3D Printed RC Boat Vanguard Marine Sea Rescue
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2022
- Spec. Vanguard Marine Sea Rescue
Hull 50cm
ESC waterproof 40a
Motor 2215 3200kv
Battery 2S Lipo 850-1000mha
Tx Futaba 3pv
Rx 4ch Corona s-fhss
Servo MG 9g
Prop FT009
Drive Shaft FT011
STL file www.thingiverse.com/thing:546...
Please subscribe to our youtube channel / @mr.rc-creator - แนวปฏิบัติและการใช้ชีวิต
Super gemacht *****
Thanks.! 😊
1:59 when the soldering fumes kick in
Отличное творчество
Скачал тоже модель
Saludos y felicitaciones excelente proyecto , buen negocio fabricar piezas y tu propia lancha
@Julian Orozco Thank you so much!!😁
Nice boat.
Thank you so much. 😊
Dang you went all out on this unit heck yeah!!
I do it because I like.🙂
Excelente, saludos desde Chile
Muchas gracias😁
Awesome boat man!
Thanks!😊
Got the same printer. Thing works great
Thanks a lot!😁
Nice build, I like all the details you put in! Also, good idea to put some carbon laminate at the seam. Cheers!
Thank you.!!!!
On the video shows it in two sections, the file is one large boat)))
First, you did an amazing job on the design and on the build. The boat looks incredible. I'm curious, I see that you've said to sake the outboards to match the hull size. What percentage would they be scaled down to if I printed the hull in the size the files are already? I cant think of how to get the proportion right without trial and error and a lot of wasted prints.
Yeah..!! You can print it now.
I know I can print it now, but what percentage is the hull compared to the motor ?@@Mr.RC-Creator
@@poomwahboogins 65 percentage
Excellent. Thank you!
Thank you so much.
6 un genio
bravo
Thanks!!😁
ติดตามพี่เลยครับ
ขอบคุณครับ ^ ^
I like it an printed one. Files are good and there were no problems. Exept the first drive.
Could you tell me your print resulutions? Thickness of the Hull and Infill? I think my boat is a little bit heavy.
@Patrick S resulutions 0.2 / Thickness 0.8-1.2 /Hull and Infill 0/ Wall 3 🙂
Reply
In the thingiverse file comments you recommend scaling down the motors to fit the hull. what if I want to scale up the hull to fit the motors? what scale factor would you recommend? I am using Cura 5.0 and plan on powering with the outboards not an inboard like in the Video.
You have to arrange all the files together as a body and expand the body to fit the motors in your cura 5.0 program.
Das Boot würde mir auch sehr gut gefallen. Was würde das den kosten wenn Du es nochmal machen würdest? Gruß Frank
Hallo Frank Ich stehe nicht zum Verkauf, tut mir leid, vielen Dank für Ihr Interesse.🙂
please put the outboard on this. or better yet, make another one and add 2.
Thanks!
Hey there downloaded the file for the boat. On the video shows it in two sections, the file is one large boat, could you upload the version as in the video in two sections? Also in the video the back is flat where the outboard mounts, can you also fix that on the thingverse file? Thanks!
Try again, I updated it.😁.
@@Mr.RC-Creator Thank you!!! One last question, how many inches is the boat in the video, the file defaults very small, for your size or 1/10 what MM what do I put for the X,Y,Z or just size up the largest by bed will do? Thanks Again!!
@@JusRc You can adjust the size as you want or 200%. 🙂
@@Mr.RC-Creator Thank you so much for all the responses, I have been looking for a good zodiac file, one last thing, for hull_2, could you make the back wall thicker? Plan on mounting a Kyosho Jackson outboard to it. Thank you Again!!
@@JusRcTry again hull 2.2.😁
Not bad
Thanks.
I really like it and would love to print it, but the print files sadly are totally out of dimensions to each other. Maybe the hull is correct, the chirs, crossbars are too small, the two engines are too big....You think there is a way to make the files again? Or would it be possible to get the CAD files and I would help out. Many Thanks
@trenspoke1 You can resize the file in the program to suit your needs before printing.
