Hola capo que numero el el tubo del tornillo del cigueñal, genio pense que le estabas dando con un torquimetro el manual dice 55nm da miedo pasarse y falsear alguna rosca
Hi there . The crankshaft pully nut has a very high torque of 210 nm or 152 lbf ft. My wrench can only go to 80 lbf ft. So I turn them just tite. Big end bearings old bolts not more than 55 Nm.
Help. What should be the clearance of the intake valves 0.25-0.30mm and exhaust valves 0.30-0.35mm or other? 2.3D XD2.Can't find books on XD2.
XD2 NA: 0,3 inlet, 0,35 exhaust. XD3 NA: both inlet and exhaust 0,3-0,35. XD3 turbo: 0,1-0,2 inlet, 0,2-0,3 exhaust.
Hallo. Set them both at 0,30 - 0,35 mm.
Hola capo que numero el el tubo del tornillo del cigueñal, genio pense que le estabas dando con un torquimetro el manual dice 55nm da miedo pasarse y falsear alguna rosca
Hi there . The crankshaft pully nut has a very high torque of 210 nm or 152 lbf ft. My wrench can only go to 80 lbf ft. So I turn them just tite. Big end bearings old bolts not more than 55 Nm.
Hello
Hola amigo si o si tengo que sacar el radiador del aire acondicionado
If the aircon does not work take everything out air conditioner related.
WhatsApp The