Have about 10 hours on my 2021 se 300 factory and +1 on the poor plastics. Love every single thing about the bike except the plastics, they seem to stain easy, i ride dusty dry trails often and there is some discoloration on the white plastics from my pants rubbing. They are also expensive to replace, but if that's the worst thing about the bike I'll freaking take it. Also, a little something I did was before I had even ridden the bike I took some griptape, cut it, and put it on the frame guards above the pegs, it keeps they from getting scratched up (like every other sherco I've seen) and helps just a little bit to keep my boot from sliding up. I would definitely recommend that as well as getting some clear gorilla tape and putting it under the frame guards/under the skid plate to ensure the paint doesn't wear off. Best bike I've ever ridden, rode with some guys who have beta's, huskies, ktm's, and they all preferred this bike to the TPI. The sherco is so much smoother in the power band it's crazy.
Hi Greg. I really enjoy your content and always look forward to fresh uploads. I ride the same areas as you on a 2020 Beta 390. I would be very curious to get your take on that bike and would be happy to let you ride it for a review. Let me know if you're interested. Thanks again for the great content.
It's a freaking dream. I love mine. Most fun bike i've ever owned. Glad I'm not the only one with poor fitting plastics. Also hit neutral at the crappiest times! Then it's sometimes hard to find it on steep downhills as well... weird.
Good review. Two things I found out after riding my 2020 for about a year now. Air Filter: I saw a video from Factory Sherco rep about how to do the filter. If you rotate it 1/4 turn to the left it will come our pretty easy. (with the flat side toward the subframe) I was surprised how much easier that was on me and the filter lol. On the plastic tank shroud. Hard to describe. It took me a few times to figure out to put the bottom tabs of the shroud into the slots and get that good and tight seam then worry about the top by the tank. Can get mine near perfect if I do the seam first and get the tabs aligned and gap tight and then put top of shroud on screws on tank. I was doing it backward, the top first getting a screw in the tank and then could never get that gap to go away like you show in the video. Work on seam first. Agree they plastics could be a bit more durable and standard $$$, Most fun ride I have ever had or ridden for sure and I have had a few ridden MANY.
Nice to see honest feedback on the bad stuff. The counterbalance issue, I don't know how you can call it a win when it still vibrates a lot. Saying it has more power because they didn't add the amount of weight they should have? That logic isn't very good IMO. The casings look identical to the china two stroke, I can't get past that point myself.
@@gregjohnson8285 I’ve heard great things. I love my ktm, but I want to try a Sherco. Everyone loves them it seems and they’re gaining hella traction in the States for sure.
Excellent review mate, Ill add a few points having put 30 hours on mine: - Plastics imo hold up better than on my last 2 bikes (Betas) but I have noticed the tank shroud doesn't quite fit - exactly like yours. - Bolts, havent been an issue for me. I don't use torx, they hold water and end up looking ordinary growing surface rust. - Footpegs, took some getting used to but they reward a rider standing more on the ball of your foot. - Dash/Speedo actually works and holds time, unlike both my previous Betas. Kinda odd as they are all Trailtech. Beta wiring maybe the issue? - KYB = awesome. totally agree with you. - Chain guide.. I will replace mine, thanks for the tip. - Break pedal, same. previous bikes i had the large tip. not needed on the Sherco If I think of anything else Ill add it.
@Rider SC thanks for sharing. Yes the Beta plastics seem to be the most prone to breaking/cracking. Beta fixed the speedo issue for 2021, it was the mount causing the cable to not stay connected or so I'm told.
The subframe looks nice new but like this bike in the video, it is really thrashed, bare alum on kaw honda yamaha can get terrible looking too, but not usually after 40 hrs plus you can polish them out, having to stick no slip strips on it is not the best solution, then the finished subframe is hidden lol, I would only use the 'strips' if I wanted the grip. I wouldn't go with Torx either, allen/hex bolts work well.
