First time I see a cerakote treatment and I really enjoyed watching explaining step by step a delicate process in order to get it right. Now we need to see the video with this barrel in action. Keep them coming.
Having applied high performance coatings for over two decades I want to commend you on your demonstration/explanation throughout the process. WELL DONE.
I guess im randomly asking but does any of you know a tool to get back into an instagram account?? I was dumb forgot the login password. I love any assistance you can offer me.
@Wilson Kingston i really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm. I see it takes quite some time so I will reply here later with my results.
Good video thanks for the tips. I use the cold process you don’t have to mix any catalyst with it and I’ve had real good luck with it but thanks for the information
I think most people are surprised when they see it done the proper way. Layering Cerakote adds a whole new dimension when done properly. Timing is critical, dry Cerakote won’t adhere properly to itself if the flash time is off.
Holy cow did they let you use the Cerakote factory shop? Some crazy nice expensive equipment in there! Nice job!, your video was very clear and thorough!
I guess some kind of tape might do, but for a real solid cover, heat shrink tubing is best for sand and bead blasting as it stays tight and will not unwind. Just pull it off before baking. Almost the same prep for Parkerizing but you let it soak in hot Parkerizing fluid, then rinse in hot water, then soak in hot oil that is allowed to cool. The oil will be impregnated into the Parkerized coating.
Couldn’t you have just added the catalyst to the paint without zeroing the scale? The program gave the total weight on the screen. No final wipe down after the blaster?
Great video, I just use the C series been my experience the baked on just rubs through anyway not ever really on the barrel but the handguard will and if you carry it a lot for hunting ( I do a lot of predator in the winter) it'll rub through around the mag well, trigger opening on your trigger finger side the safety, bolt release and mag release and when it does its bare shiny metal showing through on my factory finished baked Cerakoted rifle that's why I prefer black anodized, cpq'd and just clean with acetone and Cerakote w/ C series air dried and when it does eventually wear through it'll be just the black anodized surface peeking through in some spots and much easier to do Camo patterns with to as well as all my scopes Bipods mags I'm in the coatings industry anyway and applied all kinds different different stuff so I just set it up in my shed hang my parts with electrical wire or hangers from a 2x4 set on ladder rungs between 2 different ladders I'll do solid colors in no time keep up the great videos thx
I appreciate the feedback bNICE and thanks for watching the channel. I wasn’t going to be too particular on the barrel but shiny steel really didn’t match the setup. I don’t normally Cerakote my guns but when I do, it is usually done this way.
H and elite series cerakote does just rub off from carrying the firearm. More than likely there were issues the application itself. I messed up on quite a few projects before I got it down.
Cheers and thanks for sharing, this is very cool and informative. I was worried you didn't have a respirator on there while spraying, seeing that the catalyst was that nasty.
So basically I have everything I need to cerakote firearms. I build custom cabinets and do a small amount of metal work for a living. So I have HVLP, and sand blast cabinet, and a spray booth. All I need is a big ass container of simple green and an oven and Im good to go. My neighbors are actually getting ready to through out their old oven. I think Ill be taking it off their hands after seeing this.
Nice video! I just put up a two part series on Cerakoting at home. My equipment is a bit more cruder than yours (and yes, I am jealous lol). I wanted to do Cerakoting gun parts on my channel but already got a warning for an AR video I did (which YT took down) so am keeping my Cerakoting videos to knives and such. One quick question, Cerakote is pretty adamant about using 18:1 ratios on their Elite line, I'm assuming a slightly higher ratio doesn't impact it any? I've used elite series successfully at 18:1 and do a lot in their H series, which gives you a pretty wide latitude in your ratios. Was wondering how much runway you have on either side of 18:1 for the elite series there is. Thanks again for the great video.
That there was a professional Cerakoting job . I reckon Rick will be sanding his spray painted barrel on his Tikka TAC A1 after watching this video and will be sending to Xring for a permanent Cerakote finish real soon 😀.
I'm sure this has been asked but I would like an entry rifle just to practice with then maybe hunt with( thinking .308) but what would be a decent rifle to get. I've seen review on the remington 700 sps tactical. Get basics down then maybe either upgrade it since it is on the 700 action or just full upgrade. What would you recommend?
Great video! I do this frequently and you did an awesome job of showing and describing what goes into the process. Did you allow the elite to gas out for ten minutes before putting it into the oven or did you go directly in? Thank you again!
Depending on the desired sheen. For more gloss go into the oven immediately. For a matte finish let flash for 15 mins. You can also modify the sheen by adjusting the ratio but Cerakote does recommend 18:1 for Elite series.
it's always good to have an inline desiccant filter also to remove latent moisture from the product spray. very inexpensive, and noticable results sometimes (especially if using a cheap small compressor)
Getting new knowledge on "real" cerakoting process. Thanks X-Ring. Great video as always. Btw, just curious do you have any asian blood in the family tree?
