤️... anything that can be done on the car plz 😭
When the NP200 comes in I will film all procedures done.
Hi sir can you please assist. How do i know which fuse is the right one for my radio- nissan NP200,2016 model.my Radio just died .it won't come one. On the diagram it doesn't show the fuse numbers(size)
Hi Gary.
Yes for the patreon page.
I will subscribe.
Thanks for the response Dharmesh.
I have a problem with my Cabin air filter I think it's stuffed with something and I can't use my aircorn the moment I switch it stuff starts flying out my vents how can I fix this and where is the filter located
Thank you. Absolutely brilliant video.
Keep up the good work. 👍
Thank you for supporting my channel.
Hi. Do you have a video of how to drain and refill the transmission oil on this car?
Somewhere in the library Monre, you have to search for it.
Thanks
Did you add some oil in the new oil filter?
No, it was not necessary, but I did lubricate the seal on the oil filter, Simeon.
Excellent video .Thanks a Million.❤
I am glad you found the video useful, thanks for supporting my channel with your visit.
Any idea on how to repair orfind a leak on the np200 power steering. Thanks
You have to jack up the vehicle and do a visual inspection.
Hello Gary. Waar is die cabin air filter op die np200? My bakkie stink verskriklik binne.
Behind the cubby
@@vehiclemaintenanceandrepai3790 baie dankie.
@@eurafrican85 PLESIER
Help me here. My NP200 reaches 4000 rpm when I get to 120kph. What must be the problem?
Slipping clutch
what is the size of the sump plug spanner/socket
Baie dankie vir die video
It is a pleasure I hope it helped you out, thanks for supporting my channel with your visit.
Hi, What will happen if I put in 3.5L of oil in the engine? what impact will it have on the vehicle?
I do not think it will have a negative effect on the engine, Motlalentoa.
@@vehiclemaintenanceandrepai3790 thank you very much, that's a relief.. The reason for my question is because I took a car for service, now it misfire because some times it has a small vibration/shaking when driving.
Check the HT leads and coil pack, Motlalentoa, it is the most common cause for misfires on these cars.
Is necessary to remove the cover plate?
Yes, Ntandazo, it makes the job easier and you do not mess oil on it.
Thank you Sir this was very helpful 👌🏿🙏🏿
Thanks for the support, Jabu this is why I make these videos.
Thank you Sir.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Gary De La Cruz
Not suprising as the same engine package is used in the Sandero, making the assembly plant keep a common engine for both models is a lot cheaper, especially as then they can change production volumes easily on the lines. Nice vehicles though I prefer the old Nissan 1400, which is a very reliable vehicle, and very easy to maintain as well.
Hey Sean I can not agree with you more but with one exception, those Nissan 1400 bakkies were mechanical marvels but on a quiet night in summer you could hear them rust, Hahaha.........
@@vehiclemaintenanceandrepai3790 The one at where I used to work was called "Rust In Motion" for a reason... But I was able to panel beat it back into shape after an accident using very few tools, just a hammer, spanners and pulling the panels back into position. But the engine itself was never a problem, even though the radiator at one point was just cores and no fins, it just kept on going. Service was literally a hour, more the walk to the spares shop to get the parts while the oil was draining out of the sump. Yes it was rusting, but what do you expect from a vehicle assembled on the Highveldt, and with no other corrosion protection other than the primer and first coat of paint, plus with all those cavities that pooled water.
Tectyl helped a lot, but still they rust. the good looking one you see these days are just an example of how well can you hide the body putty, though yes you can buy the entire vehicle as panels quite cheaply, which i have done for another, where we replaced the rear panels, as they were more hole than panel.
@@SeanBZA Rust in motion... LOL :D
Wonderful.
Thanks for supporting my channel with your visit.
My np200 doesn't want to engage reverse gear and it has bad engine running sound
Best to have an experienced mechanic check it for you Kgagara, it does not sound like a common problem on the Np200.
Nice
Gary go for patreon. help you to help us. Nice info on video. keep it up and keep safe, from one SA member to the other SA member.
Thanks, Dawie for that positive answer.
HI there i would start a patrion page if i was you my friend here in Australia as a car panel beater and spray painting Chennel and he just started up one and he is now makeing much better videos
Thanks for your positive feedback, John it is greatly valued appreciated.
@@vehiclemaintenanceandrepai3790 no problem let us know when its ready thanks
Yes
Oh Yes
Dorhedel don't not open pls help please help me a door handle to
???????????????????????????????????
i had no idea there was a trip OD
Glad you found out.
🙏🏽🙏🏽🙏🏽
I am glad you liked it
Please please please open the Page.
Thanks for your positive answer Ntandazo.
I would say throw that bash plate away and then do the same with the whole car 😆😆
It is actually not a bad vehicle once you get over the stigma's, not expensive to maintain, fuel efficient and pretty simple to work on.
I have one and it’s little monster. I learned how to work on a vehicle on it. Timing belt was the first, water pump 🙄 , lights, ICV, suspension. My first ever vehicle, never been handled by another person and it’s 9 years old this year, bought it brand new. Very easy n cheap to maintain.
Thanks for supporting my channel with your visit, Ntandazo, and sharing your experience about your Np200, just goes to show it is not a bad vehicle at all.
@@ntandazosogoni6952 if you bought it brand new then you stand a chance but second hand it's an endless money pit.
@@drevil2783 the tricky thing about buying a second hand car is that you never really know what has been serviced and what hasn't been, but preventative maintenance is very essential in that situation. When i buy a second hand car i do a major service including all fluids , belts, etc and take it to an expert like Gary for a thorough check up. It's this proactive approach that has ensured that I'm never stuck on the side of the road and i travel quite a bit. The Nissan NP200 is actually a very good bakkie, it's very reliable and fuel efficient as long as you take care of it.