Awesome review!!! All good points on the pluses and minuses. I did the opposite of yourself I started with a 2018 shreco 300 and now I'm on a 2021 husky te300i. I liked the sherco but man I really love this 300 husky!!!! But in saying that I would never rule out a new model sherco down the road. I still have yet to sample the KYB suspension
Great video, I had a Beta and it used to hit neutral a LOT, played around with different oils and viscosities, tried 5 different types, ended up with Motul 10/60 100% synthetic, (as apposed to full synth, there is a difference !) and that fixed the problem. Now have a 2020 KTM 300, did the same test, ended up with the stock Moterex 15/50. I know it sounds like BS, but oils can make a big difference, imho :-)
PNW, some good valid points there, some not so much in my opinion. Definitely 100% agree with the fun factor + ! 1/ The plastic fitment issue has been raised with the factory in France and it is due to the fuel tank not seating in the frame properly. Have a look at the frame paint under the tank and you note a rub mark where it's pressed hard on the bottom of the tank. Sherco even deleted the rear tank bolt because it was nearly impossible to install 😒 2/ The bolts.... I love that they aren't Torx, as a mechanic I don't like them personally. I already carry sockets and spanners in my pack, needing to carry a Torx set as well is more weight. 3/ KYBs are the bomb, really great on mine at 53hrs, will have them serviced soon. 4/ On the plastics being brittle, none of the 3 bikes I've owned have cracked anything plastic including the 21 model. They're made by Polisport for Sherco the same as other brands 🤷♂️ 5/ The air filter is my biggest annoyance, it's a terrible design - agreed. It would be impossible to change quickly in a race without dumping dirt down the intake and you're never sure it is seated without removing a side panel. 6/ One you missed is the crazy fuel tap location. I just leave mine on 24/7 and deal with the fumes in the garage rather than stuff my hand in there 🙂
@@PNWEnduro Maybe 🤷♂️ Perhaps it's because it's colder where you ride too. Typically at least 15C where we ride and often up to 30C. Sherco did make the plastics more flexible in 2017 after being board-stiff prior to that. I have a white 'plastic bruuse' where you pointed to your front mudguard, mine hit a tree and flexed back. At least they're cheap to buy at $50 🙂👌 Roll it on and enjoy!
I couldn't agree anymore with your plus five and minus five. I do wish Sherco would go through the effort to make the gas tank / plastics fit properly. In addition it would be nice if they would allow some aftermarket companies to make replacement plastics that aren't so brittle
Good review Greg,thanks for putting it together. How are you finding the fuel consumption now that you have the Smart Carb? My only complaint with my 2021 is the amount of fuel I go through and the chance of running out.
I'm pretty sure it's the tanks. They just have too much variation between them. All it would take is better tolerance for mounting the plastics, a little more wiggle room.
@@MDHaughton I agree 100% that it's the tanks. In comparing three identical bikes side by side the tanks all fit different. It may even be noticed that there's a hole in the tank that's supposed to line up with a bolt hole in the frame and they do not line up. This issue can even affect the way the seat fits
Do you have a scale to weigh it? Just wondering what it actually weighs ready to ride. And the price always seemed high to me compared to ktm that has a pretty expensive efi system compared to carbs. Good video.
I'd like to get a scale eventually but they are quite expensive. Where I live the factory edition costs about the same as the base level KTM. Sure no efi system but you get full KYB suspension, fan, skid plate and gnarly pipe stock on the Sherco.
Not had any issues with accidentally putting the bike in neutral at all on my 2021 300 SE Factory. In fact, I have to be very intentional to get it into neutral. Plastic fitment is good on mine as well (not that it makes any difference in how it performs). I agree that the airbox is tight. Should be able to remove and install the filter without it dragging the sides of the subframe, but there just isn't room on this bike. Also agree that vibration is NOT a factor at all. Never notice it. Love the map switch and how easy it is to use and the difference it makes in power characteristic and delivery.
Regarding the air filter: Saw a video from Factory Sherco where he showed that you had to twist the air filter a quarter of the way in one direction and it came out pretty easily. Worth a try :) (I dont own a Sherco myself but thinking about it so I am looking at everything Sherco...)
What’s up pnw. I just picked my 21 se 300 up. Sounds like the bike is holding up pretty well. Have you had any issues with water in the ecu harness and have you had issues with the fan? I’ve read several people have had issues with water getting into the fuse housing for the fan? I’ve only done one ride on this bike. My first Impression is that the bike feels much more balanced than my 21 husky te 300. The Kubrick is badass especially compared to the wp that the ktm/husky come with. The bike definitely put persons the husky in the slow technical, I feel I need to do some tweaks for the faster paced single track.
