Making Motorcycle Headlight Brackets from Scrap ★ Scrambler / Cafe Racer Build
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Making Motorcycle Headlight Brackets from Scrap - Fitting the headlight and making some unique brackets from scrap. They turned out awesome and very industrial looking that suits this build very well I think. Let me know what you think of them in the comments below
#MotorcycleHeadlightBracketsfromScrap #CafeRacerGarage
HERE IS A LIST OF WHAT I USED IN THIS VIDEO:
Headlight - amzn.to/2QgObaU
Dremel 8220 12v Max Cordless - amzn.to/2GVxRnl
Center Punch (Spring Loaded) - amzn.to/2D2nhJe
Clamp One-Handed Clamp - amzn.to/2Jxl6l5
Cordless Drill - amzn.to/2FjsrTc
SuperJaws (Foot Clamp)- amzn.to/2FfyoV6
Angle Grinder - amzn.to/2HaDsXq
Welder- CigWeld 185 Ultra www.cigweld.co...
Dremel - amzn.to/2GVxRnl
Parts and tools I use:
www.amazon.com...
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for TH-camrs
💥💥Want me to create more content for you each week?💥💥Did know you can now become a Patreon just by making a donation! Even the smallest amount goes a long way in helping me make more videos, Every Patreon will get a personal shout-out on the channel as a big thank you :)
/ caferacergarage
=====================================================
For all commercial enquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. Want More Cafe Racer Garage Videos?
• Want More Honda and Ot...
★ 02. DIY ★ Cafe Racer/ Scrambler Hoop Bending
• DIY ★ Cafe Racer / Scr...
★ 03. DIY ★ Cafe Racer/ Scrambler Hoop Bending
• DIY ★ Cafe Racer / Scr...
★ 04. Scrambler / Cafe Racer Seat Build & Fixing the Kickstand - Cafe Racer Garage
• Scrambler / Cafe Racer...
★ 05. The Best Welder To Buy For Any Skill Level ★ MIG / TIG / STICK - Cafe Racer Builds
• The Best Welder for Be...
★ 06. How To Wrap a Motorcycle Exhaust- Scrambler / Cafe Racer Build - Ep.11
• How To Wrap a Motorcyc...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challange) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================
ALL Parts -www.amazon.com/shop/caferacergarage
HERE IS A LIST OF WHAT I USED IN THIS VIDEO:
HEADLIGHT- amzn.to/2QgObaU
CENTER PUNCH (Spring Loaded) - amzn.to/2D2nhJe
DREMEL - amzn.to/2GVxRnl
CLAMP - amzn.to/2Jxl6l5
CORDLESS DRILL - amzn.to/2FjsrTc
SUPERJAWS(Foot Clamp)- amzn.to/2FfyoV6
ANGLE GRINDER - amzn.to/2HaDsXq
WELDER- CigWeld 185 Ultra www.cigweld.com.au/product/transmig-185-ultra/
Your link for the headlight is broken, looks to have merged with dremel!
@@jarryMakes All fixed, Thank you for letting me know :) Hope you enjoyed the video brother
Wwwwww2wwwwwww222z222222
you probably dont care at all but does someone know a method to get back into an instagram account?
I stupidly forgot the account password. I would appreciate any assistance you can offer me.
@Lorenzo Jabari Instablaster =)
I would have left the brackets on the tubes alone and put the arms on the outside of them to showcase your work and build up the space between the arms and headlight with right amount of spacers on either side.
exactly this, saved me a comment :-)
Sick mate..totally sweet look for the bike, keeps the bikes appearance balanced. Just got your welder and have been fabricating in the garage since. I cannot live without my cordless dremmel, I use it every day..
Personally, building anything yourself for your motorcycle and seeing it finished and dutifully serving its purpose is an immensely satisfying experience. It bonds you to your machine. It adds artistic elements and shows the owner’s personality.
On the flip side, a bike outfitted with homemade pieces rather than approved OEM parts could be devalued and hard to sell.
C Dykhuizen so true 😁 thank you for the compliment and comments my friend
Man, you really do quality work. I'm glad you're making your own brackets.
Thank you my friend, Id like to get a Mill drill and a lathe so I can build even cooler stuff for you
Im not a big fan of cafe racers but the headlight bracket specially with powder-coating finish and minimalist looks great and robust and unique, the best thing about them is made out of leftover scrap yet brilliant indeed!
