It is a brilliant piece of kit, i have one for about 2 years now and it hasn't gone wrong one's, money worth spending for any air gun enthusiasts Brilliant video pal keep you the good work 😁👍👍👍👍
ive got one and have had it for 6 mouths with no props at all love it and highly recommend to anyone after one. Don't waste your money on the cheap water cooled Chinese ones save up and get the nomad 2 10/10 from me.
I e been thinking on getting one of these. Am looking into the Umarex compressor also. I have a Yong Heng. Keep them cool and you’ll be okay. That and they are LOUD!
Loud with a capital L, but as you say keep them cold and treat them carefully and they should last, these are nicer compressors though and they are backed with a warranty, which the Yong Hengs don't have. The only thing about them that's a bit disappointing is lacking the capability to fill a bottle up. Thanks for watching.
Awesome video mine only lasted a year and 3 months before it blew the Piston rod out the side of it thats cause I took very good care of it I guess not enough care I should of bought a youg heng compressor thanks for sharing bsafe didn't mean to ruin the review just tell my story about that compressor
No problem mate, I am not paid by anyone so it don't matter to me, I would rather you be honest and let people decide for them selves. The Yong Hengs are nice but they seem it be hit or miss as well and I can defiantly say they are on the noisy side. Thanks for watching.
As someone new to PCP... A general questionfor you; your bottle has a max pressure of 230, you set the compressor to 225, your tank ended up at 230. I take it there's a margin of error acceptable. What is this margin, roughly?
All bottles on PCP airguns should be tested to roughly 1.2 -1.5 times there safe working pressure, so you don't have to worry about the bottle exploding if you go 10-20 bar over the max pressure. But you should try not to go over the specified max fill pressure, I normally just fill my rifles to just under the fill pressure, for a 230 bottle I would fill to 210-220 to allow for any changes in temperature. Thanks for watching.
Sir I have also used the huma quick conector n i have damage my new dreamtac 170cc cylinder in my first used of this fill sir can u kindly show how to open n re built the 170cc cylinder it will be very helpful for me thankyou
You run it off the battery so you can leave the car switched off but it would probably be better to switch the car on and leave it idling for longer fills so the battery does not drain. Thanks for watching.
If some innovative inventor creates a pedal-powered air compressor for PCP airguns, that product will take the industry by storm. Electric-powered compressors go way up in price as quality improves, and those hand pumps are a bear to operate even for a fit and youthful person. A Stationary bike-type setup would be less strenuous than a hand pump, but far cheaper than an electric-powered pump. Here's hoping an inventor rises to the occasion with this idea.
It is a brilliant piece of kit, i have one for about 2 years now and it hasn't gone wrong one's, money worth spending for any air gun enthusiasts
Brilliant video pal keep you the good work 😁👍👍👍👍
ive got one and have had it for 6 mouths with no props at all love it and highly recommend to anyone after one. Don't waste your money on the cheap water cooled Chinese ones save up and get the nomad 2 10/10 from me.
I've been looking at these,nice one cheers for the upload 👍
I love my Nomad 2.
I keep a written journal on everything. I haven't had one problem. 👍👍👍👍👍
good little machines these, as long as you take care of them they should work no problem. Thanks for watching.
Hi Heith. Where did u buy it and can my hw100kt be filled straight from this ? Kind regards David
Great piece of kit use it all the time.
Certainly is, filled up all my rifles no problems. Thanks for watching 👍.
I e been thinking on getting one of these. Am looking into the Umarex compressor also. I have a Yong Heng. Keep them cool and you’ll be okay. That and they are LOUD!
Loud with a capital L, but as you say keep them cold and treat them carefully and they should last, these are nicer compressors though and they are backed with a warranty, which the Yong Hengs don't have. The only thing about them that's a bit disappointing is lacking the capability to fill a bottle up. Thanks for watching.
sweet 👌
Thank you! Cheers!
Awesome video mine only lasted a year and 3 months before it blew the Piston rod out the side of it thats cause I took very good care of it I guess not enough care I should of bought a youg heng compressor thanks for sharing bsafe didn't mean to ruin the review just tell my story about that compressor
No problem mate, I am not paid by anyone so it don't matter to me, I would rather you be honest and let people decide for them selves. The Yong Hengs are nice but they seem it be hit or miss as well and I can defiantly say they are on the noisy side. Thanks for watching.
Do you no where to get the filters from ive got one but run out of filters
As someone new to PCP... A general questionfor you; your bottle has a max pressure of 230, you set the compressor to 225, your tank ended up at 230.
I take it there's a margin of error acceptable. What is this margin, roughly?
All bottles on PCP airguns should be tested to roughly 1.2 -1.5 times there safe working pressure, so you don't have to worry about the bottle exploding if you go 10-20 bar over the max pressure. But you should try not to go over the specified max fill pressure, I normally just fill my rifles to just under the fill pressure, for a 230 bottle I would fill to 210-220 to allow for any changes in temperature. Thanks for watching.
Does anyone know if the Nomad II will run off a vehicle's 400W (MAX) A/C Power Inverter?
Hi great review, will it fill a 1.1 ltr w-end bottle thanks
yes i would think so 👍
From what company can I order one of those compressors to be sent to Sweden?
Sportsman gun center will ship internationally, the postage is a little expensive though. Thanks for watching.
Love mine. Back saver of old men. Lol
Better than a hand pump that's for sure. Thanks for watching.
Good vid mate. Can I use this for my hw100kt directly to the gun straight out of the box? Atb David
Yes you can connect direct to the gun straight out of the box
@@sub12airgunners thanks pal
Sir I have also used the huma quick conector n i have damage my new dreamtac 170cc cylinder in my first used of this fill sir can u kindly show how to open n re built the 170cc cylinder it will be very helpful for me thankyou
Hi, yep ill try and make a vid on the bottle disassembly at some point in the very near future. Thanks for watching.
@@sub12airgunners thankyou sir for ur reply n Im eagerly waiting to c it soon ur video helps alot of people in this world 🙏👍
IF they are hooked to a motor do you need to have the engine running
You run it off the battery so you can leave the car switched off but it would probably be better to switch the car on and leave it idling for longer fills so the battery does not drain. Thanks for watching.
If some innovative inventor creates a pedal-powered air compressor for PCP airguns, that product will take the industry by storm. Electric-powered compressors go way up in price as quality improves, and those hand pumps are a bear to operate even for a fit and youthful person. A Stationary bike-type setup would be less strenuous than a hand pump, but far cheaper than an electric-powered pump. Here's hoping an inventor rises to the occasion with this idea.
Is this worth the asking price?
the simple answer is i don't know, there are so many that look very similar now but i think the Nomads are about £500 uk 👍
No a waste of money, there are no repairs or spare parts available, so when it fails you can throw in the bin
I promise you, filling up from your car on a wet windy winters day, gets old really quickly. Bet you can't find that kind of fill in the adverts.
Warning - No repairs or spare parts available, so when it fails you can throw your £600 plus compressor in the bin !!!