Fair enough review. I will say that my shifting in positive, and I don't believe I've ever missed a shift. It's almost notchy, but decent. Polisport plastics...clearly they don't care or they would have fixed their formula years ago. Let's face it, Acerbis is the king of plastics and anything else is down hill. Fitment, it's plain sloppy. I don't have the left side radiator fitment issue you do either, but the subframe/gas tank plastic junction is a mess and my subframe panel bolts barely line up with their holes. In this case though I don't really care, it's a dirt bike not a Lexus. The one issue I will take with your review is the front mousses. I've heard more amateur riders poo poo mousses as if they just couldnt control the bike, while failing to acknowledge that there isn't an off road race won without the rider being on mousses. So the same guys that will smoke by us like we are coasting somehow can make it work, but joe blow (in general, not aimed at you) thinks they are holding him back. different tires require different suspension set ups and mousses are no different. I know I will never carry tubes, irons, plugs, patches and pumps again!!!
Lol. I thought my subframe was bent, causing that gap in the plastics on the right side. I wonder how Sherco thought “ no big deal the plastics don’t fit “. That’s kinda of sloppy engineering. Oh well I’m still super happy with my bike.
Dude. Same....I had a standard mousse in my ktm and compared to tubliss up front the standard mousse felt absolutely awful. To the point I couldn’t trust my front end. Put the tubliss back on....totally different bike. I can see your point there for sure. Totally different feel. The slow stuff was fine. Didn’t notice the mousse. Faster stuff my front end would dance and do everything but track straight lol.
Interesting. I'm feeling the same thing and trying mousses for the first time m59 up front with nitro standard 235. Boy was it a PIA to mount like the mousse was too big. Hate the feeling compared to tubliss. In the rear I've got a m14 michelin in a d803 trials tire and that feels great. Love not having check pressures or carry tire tools but hate the feeling in the front.
@@PrimalEnduro it’s not you bro. Just know that. It’s the mousse. I thought it was me. I was like wtf am I doing wrong? Had my suspension dialed in. I was to the point to where I was about to go have a revalve done. Took the mousse out, tubliss back up front and it was night and day different. Maybe I didn’t let it break in enough Idk, I like the air feel better I gueS
@PrimalEnduro while the 21-235 is correct for the M59 according to the fitment guide imo it's too big for that tire. The soft mousse I used was a size smaller 21-220 and install was a breeze. I contacted Nuetech about this and they said the 21-220 will work fine but not last as long. I may have to try the Michelin or SRT mousse to compare the feel vs Nitro's.
@@PNWEnduro I was about to say in the m59 the 220 is a better fit I’ve heard. Idk I didn’t stay in the mousse game long enough to find out lol I hated it
Off topic but have you ridden a Beta 200? I have a Beta 300. I guy I know swears it’s the best combination of 125 type chassis and still low end grunt with the great motor. I’m in the southwest totally opposite terrain than your area
Yes, I did a few reviews on the 200rr late 2019 and early 2020. Beta Canada was kind enough to bring me out to one of their demos back east and also loaned me both the 200rr and 300rr as well. The 200 was a really fun bike for sure.
Where are you riding that you are breaking chain guides on the first ride? And fenders? I think you are just an hard riding animal hard Enduro guy And it is really cool looking
I wanted to ask you about your switch from TuBliss and Mousse inserts back to Tubes as I actually did the same thing around 6 months ago and I have found riding Tubes (regular or HD's) to be far better than the others. I don't know if my riding skills just go that much better or what it is but I used to swear by TuBliss and Mousses but now i'm far happier on Tubes. What are your thoughts?
I have never run tubliss. I did switch to a tube in the front because the mousse foam can’t react to impacts like air can. I still run a soft mousse on the rear wheel because the chances of a flat are greater. I may try tube saddles and a tube in the rear next.
I had the original Lectron, performance wise it's not on the same level at the Smartcarb. I am very interested in the new Billetron and may try one myself.
The stock carb is easy to tune. I run the SC2 because I ride a lot of different elevations and with the SC2 I don't need to change anything, the bike runs the same at all elevations. The added fuel economy is also a plus for some of the long backcountry rides I do.
mitch carvolth is making custom stubby break levers for the rear brake. i dont know why ktm makes them so freckin long . who rides on there heals? i did until i modded mine
I have the same bike and would agree with most of your points, However the petcock is a joke! I also think they could add some to the left side of the tank (like KTM) and move the petcock to that location. I really love the bike, might consider a 51 tooth for the rear. And yes, I also find neutral alot....... weird.... cheers
@@endurotruckererniedesjardins funny enough i actually run it all the way out on the front. ive been riding some really big rocks one after another at like 5mph max lately so it helps. old oil in the forks dont help either. shock is much slower rebound and comp.
I have 105 hours on same Sherco but 2020 model, never hit the false neutral. Other then that I agree on most counts. Plastics, stickers horrible, starter sucks as well.