Both builds are slick sport
Been wrestling with a headlight mount, not wanting to spend the money on the ones I would actually buy vs the cheap ones. These are just the right look and I should be able to knock something out in the shop. Thanks for sharing!
Secession Cycles that was the same thought pattern I had lol
Feel free to share the final product on the Cafe Racer Garage fb page if you want. I’m glad I was able to help :)
I bought brackets... yours are cooler... I'll make some on a future bike. Great work mate!
Absolutely amazing craftsmanship and attention to details. I know it's an old clip but perfect timing
Swing the tightening tags to the inside and fab some new tags on the front to get your centres......def worth doin yo self!
looks great , by how i looked at it just move the mounts to the outside . looks like it will line up perfect
Those brackets look tough, well worth the effort! Only thing I'd do differently is tap a thread in them rather than using a nut on the other side! 👍🏻
Thank you mate, awesome idea by the way :)
Awesome craftsmanship.
After watching your videos, i am all fired up to build one scrambler myself while following your steps and methods 👌 thanks CRG 👌 keep uploading your bright ideas.. I am learning 👌
This is awesome and I love to hear this :) it inspires me to share more
I dig the headlight brackets i was thinking of making something very similar.
Thank you mate, yes go for it mate it's so fun and you will end up with something totally unique
Really love the style of the brackets. I made rearsets for a Z750 the same way years ago and its so simple but it looks great. Love this bike, it's officially my favourite CX to date.
wow that is cool. I'm very humbled, we also think the same with ore fabricating so that is also very cool as well :)
Wow. The brackets look sick. I have no skills, no tools, but you give me hope. Cheers buddy.
Thank you so much mate. we all started somewhere and we are always learning :)
Very cool, one off designs that work are what separate the true builder from the parts builder. You my friend have nailed it with those brackets. Wish you could send some of that heat my way, currently it is -5 C where I live in Minnesota.
Thank you brother, Yes Im over the moon with how they turned out :) one day I will have a mill drill and lathe to make the process quicker and cleaner (after I learn how to use them) but it just goes to show you don't need super expensive tools to create and build stuff if you just think about it, Regarding the weather, I do love the snow, Does it snow in Minnesota? living in the cold weather must be hard, its the hottest time of year for us now and im going to want a bigger fan for the garage lol our winter is not that cold only gets cold morning and night through our winter No snow here :(
Yes it snows in Minnesota! Unseasonably cold fall, put the bike away on Saturday. 😩 We have already seen a little taste of snow but it didn't stick around. Winter temps can get down to -30 C in January. Warmth is always good! LOL
@@timlindgren8264 that's crazy. i feel for you bro
Great fabrication - lovely looking mount. Was going to make the same (belated) comment as below about putting the lugs outside the fork brackets...
Fair play to ya man. Great job on the headlight bracket. If i had the hands to do it, i'd make all the parts for my bike. Well done!
Man I knew Aussie were great rockers (acdc, rose tattoo, airbourne....) but they are also huge fabricator ! Great job man. You did killer brackets !! I love them. Very creative. Unusual. Nothing compare to ebay or china brackets. Please continue to show us cool thing to create. Thank you
WOW this comment makes me want to get back to the garage to crank the music and create more stuff :) thank you so much mate.
Very cool brackets, I've made many of them and customers always love them
Looks very professional... Great man...
Hi, nice job and it looks great. They'll allways be 100% better than any expensive ones that you can buy on ebay because you made them yourself. You gave me a good idea for my cx built . thanks a lot , Gus
Thank you mate, Yes you are right, its fun to see and idea come to life even small ones like this :)
CAD Cardboard Assisted Design
100%
Fantastic job,,,,, fantastic headlight ,,,,,, fantastic music,,, Thanks
The CX is looking awesome! I'm a scrambler fan anyway. Headlight is a perfect choice. Bracket looks factory made (Better than factory!) Excellent job man! 👍
Thank you so much and yes I would agree with you on this one :) Im kinda proud of my self, It doesn't always work out the way you hope but when it does I guess you need to give your self a pat on the back :) Thank you for taking the time and leaving me a comment
Just had a thought, since you’re skilled enough to make these, you should try a custom fork brace, mudguard bracket.
You may be on to something, thank you for the idea brother :)
2 bikes, twice the fun
very true
they are great, never compared to ebay ones, good job.
