Many dont believe 300 series sst butt welds have excellent strength by just fusing as long as there are no gaps. I built a set of 18ga 304 headers for a customer's car 20 years ago with fused tubes and they are still in service
I have my own signature series of UV Tig welding sleeves coming out soon! When ever I’m seen in a short sleeve, I’m wearing helioplex spray. When the weather is too hot to handle I’m still covered and protected.
Would love if you slowed it down just a tad bit and cannot get enough of your videos as a sanitary welder myself but they need to be longer! #NeedMoreRush!
People never understand how much something like this is worth I constantly have people inquiring about me doing something like this pie cut pipe and then when I tell them how much it cost they turn around and run away. I charge 60$ an hour for this kinda work that even may be low.
I cannot for the life of me get mine to look like this on my Lincoln Square wave. If run 85amp at 1.6p it keeps undercutting. The only way for me to get the raised dime look is at roughly 49amp but no penetration. Ive tried every freaking setting and cannot mimick this. Thanks for the awesome video and I keep attempting to do this.
Does the machine have pulse parameter adjustment? You need to be able to set the time percentage the arc is on high amperage (peak on time) and the (background) constant amperage or percentage of peak amperage, depending on brand of machine. If it’s a preset 50/50 type of machine, it would make sense that you would drop the peak amps due to a greater constant amperage input. If that’s the case, I’d say run a shorter point on your tungsten (≈45-55°). The bead will be narrower, but penetrate through deeper at the same amperage. Make sure the electrode is pushing at a decent angle; this allows more molten material mass to expand and shrink together(like the start of a bandsaw cut on round tube). The push angle that seems to help me most is about 45°. Hope this helps!
@@KANEKIDWELDS the machine doesn't have a pulse parameter adjustment. It is a Lincoln square wave so maybe I just need to upgrade. With that said I played more with it today and at 70-75 amps, 1.4pulse, 30cfh, and 10cfh purge it was nearly perfect. Still not as pretty as yours but its getting there. So I wasn't purging before because I figured what is the point while practicing and I didnt care what the inside looked like. While not positive I came to the conclusion that when you dont purge it does effect the outside as well. Thank you for taking the time out of your day to reply to me.
He typically tries to position himself to where the gloves get most the UV but...I knows its unavoidable, and a ligit question. I do the same thing at work all the time, especially tacking, but I know I def shouldn't, about like smoking (cant see the damage, but u know its slowly shaving healthy days off your life)
I love your vids! One question, how can you weld in a short sleeve shirt and not get flash burn on your skin? If I weld for 5 minutes or more, my skin gets burnt to the point of it smelling for days.
I have a Lincoln 200 Squarewave and I can only adjust the PPM. When I try to weld Autogenous without Filler, I can not get the weld to be Convexed only Concaved and It doesn't brake down the wall on the root side. I tried from 50a-70a on 3" 304 Stainless 0.065".
Derrick Cohee thanks! This stuff is really fun! It’s one of Heavy D’s personal fun haver machines, and now it should fictitiously sound like a turbo diesel porsche!
How many CFH backpurge are you running. Also. I don’t believe I saw you clean everything with acetone? Is that true? Sorry to be probing, doing a lot of stainless my self lately
I've been questioned about this,my welds have no penetration but look awesome from the outside and are not concave they're either flat or round is this suitable for a turbo dump which is under constant thermal expansion and stress from the turbo
Hard to see in the video but when you tig autogenous do you find the weld bead profile more concave since you did not use filler and if so is this an issue? Also what's your take on 308/309LSI tig rod? Thanks bud love your work and videos!
While I am fascinated at your skills and knowledge, I only have one question. Where is your full PPE packaging. Arms exposed doesn’t seem to be a good thing. Please explain why your arms are exposed to the UV radiation light. I have been welding and continuing to learn over the last 6 years. Maybe you could share some knowledge I have not read, seen nor heard. Thanks
Hi! Thanks for the concern! This video is from a couple years ago when I worked in the smco/diesel brothers without AC. It was incredibly hot inside that shop in the summer, some days reaching 120°+F. I would apply a highly rated complete spectrum UV sunscreen about every 45 minutes on all exposed skin. This is something I felt protected by at the time and my personal research showed it to be adequate. This is the specific reason I designed and created my personal line of ppe, arc defence™, at kaneindustries.co I created a super easy pull-on welding sleeve that deflects sparks and shields the UV spectrum from the skin. & they’re in specific sizing xs-xxl so there’s a size that will actually fit everyone that needs good welding sleeves.