Not really. A TPI bike has strong power up top for sure but I don't find this lacking at all. Keep in mind they have an FMF Gnarly pipe which is more for bottom end power.
Honestly not my favorite. Lots of torque and great in the slow stuff but the suspension is a bit lacking imo. I have only tried the 2018/2019 XT 300's, have not been on the newer counterbalanced models yet.
@@PNWEnduro Thanks - I think of the YZ125/250 I recall hitting false neutrals. Just the inherit design (not going to break or anything) just the way it is.
have you ever shifted into gear and had the feeling of being stuck between gears? i shifted from 2nd to 3rd on my bike and for a second it was stuck between gears and free reved like being in neutral...then it hooked up into 3rd and went...whats that all about you think.?
If it only happened once it's just that you didn't fully shift properly that's all especially if your not shifting with the clutch under high revs it happens
@@PP-wz7mp Dropping the forks in the clamps will effectively increase your rake angle, increasing high speed, straight line stability. People commonly raise the fork tubes in the clamps to improve low speed, tight conditions handling.
Yes it is. Easy to find info online showing the new motor with counterbalance. It's also easy to tell the difference when you compare it to an older model.
I did the water cup test in a pervious review comparing the Sherco to KTM. Like I said in this video as well it's not as smooth as a KTM but I don't notice it on the trail so it's not an issue for me.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Have about 10 hours on my 2021 se 300 factory and +1 on the poor plastics. Love every single thing about the bike except the plastics, they seem to stain easy, i ride dusty dry trails often and there is some discoloration on the white plastics from my pants rubbing. They are also expensive to replace, but if that's the worst thing about the bike I'll freaking take it.
Also, a little something I did was before I had even ridden the bike I took some griptape, cut it, and put it on the frame guards above the pegs, it keeps they from getting scratched up (like every other sherco I've seen) and helps just a little bit to keep my boot from sliding up. I would definitely recommend that as well as getting some clear gorilla tape and putting it under the frame guards/under the skid plate to ensure the paint doesn't wear off.
Best bike I've ever ridden, rode with some guys who have beta's, huskies, ktm's, and they all preferred this bike to the TPI. The sherco is so much smoother in the power band it's crazy.
Hi Greg. I really enjoy your content and always look forward to fresh uploads. I ride the same areas as you on a 2020 Beta 390. I would be very curious to get your take on that bike and would be happy to let you ride it for a review. Let me know if you're interested. Thanks again for the great content.
It's a freaking dream. I love mine. Most fun bike i've ever owned. Glad I'm not the only one with poor fitting plastics. Also hit neutral at the crappiest times! Then it's sometimes hard to find it on steep downhills as well... weird.
Good review. Two things I found out after riding my 2020 for about a year now.
Air Filter: I saw a video from Factory Sherco rep about how to do the filter.
If you rotate it 1/4 turn to the left it will come our pretty easy. (with the flat side toward the subframe) I was surprised how much easier that was on me and the filter lol.
On the plastic tank shroud. Hard to describe.
It took me a few times to figure out to put the bottom tabs of the shroud into the slots and get that good and tight seam then worry about the top by the tank.
Can get mine near perfect if I do the seam first and get the tabs aligned and gap tight and then put top of shroud on screws on tank.
I was doing it backward, the top first getting a screw in the tank and then could never get that gap to go away like you show in the video. Work on seam first.
Agree they plastics could be a bit more durable and standard $$$,
Most fun ride I have ever had or ridden for sure and I have had a few ridden MANY.
My local shop has a 22 factory in stock that was a cancellation. Its a nice looking machine.. coming off a 19 gasgas . Very tempting
Thorough and honest review of your machine - thanks for sharing.
Just ordered the 2022 se 300 Factory, can’t wait to see how it rides in the trails here in Hawaii.
Nice, when do you expect it to arrive? Sounds like the 22's will be in my area early August.
@@PNWEnduro Anytime now. The dealer said mid to late July.
Nice to see honest feedback on the bad stuff. The counterbalance issue, I don't know how you can call it a win when it still vibrates a lot. Saying it has more power because they didn't add the amount of weight they should have? That logic isn't very good IMO. The casings look identical to the china two stroke, I can't get past that point myself.
Great video. I’m still gonna jump from ktm to Sherco and give one a go.
Hands down the best 2 stroke i have ever owned for trail riding. You will not be sorry.
@@gregjohnson8285 I’ve heard great things. I love my ktm, but I want to try a Sherco. Everyone loves them it seems and they’re gaining hella traction in the States for sure.
