It replaces the stock amp it says ? But don’t you still need an aftermarket amp to power the stereo ? This powers the speakers as well ? It sounds like it does but I have a feeling that wasn’t the intent .
Installed the DSR-1 today. No output. 500ohms across all 4 channels for the CAN bus to be satisfied. I have Can bus communication to the device and can communicate via Bluetooth just fine. But no output.. Any thoughts or ideas? 2017 Dodge Challenger Hellcat with Harman Kardon amp. Maestro tech support is out of ideas and I'm waiting for Rockford Fosgate to get back to me at this point.
One more thing to add, its because i searched and can't find the speaker wire coming out of my stock unit, search everywhere but can't seem to find the matching colors coming out of my stock head unit
What provides the remote turn on for the aftermarket amplifier? It appears like only rca outputs go from dsr1. How does the aftermarket amp know to power on? Is there something I should look for in an aftermarket amp for compatibility with dsr1?
Just picked one of these up with the aFO2 t-harness for my 2015 Ford Focus ST with the stock sony system. The factory Sony system is horrendous. Ive got 2 Audiocontrol amps going in with this, a kicker sub, and 2 sets of component Memphis speakers being installed in about a week. Im beyond excited.
I have a 2018 Harley davidson Rpad Glide , and i installed the DSR1 along with a DIAMOND amp and the entire front channel wiring harness. I bridged my 4 channel amp up front only to my 2 front fairing speakers on my bike. I'm also running the HERTZ Mille PROX 165.3 6.5' inch speakers to each speaker. My question is about the DSR1 hookup to my bike battery. I ran the power cables thru the front fairing slot all the way down the wiring channel to the battery which is underneath my seat. My question is this: I was told to run an inline fuse of the DSR1 and run a ground and a seperate yellow wire (+) and hook that up to my battery for the DSR1 fuse. How do I connect skinny 18-22 gauge wires to my battery alongside my power cables which are 8AWG? In other words, where on the battery terminal do I connect the DSR1 inline fuse wires, they are really thin!
I have a 2018 ford mustang ecoboost shaker premium 9 speaker sound system with no Subwoofer. Can I use this with my setup and can I add a Subwoofer to go with it and what channel amp do I need.
Nathan Rix ok got you but what I’m asking is will i still need to run wiring of some sort or is everything plug and play after I get the correct harness?
Am I able to hook up a mono amp, 4 channel and 2 channel amp and keep my factory radio?
It replaces the stock amp it says ? But don’t you still need an aftermarket amp to power the stereo ? This powers the speakers as well ? It sounds like it does but I have a feeling that wasn’t the intent .
Great video!
Thank you for the detailed explanation
What's the output voltage on the RCAs when at full volume? Can I safely install without a multimeter and distortion detector?
Please can you make a set up for a 2014+ impala with Bose? This is my missing link and it’s not able to connect to gm w Bose at this point
Installed the DSR-1 today. No output. 500ohms across all 4 channels for the CAN bus to be satisfied. I have Can bus communication to the device and can communicate via Bluetooth just fine. But no output..
Any thoughts or ideas? 2017 Dodge Challenger Hellcat with Harman Kardon amp.
Maestro tech support is out of ideas and I'm waiting for Rockford Fosgate to get back to me at this point.
D.J. Murphy did u ever find a solution? I thought a 100ohm resistor was supposed to be placed? Not a 500ohm
One more thing to add, its because i searched and can't find the speaker wire coming out of my stock unit, search everywhere but can't seem to find the matching colors coming out of my stock head unit
What provides the remote turn on for the aftermarket amplifier? It appears like only rca outputs go from dsr1. How does the aftermarket amp know to power on? Is there something I should look for in an aftermarket amp for compatibility with dsr1?
I would just connect the remote turn on to a fuse that only comes on when the key is in the on position
Just picked one of these up with the aFO2 t-harness for my 2015 Ford Focus ST with the stock sony system. The factory Sony system is horrendous.
Ive got 2 Audiocontrol amps going in with this, a kicker sub, and 2 sets of component Memphis speakers being installed in about a week. Im beyond excited.
How does it sound ?
I have a 2018 Harley davidson Rpad Glide , and i installed the DSR1 along with a DIAMOND amp and the entire front channel wiring harness. I bridged my 4 channel amp up front only to my 2 front fairing speakers on my bike. I'm also running the HERTZ Mille PROX 165.3 6.5' inch speakers to each speaker.
My question is about the DSR1 hookup to my bike battery. I ran the power cables thru the front fairing slot all the way down the wiring channel to the battery which is underneath my seat. My question is this:
I was told to run an inline fuse of the DSR1 and run a ground and a seperate yellow wire (+) and hook that up to my battery for the DSR1 fuse.
How do I connect skinny 18-22 gauge wires to my battery alongside my power cables which are 8AWG?
In other words, where on the battery terminal do I connect the DSR1 inline fuse wires, they are really thin!
Fused distribution block
I have a 2018 ford mustang ecoboost shaker premium 9 speaker sound system with no Subwoofer. Can I use this with my setup and can I add a Subwoofer to go with it and what channel amp do I need.
Do you have any solutions for the NEW ram 2019 DT with alpine audio system
Will this work in a 2014 Nissan Titan Pro4X with Rockford Fosgate Premium system?
I got 2012 f150 can i tap the dsr1 after the stock amplifier ? So i dont need to get the t harness ?
Does this mean I could throw away my stock Sony amp on my 15 focus st?
Yes use the DSR1 and the ADS HRN-AR-CH2 T HARNESS so it is plug and play. I just finished my 15 ST, works great.
Jeremy Paine hey so if I get both things mentioned above will it be just plug and play to a aftermarket amp? I have a Focus st ST2
You need a different harness the one he said is for a Jeep or Chrysler
Nathan Rix ok got you but what I’m asking is will i still need to run wiring of some sort or is everything plug and play after I get the correct harness?
Just throw away the entire car🤣
Gonna buy this for my mustang
Harness for VW Composition media?
What about Hyundai
Gain isn't a Volume control. Just saying. That's not how it works.
Will this work in a 2019 Dodge Charger with alpine system?