@@KANEKIDWELDS thanks Rush. I just happened on your channel today. I will definitely check out your site and see what kind of fun toys and PPE you are selling. I feel like I never have enough tools and gloves. I really do appreciate your answering me so soon. In actuality, I didn’t expect an answer at all. Thanks again.
looks like a hagglunds dont think anyone else makes them and they dont produce them any more..? I drove these machines in Antarctica, bumpy ride but go anywhere!
its good to see someone who loves his job.
joe prinsen thanks👊🏼
Many dont believe 300 series sst butt welds have excellent strength by just fusing as long as there are no gaps. I built a set of 18ga 304 headers for a customer's car 20 years ago with fused tubes and they are still in service
Wonderful video! The machine settings and your comments are very much appreciated.
Philip Ershler thanks!
Always a pleasure seeing a new video notification from you. The side notes are very informative! Thanks 🤘🏼
Awesome Rush !!
Thanks!
Very nice work!
Beautiful work as always. Have come to expect nothing less from you
Good vid bro 💪🍻
You have absolutely amazing skill Rush! I hope you teach, if not you should do!
CrazySparkie63 thank you!
You make it “ Effortless “ 🙏
You could set up some different sized v bands that are welded to bearing/lazy Suzan. You could then rotate the part as you weld much easier.
Gorgeous welds Rush!! Thanks for sharing.
Thanks for watching!
Wow! Really enjoy all the technical specs in yours vids. 😄
Us home hobbyist treasure these lessons!
That came out so sick
Kane kid is the bomb!! Wish I can get that good one day sir!!
Amazingly nice as always, tnx for the lesson mate !!!
man my arms get sunburned if i dont wear sleeves after like 15 minutes.
looks really nice and clean without filler.
yeah only it never gets a tan its just cooked skin
I have my own signature series of UV Tig welding sleeves coming out soon!
When ever I’m seen in a short sleeve, I’m wearing helioplex spray. When the weather is too hot to handle I’m still covered and protected.
Luar biasa hasil welding tig nya.👍🤝
THE MASTER
Would love if you slowed it down just a tad bit and cannot get enough of your videos as a sanitary welder myself but they need to be longer! #NeedMoreRush!
People never understand how much something like this is worth I constantly have people inquiring about me doing something like this pie cut pipe and then when I tell them how much it cost they turn around and run away. I charge 60$ an hour for this kinda work that even may be low.
Thanks
I cannot for the life of me get mine to look like this on my Lincoln Square wave. If run 85amp at 1.6p it keeps undercutting. The only way for me to get the raised dime look is at roughly 49amp but no penetration. Ive tried every freaking setting and cannot mimick this. Thanks for the awesome video and I keep attempting to do this.
Does the machine have pulse parameter adjustment? You need to be able to set the time percentage the arc is on high amperage (peak on time) and the (background) constant amperage or percentage of peak amperage, depending on brand of machine. If it’s a preset 50/50 type of machine, it would make sense that you would drop the peak amps due to a greater constant amperage input. If that’s the case, I’d say run a shorter point on your tungsten (≈45-55°). The bead will be narrower, but penetrate through deeper at the same amperage. Make sure the electrode is pushing at a decent angle; this allows more molten material mass to expand and shrink together(like the start of a bandsaw cut on round tube). The push angle that seems to help me most is about 45°. Hope this helps!
@@KANEKIDWELDS the machine doesn't have a pulse parameter adjustment. It is a Lincoln square wave so maybe I just need to upgrade. With that said I played more with it today and at 70-75 amps, 1.4pulse, 30cfh, and 10cfh purge it was nearly perfect. Still not as pretty as yours but its getting there. So I wasn't purging before because I figured what is the point while practicing and I didnt care what the inside looked like. While not positive I came to the conclusion that when you dont purge it does effect the outside as well. Thank you for taking the time out of your day to reply to me.
Good job! How isn't your uncoverd skin surface getting burnt by UV? I welded in a t-shirt a day before and my skin is still red and oversensitive..