@@Drewski423 I have a 2020 Sherco 300 and i love it
I just gave up my 21 Husky Te300 for the sherco se300. It is an amazing bike, I hope it holds up as well as my husky have.
@@Drew79 I’m gonna try one next bike I think
Excellent review mate, Ill add a few points having put 30 hours on mine:
- Plastics imo hold up better than on my last 2 bikes (Betas) but I have noticed the tank shroud doesn't quite fit - exactly like yours.
- Bolts, havent been an issue for me. I don't use torx, they hold water and end up looking ordinary growing surface rust.
- Footpegs, took some getting used to but they reward a rider standing more on the ball of your foot.
- Dash/Speedo actually works and holds time, unlike both my previous Betas. Kinda odd as they are all Trailtech. Beta wiring maybe the issue?
- KYB = awesome. totally agree with you.
- Chain guide.. I will replace mine, thanks for the tip.
- Break pedal, same. previous bikes i had the large tip. not needed on the Sherco
If I think of anything else Ill add it.
@Rider SC thanks for sharing. Yes the Beta plastics seem to be the most prone to breaking/cracking. Beta fixed the speedo issue for 2021, it was the mount causing the cable to not stay connected or so I'm told.
@@PNWEnduro I took the tank off mine (2020 300) and the tank was so hard to put back on
The subframe looks nice new but like this bike
in the video, it is really thrashed, bare alum on
kaw honda yamaha can get terrible looking too,
but not usually after 40 hrs plus you can polish
them out, having to stick no slip strips on it is
not the best solution, then the finished subframe is
hidden lol, I would only use the 'strips' if I wanted the
grip. I wouldn't go with Torx either, allen/hex bolts work
well.
Awesome review!!! All good points on the pluses and minuses. I did the opposite of yourself I started with a 2018 shreco 300 and now I'm on a 2021 husky te300i. I liked the sherco but man I really love this 300 husky!!!! But in saying that I would never rule out a new model sherco down the road. I still have yet to sample the KYB suspension
@jeff baer yes the KYB suspension is a big draw for people on the Sherco's.
Great video, I had a Beta and it used to hit neutral a LOT, played around with different oils and viscosities, tried 5 different types, ended up with Motul 10/60 100% synthetic, (as apposed to full synth, there is a difference !) and that fixed the problem. Now have a 2020 KTM 300, did the same test, ended up with the stock Moterex 15/50. I know it sounds like BS, but oils can make a big difference, imho :-)
I'm using the same brand oil as I did on my KTM's but I'll have to try some other brands to see if it helps.
Thanks for the review man! Good job! I can’t wait to see the comparison to the te300 pro 😉
PNW, some good valid points there, some not so much in my opinion.
Definitely 100% agree with the fun factor + !
1/ The plastic fitment issue has been raised with the factory in France and it is due to the fuel tank not seating in the frame properly.
Have a look at the frame paint under the tank and you note a rub mark where it's pressed hard on the bottom of the tank. Sherco even deleted the rear tank bolt because it was nearly impossible to install 😒
2/ The bolts....
I love that they aren't Torx, as a mechanic I don't like them personally.
I already carry sockets and spanners in my pack, needing to carry a Torx set as well is more weight.
3/ KYBs are the bomb, really great on mine at 53hrs, will have them serviced soon.
4/ On the plastics being brittle, none of the 3 bikes I've owned have cracked anything plastic including the 21 model.
They're made by Polisport for Sherco the same as other brands 🤷♂️
5/ The air filter is my biggest annoyance, it's a terrible design - agreed.
It would be impossible to change quickly in a race without dumping dirt down the intake and you're never sure it is seated without removing a side panel.
6/ One you missed is the crazy fuel tap location. I just leave mine on 24/7 and deal with the fumes in the garage rather than stuff my hand in there 🙂
Maybe I've just had bad luck with the plastics? I've done more damage in 40 hours than I did on 3 KTM's combined 895 hours.
@@PNWEnduro
Maybe 🤷♂️
Perhaps it's because it's colder where you ride too. Typically at least 15C where we ride and often up to 30C.
Sherco did make the plastics more flexible in 2017 after being board-stiff prior to that.
I have a white 'plastic bruuse' where you pointed to your front mudguard, mine hit a tree and flexed back.
At least they're cheap to buy at $50 🙂👌
Roll it on and enjoy!
lol Torx, me to, not a fan at all.
