Great video oom Gary! Thank you for using your time and effort to make these very helpful videos for all of us at home! You are saving your subscribers thousands of rand🙏🏻 Keep it up oom! I would love to see a video on adjusting the drum brakes on one of these Np200's.. I know you explained how but a video will be awesome to see as well! Keep up the awesome videos oom Gary👏💪🏻
I would like to know about the hand break cable on a Nissan NP200 . The cables have come loose at the hand brake leaver and I don`t know where it could have broken or come loose between the lever and the rear wheel . I appreciate your help and the great videos you post on You Tube . Thank you kindly .
It is self-adjusting except for the hand brake cable. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
When the brakes is finished you will hear bad sound when you brake.when the hand brake does not function it means that the layer on the braking shoes is thin now you will require to adjust the braking shoes bolt.
Sir very good video..can I ask you something..I own a subaru 2002 model..the car was driving fine..then I didn't drive it for 9 months..it was standing without feel..I filled with feel now it cranks but won't start.please advise me sir.thanks
Hi, thanks for supporting my channel with your visit, it sounds like there may be air in the fuel system that needs to be bled out, or the injector tips are corroded and needs cleaning.
Check if it has a bleed nipple on the injector rod if so get someone to crank while you open the nipple until all the air is out, if it does not have a bleed nipple then it is best to consult a Mechanic familiar with Subaru
Hi Gary, I have the 1.6, 16 valve model of the NP200. In the morning when I start her, she "hunts" while the engine is cold, once warm, then it stops. What is cause of this?
My np200 hand brake is very high and it looks like the adjusting size ten nut is all the way down at the hand brake itself. Is there only one place to adjust the hand brake? Does the hand brake have any adjustment at the brake drum? If not my cable is streched.
@@vehiclemaintenanceandrepai3790 Thanks that worked. It wasn't adjusting automatically. Had to remove the brake drum and adjust manually. Handbrake self adjusted to three clicks now from 13 clicks.
This video doesn't show how to adjust the adjusting wheel. It is just telling but not showing. Is it up or down? Where is up where is down? Is it clockwise or anti-clockwise? Mine is not turning at all. What to do?
No, the lever will scrape against the backing plate and the handbrake will not function correctly if fitted facing inward. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE. Gary De La Cruz
Thanks for supporting my channel with your visit Renier, I am happy you found value in my video, feel free to browse my channel for more useful repair videos. Gary
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Hierdie toppie jinge!!! Baie dankie vir jou deeglikheid en kennis
Dit is a groot plesier om te kan help, dankie vir jou ondersteunning, ek wardeur dit baaie
One man bleeding system; brilliant idea!!. I would never have thought of that.. thx for sharing Gary
And it hardly cost anything Nico. Gary
Great video oom Gary! Thank you for using your time and effort to make these very helpful videos for all of us at home! You are saving your subscribers thousands of rand🙏🏻 Keep it up oom!
I would love to see a video on adjusting the drum brakes on one of these Np200's.. I know you explained how but a video will be awesome to see as well!
Keep up the awesome videos oom Gary👏💪🏻
I would like to know about the hand break cable on a Nissan NP200 . The cables have come loose at the hand brake leaver and I don`t know where it could have broken or come loose between the lever and the rear wheel . I appreciate your help and the great videos you post on You Tube . Thank you kindly .
it sounds like the cable is excessively stretched and may need replacing, but try adjusting 1st.
Good presentation. The actual adjustment needs to be shown
It is self-adjusting except for the hand brake cable.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Very clear video. Thank u. God bless
Always a pleasure, Thanks for supporting my channel with your visit
Very informative video. Any advice on removing the brake when the adjustment wheel is stuck and does not want to turn?
Adjust the hand brake all the way down, remove the drum, then remove the adjustor and loosen it by spraying some loosening fluid on the adjustor.
@@vehiclemaintenanceandrepai3790 Thank you, I will give that a shot
Good Luck
Thank you Gary.
I noticed there is no split pin to secure the large nut on the hub.
Would that not unscrew itself ?
no
How do you know if the brake shoes is finished or damaged? I'm asking because my hand brake doesn't work so I'm not sure what's the problem🤷♂️
The rear drums need to be removed and a visual inspection must be carried out, it could just be an adjustment or a seized cable.
When the brakes is finished you will hear bad sound when you brake.when the hand brake does not function it means that the layer on the braking shoes is thin now you will require to adjust the braking shoes bolt.
Sir very good video..can I ask you something..I own a subaru 2002 model..the car was driving fine..then I didn't drive it for 9 months..it was standing without feel..I filled with feel now it cranks but won't start.please advise me sir.thanks
Hi, thanks for supporting my channel with your visit, it sounds like there may be air in the fuel system that needs to be bled out, or the injector tips are corroded and needs cleaning.
@@vehiclemaintenanceandrepai3790 thanks for the reply..so how do I bleed the system..or can only a professional do it.
Check if it has a bleed nipple on the injector rod if so get someone to crank while you open the nipple until all the air is out, if it does not have a bleed nipple then it is best to consult a Mechanic familiar with Subaru
You’re a God sent.🙏🏾
Very informative, thanks for sharing
Thanks for supporting my channel with your visit John.
Hi Gary, I have the 1.6, 16 valve model of the NP200. In the morning when I start her, she "hunts" while the engine is cold, once warm, then it stops. What is cause of this?
The throttle body needs cleaning, remove the air filter housing, clean the intake of the throttle body, and use carb cleaner.
Hi Gary, please share the Engine mountings of that car when u get a chance please.
My np200 hand brake is very high and it looks like the adjusting size ten nut is all the way down at the hand brake itself. Is there only one place to adjust the hand brake? Does the hand brake have any adjustment at the brake drum? If not my cable is streched.
One needs to adjust the foot brake 1st then the hand brake.
@@vehiclemaintenanceandrepai3790 Thanks that worked. It wasn't adjusting automatically. Had to remove the brake drum and adjust manually. Handbrake self adjusted to three clicks now from 13 clicks.
Great, this happens often.
Thank you..very informative
This video doesn't show how to adjust the adjusting wheel. It is just telling but not showing. Is it up or down? Where is up where is down? Is it clockwise or anti-clockwise? Mine is not turning at all. What to do?
Shouldn't the lining with the handbrake cable lever face inwards..
No, the lever will scrape against the backing plate and the handbrake will not function correctly if fitted facing inward.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Gary De La Cruz
I have np200 it Doesn't engage reverse gear
Thank you very much!!
Thanks for supporting my channel with your visit Renier, I am happy you found value in my video, feel free to browse my channel for more useful repair videos.
Gary
Nice
Exelant
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Thanks a million BAIE DANKIE (Buy a donkie)lol
Thanks for the support Adam, glad you liked it, sorry man sold the last one (Donkie) Lol