He typically tries to position himself to where the gloves get most the UV but...I knows its unavoidable, and a ligit question. I do the same thing at work all the time, especially tacking, but I know I def shouldn't, about like smoking (cant see the damage, but u know its slowly shaving healthy days off your life)
I use helioplex UV spray for the hot summer months, then switch back to long sleeves or my pull on UV sleeves when it cools back down.
Now I know. Smart!
Brilliant videos! Is there a reason you don't use filler wire? I thought to maintain strength in the weld you need filler? Cheers
I love your vids!
One question, how can you weld in a short sleeve shirt and not get flash burn on your skin?
If I weld for 5 minutes or more, my skin gets burnt to the point of it smelling for days.
I’m surprised it’s just 13.7k subs. By now I expected many more. I don’t get it.
I have a Lincoln 200 Squarewave and I can only adjust the PPM. When I try to weld Autogenous without Filler, I can not get the weld to be Convexed only Concaved and It doesn't brake down the wall on the root side. I tried from 50a-70a on 3" 304 Stainless 0.065".
Now do all of this! But With allllll the improper tools!!!
no
Killer job rush! That looked fun as hell, and those vehicles were outrageous! Lol just a custom "fooling around vehicle" or for something else?
Derrick Cohee thanks! This stuff is really fun! It’s one of Heavy D’s personal fun haver machines, and now it should fictitiously sound like a turbo diesel porsche!
How many CFH backpurge are you running. Also. I don’t believe I saw you clean everything with acetone? Is that true? Sorry to be probing, doing a lot of stainless my self lately
Спасибо.
Hope it is useful,good job
Bow to the tig master
What kind of clamp is that? Thanks Awesome welds.
I'm not one to be jealous... But I dream of having half your ability. What you have can't be taught.
Why don`t you wear a jacket or sleeves when welding? Are you not aware of the danger of UV/ IR when welding???
Why do you dont use input in. The welds?
Where does one go to learn this craft?
Is there no need for filer rod in this application is it strong enough bud
The only filler metel used was on mount bracket? Thanks for the vid.
w,c,m,w &fab yessir. I have all my other fit ups air tight, but the bracket needs a filled fillet weld.
I've been questioned about this,my welds have no penetration but look awesome from the outside and are not concave they're either flat or round is this suitable for a turbo dump which is under constant thermal expansion and stress from the turbo
Hard to see in the video but when you tig autogenous do you find the weld bead profile more concave since you did not use filler and if so is this an issue? Also what's your take on 308/309LSI tig rod? Thanks bud love your work and videos!
Do you really need a pulse setting or can you just do this with a foot pedal?
While I am fascinated at your skills and knowledge, I only have one question. Where is your full PPE packaging. Arms exposed doesn’t seem to be a good thing. Please explain why your arms are exposed to the UV radiation light. I have been welding and continuing to learn over the last 6 years. Maybe you could share some knowledge I have not read, seen nor heard. Thanks
Hi! Thanks for the concern! This video is from a couple years ago when I worked in the smco/diesel brothers without AC. It was incredibly hot inside that shop in the summer, some days reaching 120°+F. I would apply a highly rated complete spectrum UV sunscreen about every 45 minutes on all exposed skin. This is something I felt protected by at the time and my personal research showed it to be adequate.
This is the specific reason I designed and created my personal line of ppe, arc defence™, at kaneindustries.co
I created a super easy pull-on welding sleeve that deflects sparks and shields the UV spectrum from the skin. & they’re in specific sizing xs-xxl so there’s a size that will actually fit everyone that needs good welding sleeves.
@@KANEKIDWELDS thanks Rush. I just happened on your channel today. I will definitely check out your site and see what kind of fun toys and PPE you are selling. I feel like I never have enough tools and gloves.
I really do appreciate your answering me so soon. In actuality, I didn’t expect an answer at all. Thanks again.
Perfeito!
Is that a hagglunds bv?
Sure looks like one, but I can't quite make out the model. I used to drive a 206 during my military service.
looks like a hagglunds dont think anyone else makes them and they dont produce them any more..?
I drove these machines in Antarctica, bumpy ride but go anywhere!
I really want to be as good as you, just without all the talent and practice you put in.
Is there any boost pressure going through this?
No filler rod?
Spray sunscreen?
Something I used multiple times a day to combat hot summer temps, before I made the arc defence™ sleeves.
making it look too easy