Really enjoying your videos, my neighbors here are just boring. What is in your mix for degreasing? I’m using straight acetone and really want to change that. What else is the simple green spiked with? Or is it a secret family recipe? Thanks
nice video. great set up you have. 2 tips, you don't have to zero the scale. just add the catalyst until you get the proper total. And don't tip your gun when you get to the bottom if the stroke. tiny things, but. used to mix paint, and paint cars, if you angle the gun, the paint applies slightly different. could be a problem with touchy colors. not trying to not pick, just passing on experience
I'm wondering if when you blow off the aluminum oxide, does the air need to go through a filter or a straight compressor connection is OK? I'm also pretty sure an in-line oiler like auto and wood shops have are a bad idea.
The system that I was using was clean air through a commercial filter system. I am not a painter but was taught by guys that really know their stuff and this is how they said it should be done. That’s all I know. Thanks for the question and for watching the channel.
The oven is worth more than all of that guy at Branson Cerakote. A trick I leaned with taping off areas? Wrap the tape sticky side out so it doesn't stick to the part.
That is awesome to see it done. Not related to this video in particular I was wondering if anyone seen/shot the Howa APC in 6.5 or have an opinion on it at all?
Thanks for the response. I am looking at getting into entry level long range shooting now so shopping around and seen there sub MOA guarantees with in my budget so was curious
@@matthewcordova359 depending on your budget, Ruger makes awsome precision rifles. I have one in .223 and it is an absolute tack driver at 60 yards. I'm talking rounds through existing holes accuracy. I have heard a lot of good things of the other calibers they have it in such as, 6.5 creedmore. .308. Prices here in Canada are obviously higher that ANYWHERE ELSE in the world so I paid 1800 plus tax, but it is an awsome gun. Looking forward to stretching g it out to further distances soon.
how thick is the Ceracoat layer? I use DuraCoat instead and the thickness of it is only .001 so i never have issues with screws not fitting. I had Ceracoated guns in the shop where i had to chase the threads to mount scope bases, I never have that issue with Duracoat.
Great question Smithers Gunworks. It think it all has to do with the applicator. Cerakote measures .001 as well so the thickness should be the same as Duracoat.
I like when people question my friend who does this and Hydrographics about his price then either do it themselves or pay someone else to do it. Within weeks most are back and ask him to fix it. Once he explains why he now will charge an additional fee to do the work they always agree. Though he doesnt charge them that fee in the end the look they give as they bow their head is funny.
You have a nice paint booth and setup with the sandblasting and painting. I'm guessing you paint your own vehicles and other stuff etc. Great video. I havent painted my rifles yet but I have painted and blasted industrial and vehicles, well not blasting vehicles more like sanding well you understand.
Nice Job ! 🎨 If you wanted to camo it , would you do multi colors at the same time or in layers ??? Would it be one bake time or multi bakes ??? Can it be applied with a sponge ?... LOL😂
Good question Jerry. Many people do Camo incorrectly. Dried Cerakote does not adhere well to itself. It’s all about timing and applying stencils before the base colors and those above have fully cured. If done incorrectly the top layers can flake prematurely.
Doesn't mind getting simple green on hand putting barrel in, lifts up tray to take barrel out so you don't get simple green on your hands... why didn't you use that process to put the barrel in lol. Either way, just wanted to poke fun, great video!
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ(ไทย) vs Kenta Nishimoto(ญี่ปุ่น) รอบ 16 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/kaQRLljJkSI/mqdefault.jpg)
Thanks for the lesson on that, the hard part is getting the equipment and everything else is really pretty easy
Great! Easy, detailed and not boring to watch. Beats the other videos with just the basics. Thank you.
That explains why a quality cerakote job doesn't cost $39.99.
Exactly!!
First time I see a cerakote treatment and I really enjoyed watching explaining step by step a delicate process in order to get it right. Now we need to see the video with this barrel in action. Keep them coming.
Will do Antonio and thanks for watching the channel.
I look forward to seeing the barrel when it’s mounted on the gun. Thanks for letting us watch and learn on this process!!
Thanks Luke and thanks for watching. I will make sure to show a good view of the barrel mounted on the next outing.
This was awesome seeing all the steps and equipment that go into cerakoting
Thanks Disco and thanks for watching. .
👍👍 I had no clue the process was so involved great video. Thanks
Wow ... that was very cool to see the whole process done. Thanks for sharing Ray😁👍🇺🇸👊🦅
My pleasure JerrBear. Thanks again for watching the channel.
Excellent! Thanks for sharing the process.
My pleasure TJ
Excellent work thanks for the video
My pleasure Jeff. Thanks for watching the channel.
Great video. The barrel looks nice. Thanks for sharing the video.
Thanks Joaquin and thanks for watching.
X-Ring is X-pert in all things ! A real master of all trades . Thanks for the insight .
That might be a little bit much but I think I am well rounded. I appreciate you watching and commenting on the channel. Thank you.