You are 100% right :) thank you
Great piece of aussie fabrication son, keep it up and the colour suits it (tank), impressive!!
Thank you mate, this has made me wonder what else I could fabricate as a give away on the channel. I'm open to ideas.
@@CafeRacerGarage the world''s your oyster mate,not much you can do for a mongrel katana if you get my drift!
Headlight Brackets came out great. Only thing I'd say is you might have to drill out the part that the bolts go though and into the headlight bucket. Put some rubber grommets in and then the bolt through those, it'll isolate the engine vibrations from the headlight so the light beam isn't shacking to bad at night.
Thank you, the headlight came with some small rubber washers so I will need to test this and put bigger ones if need be, Thank you for the great comment and Idea mate :)
@@CafeRacerGarage you're welcome. I only know because my headlight bounces all over with it solid mounted.
Is a good Job
Thank you mate
Think it looks great. Built, not bought. I built my own headlight bracket for my virago,, but not as nice as yours. Live and learn.
Brice Loyd feel free to share your build on the Cafe Racer Garage page :) I love Viragos
Great work
Looks awesome dude.
nice info ...
Once you're done with the cafe and the Scrambler I hope you decide to do a European Bobber. Also I am planning on a version of these mounts for my personal bobber build
Jeff P. Hi mate, yes a bobber is on my list. I was thinking a Honda shadow would make a cool starting point.
Very talented you bro supperbb
Dude you are seriously talent and crafty. Really enjoy the videos. Been following for a long time, fell a little behind on this series so I’ve been binge watching haha
Well done 👏✔
That is soooo cheap & nasty, but it looks fantastic. Hopefully it'll be solid too. I'm quite surprised how well you're doing for so little monetary input. Nice work fella.
Looks awesome, Mate! Well done! Def better than ebay.
Knobbly Studios thank you mate, it’s always nice when it turns out better than you planned:)
Thank you for the comment brother.
Looks magic mate
Thank you mate
Really like those brackets may do that to mine.
Awesome, Glad to help :)
Looks great, really like the look of the light brackets.
Ross Fu thank you mate. It was a little different to the run of the mill brackets but I think they sure came out well 👍 thank you for taking the time to comment mate :)
head light look its imazing
PRADEEP-ENG thank you mate
Love the brackets 👌🏼
MOR093 thank you mate, they were fun to make :)
Lank cool rig bro
Love the brackets!!
Great work, really inspiring.
Well done ! sturdy looking but delicate !
Thank you mate, yes you are right it is :)
Great job, you should make these in bulk and sell 'em on Ebay. The look awesome.
It’s a good idea but it’s a lot of work and I’m not sure if it’s what I want to spend time doing at this stage. I have to spend time working on the bikes to finish them :)
Love it!!! I’m stealing the design too. Lol. Great job.
Do it :) Your not stealing my idea or design bro, you are creating your own version of the bracket and im glad I was able to inspire you to have a go at this little project :) feel free to post your build on my facebook page so I can follow along facebook.com/CafeRacerGarageAU/
Really nice fabrication there. Looks awesome.
Looks great to me.
Thank you
Looks Incredible
Dave Meagher thank you mate :)
That was a really great idea i wished that I could do that myself great job!!!
Anything is posable If you want to try, If you have any questions just ask :)
Mint!✌
Perfect headlight
Good job
I think so to :)
Hi Dan not sure how far along you are now as im a few days or so behind ..i have used a bicycle inner tube as a packer before ..just cut to length and place on fork tube if its a snug fit it wont move when you fit the brackets .gaz
They look great defo worth the time
Thank you Mikes bikes, Are you located in Australia ?
@@CafeRacerGarage no mate I'm in UK check out my scrambler build .I did a gs550
th-cam.com/video/N1ryLqsC3XI/w-d-xo.html
Nice job.thanks for the idea.this will useful to me
You are very welcome my friend, I'm glad you enjoyed it
Truly inspiring
Thank you, my friend, I appreciate the comment :)
You are amazing bro congratulations!!!!
Great Great Great that only i can say
Good job mate
Thank you mate
Love the light brackets man, looks solid af and really suits the style!
You need to collab with MCM... Id pay to see it. lol
Darrell Coy I’m not sure I know who they are But I’m always happy to Callab if I think the our audience will get something out of it 👍
great another idea for me to try on my build lol, love it
Glad to help :)
Good work brother
Thank you so much mate :)
Genius! Loving your work!