Why not having actual outboards
I didn't really have an outboard at that time. Thanks for the recommendation.🙂
very cool, is this your own design?
Hi.Norse B Thanks yes i like it🙂
Do you have the STL files for the motor steering brackets?
Let me see.🙂
hello! i am about to print this boat, is the haul printed WITH support???????? the thingaverse file says no but in the video i see you added support to print the haul properly
I don't remember but you can resize it.
do you have the files posted anywhere other than thingiverse? There seems to be a lot of stuff in the video that isn't in the files.
Link.www.thingiverse.com/thing:5461389
file is missing parts ?!
What was the print time on your b1?
It's been so long, I don't remember.😅
Hello very good job! do you have the trailer .stl file to share?
Thanks in advance!
Link e trailer .stl www.thingiverse.com/thing:3539109
@@Mr.RC-Creator thanks bro !
bonjour avez vous les stl des supports moteur svp et de l homme merci
Please, share new stl)
Link www.thingiverse.com/thing:5461389
@@Mr.RC-Creator Thanks! I didn`t see "Hulk"))) Could you explain difference between Hulk 2 and Hulk 2.2? What scale did you use for print? Thanks!!!
maybe 20 hrs or so?
Yes, maybe. 😁
BONJOUR QUEL % POUR LE MOTEUR POUR LE BATEAU QUI EST A 100% SUR UNE ENDER3 MERCI
Vous pouvez ajuster la taille selon vos besoins. Diaporama avant impression🙂
Hiya can you please post a link for where to buy the electronics? Thank you!!
You mean CR2032 Cell Battery Socket/ LED Light , right?
www.aliexpress.com/item/1005001419496742.html?spm=a2g0o.productlist.0.0.351b41102PXqaC&algo_pvid=a2d37203-b538-48e5-9be4-8b5bd2f81cc8&aem_p4p_detail=2022120918081511668016618030550001898032&algo_exp_id=a2d37203-b538-48e5-9be4-8b5bd2f81cc8-4&pdp_ext_f=%7B%22sku_id%22%3A%2212000016029151515%22%7D&pdp_npi=2%40dis%21THB%2142.39%2135.09%21%21%21%21%21%402103250d16706380959034765e85e7%2112000016029151515%21sea&curPageLogUid=lzCQSUvOtLvj&ad_pvid=2022120918081511668016618030550001898032_1&ad_pvid=2022120918081511668016618030550001898032_1
www.aliexpress.com/item/1005002059922896.html?spm=a2g0o.detail.1000014.2.7c2a17cc8xK4a5&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.281175.0&scm_id=1007.40050.281175.0&scm-url=1007.40050.281175.0&pvid=add8e975-2abe-4d48-b749-81bfc669ee66&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.281175.0,pvid:add8e975-2abe-4d48-b749-81bfc669ee66,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%7B%22sku_id%22%3A%2212000018593537168%22%2C%22sceneId%22%3A%2230050%22%7D&pdp_npi=2%40dis%21THB%21242.57%2197.03%21%21%21%21%21%4021032fa616706386915265210e4c97%2112000018593537168%21rec
Are stl files available to share?
Link www.thingiverse.com/thing:5461389
@@Mr.RC-Creator 404 page not found
@@alexsh3018 Try again.🙂
@@Mr.RC-Creator It's OK now, thank you !
I need one how much fir scale build
I don't sell, I just like to play.🙂
@@Mr.RC-Creator OK fair enough it just it would be prefect behind my land rover
@@loganthomas4636 Thank you so much!!!😁
ลำนี้ทำขายไหมครับ
ไม่ได้ทำขาย..ลองทำเล่นดู ..ครับบ
Bonjour vous le vendez ?
Je ne vends pas, merci pour votre intérêt.😁
Can I buy it?
I don't sell, I just like to play.🙂
@@Mr.RC-Creator oh so sad, thank you!
@@Mr.RC-Creator 😢😥😔 you need to sell them, they're great!
@@Mr.RC-Creator can you tell me your gmail? I'm really excited about this product
@@athuynh824 Thanks. 😁