I couldn't agree anymore with your plus five and minus five. I do wish Sherco would go through the effort to make the gas tank / plastics fit properly. In addition it would be nice if they would allow some aftermarket companies to make replacement plastics that aren't so brittle
Good review Greg,thanks for putting it together. How are you finding the fuel consumption now that you have the Smart Carb? My only complaint with my 2021 is the amount of fuel I go through and the chance of running out.
I'm happy with the fuel economy. I hit reserve at 76km on one ride so I'm sure I could get over 100km on a full tank.
Thanks for the review! Nice job. Do you have more fun on the 250 or the 300?
I prefer the 300.
Love the honesty. Too many people don't say negatives.
Cheers!
that fan on the radiator is nice
So much great information. Thank you. Is this bike street legal?
Not street legal where I live. It can be some places if you add the required parts.
I have over 90 hrs on my 2019 factory 300, I have never had any issues with the plastics, in fact the total opposite. No big issues.
love the vid i have same plastic issue with it not fitting on one side
I'm pretty sure it's the tanks. They just have too much variation between them. All it would take is better tolerance for mounting the plastics, a little more wiggle room.
@@MDHaughton I agree 100% that it's the tanks. In comparing three identical bikes side by side the tanks all fit different. It may even be noticed that there's a hole in the tank that's supposed to line up with a bolt hole in the frame and they do not line up. This issue can even affect the way the seat fits
I had the neutral problem with my ktm 300, just adjusted the gear lever and never had another issue.
Was the lever too high or too low??? And what was ur adjustment? Having the same problem on my beta
@@michaelarnold8158 to high from memory.
Do you have a scale to weigh it? Just wondering what it actually weighs ready to ride. And the price always seemed high to me compared to ktm that has a pretty expensive efi system compared to carbs. Good video.
I'd like to get a scale eventually but they are quite expensive. Where I live the factory edition costs about the same as the base level KTM. Sure no efi system but you get full KYB suspension, fan, skid plate and gnarly pipe stock on the Sherco.
Not had any issues with accidentally putting the bike in neutral at all on my 2021 300 SE Factory. In fact, I have to be very intentional to get it into neutral. Plastic fitment is good on mine as well (not that it makes any difference in how it performs).
I agree that the airbox is tight. Should be able to remove and install the filter without it dragging the sides of the subframe, but there just isn't room on this bike. Also agree that vibration is NOT a factor at all. Never notice it. Love the map switch and how easy it is to use and the difference it makes in power characteristic and delivery.
Regarding the air filter: Saw a video from Factory Sherco where he showed that you had to twist the air filter a quarter of the way in one direction and it came out pretty easily. Worth a try :) (I dont own a Sherco myself but thinking about it so I am looking at everything Sherco...)
What’s up pnw. I just picked my 21 se 300 up. Sounds like the bike is holding up pretty well. Have you had any issues with water in the ecu harness and have you had issues with the fan? I’ve read several people have had issues with water getting into the fuse housing for the fan?
I’ve only done one ride on this bike. My first Impression is that the bike feels much more balanced than my 21 husky te 300. The Kubrick is badass especially compared to the wp that the ktm/husky come with. The bike definitely put persons the husky in the slow technical, I feel I need to do some tweaks for the faster paced single track.
@Drew79 no issues with the ECU harness or fan so far on mine. Congrats on the new ride!
I busted my rear chain guide in the first week as well. I did manage to high side after swapping on through some whoops. I only bent the bars. :)
I seem to find neutral quite a bit also , in my first two hours.
Break the spark plug loose then turn over the motor to blow out loose debris.
Great tip!
I understand the neutral issue same on mine and plastics don't seem to line up well
ktm chain guard fits perfectly on sherco
Great review Greg!
Fair enough review. I will say that my shifting in positive, and I don't believe I've ever missed a shift. It's almost notchy, but decent. Polisport plastics...clearly they don't care or they would have fixed their formula years ago. Let's face it, Acerbis is the king of plastics and anything else is down hill. Fitment, it's plain sloppy. I don't have the left side radiator fitment issue you do either, but the subframe/gas tank plastic junction is a mess and my subframe panel bolts barely line up with their holes. In this case though I don't really care, it's a dirt bike not a Lexus. The one issue I will take with your review is the front mousses. I've heard more amateur riders poo poo mousses as if they just couldnt control the bike, while failing to acknowledge that there isn't an off road race won without the rider being on mousses. So the same guys that will smoke by us like we are coasting somehow can make it work, but joe blow (in general, not aimed at you) thinks they are holding him back. different tires require different suspension set ups and mousses are no different. I know I will never carry tubes, irons, plugs, patches and pumps again!!!