Great job man , if you are in NSW and blue mountains please let me know need some advise to finish my motorcycle project thank you Robert
Awesome work! Well worth the effort.
Thank you brother :) it was fun to make
Brilliant as always mate! You're a genius!
Nuno Cox thank you my friend I’m glad you like them, they were fun to make
And with dancing weld-moves! Well done TIGger! :-)
Bahahaha 😂🤣 I just like to keep them fun to watch and see who comments on the extra stuff I put in the videos. you are the first one to mention that so well done John :)
Do fab it’s great to watch great videos love the content
Thank you for taking the time to comment Andrew :) I will do!
Dope brackets!
Thank you mate :)
Could you have bolted the brackets on the outside of the fork tabs rather than the inside? To give the extra width instead of bending?
I did try that but it didn't work, unfortunately, I'm just a bit fussy about some things I build lol Thank you for the comment tho Ian
My thought too!
Bolt on the outside of original tabs and cut some more shims to get it straight. Once they are painted you won't see the extra shims
You really nailed that, Mate! I love my Dremel machine, too. 🏍👍🏍
Thank you Gary, It was really fun to make something like this from scratch, I should make something like this as a giveaway! If you have any ideas for something like this I can make I'm all ears, Something cool that this community would want.
Cafe Racer Garage great idea, Dan. I’d think you’d have to stick with Australia entrants for the giveaway though... due to shipping costs. Maybe a seat hoop or a headlight mounting kit? 🏍👍🏍
Gary A paying postage for a giveaway wouldn’t worry me. I think it’s worth it.
Cafe Racer Garage wow that’s generous of you, Mate...
Great video's and love the tips and tricks you give for the diy-shed-builders in this world. Of which I am one ;)! Keep up the good work
I'm glad you like the tips and thank you for your support and taking the time to leave me a comment, I always appreciate them :)
Very nicely done my friend!
Thank you brother :)
Very creative and cool idea to mount the headlight 👌🏻 I’m a new subscriber but I love the build so far!
Thank you Cory comments like this make my day and inspire me do more so thank you for taking the time to comment
Fantastic Job.
Thanx mate
Bro, great job on those! They look sweet!
thank you mate I had some fun making them :)
Nice build, where did you find your tires? I'm having trouble finding an on/off road tire for a 16" rim for my CX and my Cb650 Nighthawk builds, yours looks great !
좋은영상기대합니다.
♡
Looks great 👍🏼
Thank you
Turned out 50x better than the drawing 🤔🤔🤔🤔
Im super impressed 🤣
Keep it up!
And how's the spaghetti monster project going?
HaHaHa The Spaghetti monster is getting a little attention also, Im working on the headlight for that build (also custom made) and I will be doing something with the seat upholstery soon just to cover that foam Brat seat :)
great! really nice!
Thank you, Glad you like it :)
Keep up the great work!!
Thank you
Bad ass, dude!
Great comment, Thank you :)
Great vid, as usual. I've really gotten sucked into this build. Quick question: How come you didn't just move the brackets to the outside of your clamps instead of modding the clamps? Seems like you would've gotten the same result.
It was hard to see in the video but the measurements didn't line up to do that but now that they are made the way they are I can try that :) thank you and im glad you are enjoying the build
MORE!!! I NEED TO SEE MORE!!! I'm stuck without a garage right now & I need to feed my head!!!
Looking good Dan , nice brackets ..as said below in one of the other comments use a inner tube but from a bicycle smaller and thinner and if ya get it small enough it will fit perfect as it will expand as you fit it ..
Gary Yorke this is a very good idea and this is why I love this community, there is always awesome ideas like this one coming in to help with the build :) Thank you mate 😊
Try to keep your hands away from the ventilation holes if you can. Dremel placed them right in the place where you would grip the tool - in the worst possible position.
You are so right :)
Nice one!
Thank you mate :)
Awesome job! I love your attention to details, even tho its a budget build :) I cant wait to see it finnished! Oh.. and i think i'm your 13th Patreon?! I hope it doesnt bring bad luck lol :P
I thought I replied to this comment so I'm sorry Its a late reply, we have spoken since so I'm sure you understand, you are an awesome dude and Thank you so much :)
What you doin for indicators....?
Just use some inner tube to protect the fork !
Cyrille Lecat this is an amazing idea, thank you so much for the tip. 😊