I hate that these beds are not as versatile as others. Really no cubby spaces except for one small one on the right side. Are there any narrow versions that will fit without blocking 4x8 sheets to fit in there ? Any fix exist for 4x8 sheets to have support as it hangs out past the tailgate ? being elevated on the wheelwells, do we have to make shift/McGyver something ? Maybe weld a steel knub like Colorado has to hold gate mid-height ? or anyone cut out the tail gate and create their own storage area with a closing latch like the newer colorado has ? or same but in the bed area itself like Ridgeline has (bot over to one side, as the spare is under the middle/rear area ? I'm considering a 23 Tacoma and bit sad they don't have these extra thoughtful features like Ridgeline, Colorado & Maverick have. It doesn't even have Heated steering wheel. haha. But it's Reliable, I know.
Caution: For some reason this box will NOT fit the driver's side of a 2019 Tacoma. I receive information from the company that they don't have a bracket to work on the driver's side. They didn't know if one would be made or not. I think it's something to do with not having the small storage box shown in this video on the 2019 model.
Thought this was kind of cool until I saw the price tag for something that wiggles around so much, and that involves drilling permanent holes into the bed.
That’s stupid. Self tapping screws is stupid on a moving part. You always use bolts on any moving part especially with any weight. And especially on a truck you will be bouncing around in! The screws will most definitely work loose and open those holes.
Nice install video! Seems like a lot of wasted space between the Tacoma wheel well and the Swingcase wheel well cutout. I'm assuming it's because the box is universal and the brackets are specific.
Are those S-clamps from lowering your rails for the bed cover? I have a Backflip F1 and I had to lower my rails. Want to make sure they won't conflict with the toolbox.
Trying to figure out why a large Tupperware container with a couple of mounts costs 200 bucks...
Right lol I bought some but they didn't fit. Had to send back.
My ‘21 doesn’t have a storage cubby on the driver side like this one does. What screw holes do i used them? Do i just Make my own?
I believe there is one for the passenger side as well.
Where do you get the locking Mechanism so they can’t lift it up?
I hate that these beds are not as versatile as others. Really no cubby spaces except for one small one on the right side. Are there any narrow versions that will fit without blocking 4x8 sheets to fit in there ? Any fix exist for 4x8 sheets to have support as it hangs out past the tailgate ? being elevated on the wheelwells, do we have to make shift/McGyver something ? Maybe weld a steel knub like Colorado has to hold gate mid-height ? or anyone cut out the tail gate and create their own storage area with a closing latch like the newer colorado has ? or same but in the bed area itself like Ridgeline has (bot over to one side, as the spare is under the middle/rear area ? I'm considering a 23 Tacoma and bit sad they don't have these extra thoughtful features like Ridgeline, Colorado & Maverick have. It doesn't even have Heated steering wheel. haha. But it's Reliable, I know.
I have a flip cover that has the lashes to close it down will that work for my truck
I don't have a cubby on the driver's side. Does it install differently, or do I need different hardware?
same here
Caution: For some reason this box will NOT fit the driver's side of a 2019 Tacoma. I receive information from the company that they don't have a bracket to work on the driver's side. They didn't know if one would be made or not. I think it's something to do with not having the small storage box shown in this video on the 2019 model.
Wonderful
The Sc401P will fit on the passenger side with the storage compartment if I’m not mistaken. Better read all the fine print when ordering
Do they make hardware like in the video. 2018 tacoma.
Nice vid. Just ordered some of these
It's a great product James! Make sure to share your installed photos with us on Instagram.
Anybody know the allowed weight capacity? Possible my new tool box replacement
75lb it said somewhere that I read
Will these work with bed stiffeners installed?
Thought this was kind of cool until I saw the price tag for something that wiggles around so much, and that involves drilling permanent holes into the bed.
I got a knock of from Amazon for $100. It’s not bad at all.
I sent mine back but I didn't drill any new holes. All the holes were there on the passenger side on 2020 Tacoma.
Can you fit two of them side by side?
They make em for left and right side.
Hey do these work if I have bed stiffeners?
I would also love to know the answer to your question. I have stiffeners on 2015 tacoma to keep my camper shell from flexing.
That’s stupid. Self tapping screws is stupid on a moving part. You always use bolts on any moving part especially with any weight. And especially on a truck you will be bouncing around in!
The screws will most definitely work loose and open those holes.
Do you have the swing case for 2021 Tacoma? Especially with a flush cover that uses the utility rails? Will it get in the way?
Good DYI video. Thanks
I don't want to drill...
Hi, is the swing case only available for the Tacoma ?
There is a swing case available for most truck models. Give us a call to get your truck setup with one! 623-434-5277
Nice install video! Seems like a lot of wasted space between the Tacoma wheel well and the Swingcase wheel well cutout. I'm assuming it's because the box is universal and the brackets are specific.
Are those S-clamps from lowering your rails for the bed cover? I have a Backflip F1 and I had to lower my rails. Want to make sure they won't conflict with the toolbox.
What are the dimensions of the storage space inside?
What is the dimensions? How deep and wide
these things only attract theives