Good review. Thanks. 😊
You forgot the hugest positive of the Sherco....it has a carb!!! Think I'm going to make the witch from KTM after 15 years on the Austrian bikes...
Agreed!
Lol. I thought my subframe was bent, causing that gap in the plastics on the right side. I wonder how Sherco thought “ no big deal the plastics don’t fit “. That’s kinda of sloppy engineering. Oh well I’m still super happy with my bike.
It would be such an easy thing to fix too.
lol damn those buildings look familiar........you in PoCo.....??
Dude. Same....I had a standard mousse in my ktm and compared to tubliss up front the standard mousse felt absolutely awful. To the point I couldn’t trust my front end. Put the tubliss back on....totally different bike. I can see your point there for sure. Totally different feel. The slow stuff was fine. Didn’t notice the mousse. Faster stuff my front end would dance and do everything but track straight lol.
Interesting. I'm feeling the same thing and trying mousses for the first time m59 up front with nitro standard 235. Boy was it a PIA to mount like the mousse was too big. Hate the feeling compared to tubliss. In the rear I've got a m14 michelin in a d803 trials tire and that feels great. Love not having check pressures or carry tire tools but hate the feeling in the front.
@@PrimalEnduro it’s not you bro. Just know that. It’s the mousse. I thought it was me. I was like wtf am I doing wrong? Had my suspension dialed in. I was to the point to where I was about to go have a revalve done. Took the mousse out, tubliss back up front and it was night and day different. Maybe I didn’t let it break in enough Idk, I like the air feel better I gueS
@PrimalEnduro while the 21-235 is correct for the M59 according to the fitment guide imo it's too big for that tire. The soft mousse I used was a size smaller 21-220 and install was a breeze. I contacted Nuetech about this and they said the 21-220 will work fine but not last as long. I may have to try the Michelin or SRT mousse to compare the feel vs Nitro's.
@@PNWEnduro I was about to say in the m59 the 220 is a better fit I’ve heard. Idk I didn’t stay in the mousse game long enough to find out lol I hated it
@@PNWEnduro a couple people told me if I didn’t like the nitro mousse I would hate the other brands lol. So idk if I could ever like any of them.
I'm sure happy with my 2021 Beta 300 Racer. My other choice would be the Sherco though.
What gearing do you run, did the rear sprocket foal with axp guide?
Cheers
Stock gearing.
I wonder if the plastics are Polisport like the Betas? Very brittle
Thanks for the great review.
Off topic but have you ridden a Beta 200? I have a Beta 300. I guy I know swears it’s the best combination of 125 type chassis and still low end grunt with the great motor. I’m in the southwest totally opposite terrain than your area
Yes, I did a few reviews on the 200rr late 2019 and early 2020. Beta Canada was kind enough to bring me out to one of their demos back east and also loaned me both the 200rr and 300rr as well. The 200 was a really fun bike for sure.
Hey you in Squamish? I noticed the sticker. I'm looking for a new bike, you still on the Sherco?
I'm not in Squamish. Love the Sherco, will buy another one.
Where are you riding that you are breaking chain guides on the first ride? And fenders? I think you are just an hard riding animal hard Enduro guy
And it is really cool looking
Have you try out Flo foot pages
Like the fact that it comes stock with a cooling fan 😅
I wanted to ask you about your switch from TuBliss and Mousse inserts back to Tubes as I actually did the same thing around 6 months ago and I have found riding Tubes (regular or HD's) to be far better than the others. I don't know if my riding skills just go that much better or what it is but I used to swear by TuBliss and Mousses but now i'm far happier on Tubes. What are your thoughts?
I have never run tubliss. I did switch to a tube in the front because the mousse foam can’t react to impacts like air can. I still run a soft mousse on the rear wheel because the chances of a flat are greater. I may try tube saddles and a tube in the rear next.
Hey Greg, I am thinking of putting the new Billetron carb on my 2018 300xc. What are your thoughts on your Lectron carb? Thanks, Nick
I had the original Lectron, performance wise it's not on the same level at the Smartcarb. I am very interested in the new Billetron and may try one myself.
How did you find the carb tuning of the bike standard? Is there a reason you changed to the smart carb?
The stock carb is easy to tune. I run the SC2 because I ride a lot of different elevations and with the SC2 I don't need to change anything, the bike runs the same at all elevations. The added fuel economy is also a plus for some of the long backcountry rides I do.
mitch carvolth is making custom stubby break levers for the rear brake. i dont know why ktm makes them so freckin long . who rides on there heals? i did until i modded mine
And has a carb!!! Too many horror stories with TPI!!
Good review!
Any troubles sourcing parts? Took me 4 weeks to get a new rear fender for my '14 SEF-R.
Can't get a spark arrestor at the moment but other than that my Sherco dealer has more parts available than any of the local KTM/Husky dealers.
get your self a spark plug boot like the ktms have should stop debris from building up in there
Yep, will do!
I’m looking to get into enduro when I’m 17 next year. Just wondering what’s the best enduro bike for me to get
Cr500 or kx500
@@greenmonster3588 your a bit late pal already got my self a ktm
I have the same bike and would agree with most of your points, However the petcock is a joke! I also think they could add some to the left side of the tank (like KTM) and move the petcock to that location. I really love the bike, might consider a 51 tooth for the rear. And yes, I also find neutral alot....... weird.... cheers
Yes good point on the petcock, it's a little awkward to reach.
Just add a on/off valve at the end of the fuel hose near the carb. Problem solved
Best bike ever
Any issues with the clutch? Read of some issues on some online forums
No problems with the clutch so far.
new models have new clutch plates. old models with adler plates were very bad
I have the same sort of setup on my yz250x suspension. soft front end, stiffer rear. stability isnt an issue for me to be honest
How many clicks out do you run? I run my yz250 at 14 out
@@endurotruckererniedesjardins funny enough i actually run it all the way out on the front. ive been riding some really big rocks one after another at like 5mph max lately so it helps. old oil in the forks dont help either. shock is much slower rebound and comp.
I have 105 hours on same Sherco but 2020 model, never hit the false neutral. Other then that I agree on most counts. Plastics, stickers horrible, starter sucks as well.
Love the bike
How is the top end power? Is it a little flat compared to the ktm?
Not really. A TPI bike has strong power up top for sure but I don't find this lacking at all. Keep in mind they have an FMF Gnarly pipe which is more for bottom end power.
What do you think of the Beta XT 300 ?
Honestly not my favorite. Lots of torque and great in the slow stuff but the suspension is a bit lacking imo. I have only tried the 2018/2019 XT 300's, have not been on the newer counterbalanced models yet.
Fantastic bike.
Is the transmission NOTCHY ? -- How does the shifting compared to a KTM like a 250/300 TPI ???
I would say a bit notchy. Not quite as smooth shifting as the KTM brands but it's not something that bothers me.
@@PNWEnduro Thanks - I think of the YZ125/250 I recall hitting false neutrals. Just the inherit design (not going to break or anything) just the way it is.
have you ever shifted into gear and had the feeling of being stuck between gears? i shifted from 2nd to 3rd on my bike and for a second it was stuck between gears and free reved like being in neutral...then it hooked up into 3rd and went...whats that all about you think.?
Can't say I've experienced that so far.
If it only happened once it's just that you didn't fully shift properly that's all especially if your not shifting with the clutch under high revs it happens
@@tcmx712 good to know thanks
Whats that on the gas tank under the seat ? 7:00
Tow strap.
Thanks for your review... I’m in a real beta, Sherco, gas gas pickle right now
Go the Sherco or Beta. Cant go wrong
I heard that if you drop the forks 1-2mm the bike becomes more stable.
BS...
@@PP-wz7mp Dropping the forks in the clamps will effectively increase your rake angle, increasing high speed, straight line stability. People commonly raise the fork tubes in the clamps to improve low speed, tight conditions handling.
When are 2022's available? Anyone?
Sounds like July/August around here. Dealers are taking deposits.
Does this Sherco feel physically smaller than the KTMs and Huskys you've ridden?
@PaiN's Rides yes they do feel a little more compact even though the actual specs are pretty close physically.
@@PNWEnduro Thx for the info
Yeah man good , shall we say mid term , report. Just getting broke in.....
price.
Stop talking its a counterbalanced bike please . Its not!
Yes it is. Easy to find info online showing the new motor with counterbalance. It's also easy to tell the difference when you compare it to an older model.
@@PNWEnduro Can you do the water cup test again. I rode 2021 and comparing to KTM i don't think u can call it counterbalanced.
I did the water cup test in a pervious review comparing the Sherco to KTM. Like I said in this video as well it's not as smooth as a KTM but I don't notice it on the trail so it's not an issue for me.
@@PNWEnduroI agree counter balanced bike or not is not that important.