Great video mate, it helps to have the right equipment for the job.
yup prep work is the most important step in any final finish done.... for example like the colt python royal blue....
Having applied high performance coatings for over two decades I want to commend you on your demonstration/explanation throughout the process. WELL DONE.
I guess im randomly asking but does any of you know a tool to get back into an instagram account??
I was dumb forgot the login password. I love any assistance you can offer me.
@Gerardo Emiliano Instablaster ;)
@Wilson Kingston i really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm.
I see it takes quite some time so I will reply here later with my results.
@Wilson Kingston it worked and I now got access to my account again. I'm so happy:D
Thank you so much you really help me out!
@Gerardo Emiliano No problem :D
Excellent job my guy. Thats nice to have top end equipment. Have a good day.
Thanks Robert and thank you for watching.
Awesome video and info. Thanks for sharing. I really like that software and getting the mixture right the first time. Thanks
Glad it was helpful! Thanks for watching the channel.
Very cool video. I've never done this so it was nice to see the steps involved. It came out nice. I like that color. Good stuff as always X-RING
Thanks Steel Punisher. Glad I could show this on the channel. Thank you and have a great week.
Great video man. Good job.
Thanks Earth Man And thank you for watching
Thanks for sharing. I like the color.
Very interesting process to Cerakoting !!!!!!!!!!
Cool video,Ray! My barrel is in the mail.
Very informative and interesting. Thanks.
Damn you’re in phenomenal shape dude I have always seen you in hoodies. I need to get on your workout program.
Great job X ...blessed to have access to all that equipment.. going to look nice on that rifle ...2 👍👍up yo..
Absolutely Jason. It is truly a blessing.
I can’t believe you didn’t let Rick at it with some Krylon. LoL. Actually it was a great video and great results 👍
Thanks Jackson and thanks for watching the process.
That is a good looking shop, reminds me of work though. I like that color, turned out very well brother!
Thanks Fumaster. It matches almost perfectly. Thanks for watching.
Nice job as cool to take us along on it....Good stuff....
Thanks Scott and I appreciate you watching.
You just sold a Skat blasting cabinet. That thing is awesome!
Terrific video - knowledge and skill. Maxwell House is "good to the last drop". Folgers "can't believe it's not fresh brewed".
He said I want to go for about forty grams because I want to, oohhh! 😂😂😂. Thanks for the video.
Good video thanks for the tips. I use the cold process you don’t have to mix any catalyst with it and I’ve had real good luck with it but thanks for the information
Wow i had no idea how intense the process was.
I think most people are surprised when they see it done the proper way. Layering Cerakote adds a whole new dimension when done properly. Timing is critical, dry Cerakote won’t adhere properly to itself if the flash time is off.
Holy cow did they let you use the Cerakote factory shop? Some crazy nice expensive equipment in there! Nice job!, your video was very clear and thorough!
In before “it’s just as good as my rattle can spray paint palmetto state AR” !! 🤭😂😂
Great job guys !
LOL! Thanks Jo Quin. I have seen good and bad Cerakote jobs for sure.
Nice work!
Thank you.
Awesome video man! More perks of the job! You are like the worlds greatest handyman! Rick should have let you cerakote his tikka lol
LOL. Thanks, but Rick really likes his spray bomb paint jobs.😂
Looks great
Thanks treesablowin, I hope you have been well.
I guess some kind of tape might do, but for a real solid cover, heat shrink tubing is best for sand and bead blasting as it stays tight and will not unwind.
Just pull it off before baking.
Almost the same prep for Parkerizing but you let it soak in hot Parkerizing fluid, then rinse in hot water, then soak in hot oil that is allowed to cool.
The oil will be impregnated into the Parkerized coating.
Great video. Thanks!!
Thanks JC and thanks for watching.
Couldn’t you have just added the catalyst to the paint without zeroing the scale? The program gave the total weight on the screen. No final wipe down after the blaster?
Great video, I just use the C series been my experience the baked on just rubs through anyway not ever really on the barrel but the handguard will and if you carry it a lot for hunting ( I do a lot of predator in the winter) it'll rub through around the mag well, trigger opening on your trigger finger side the safety, bolt release and mag release and when it does its bare shiny metal showing through on my factory finished baked Cerakoted rifle that's why I prefer black anodized, cpq'd and just clean with acetone and Cerakote w/ C series air dried and when it does eventually wear through it'll be just the black anodized surface peeking through in some spots and much easier to do Camo patterns with to as well as all my scopes Bipods mags I'm in the coatings industry anyway and applied all kinds different different stuff so I just set it up in my shed hang my parts with electrical wire or hangers from a 2x4 set on ladder rungs between 2 different ladders I'll do solid colors in no time keep up the great videos thx
I appreciate the feedback bNICE and thanks for watching the channel. I wasn’t going to be too particular on the barrel but shiny steel really didn’t match the setup. I don’t normally Cerakote my guns but when I do, it is usually done this way.
H and elite series cerakote does just rub off from carrying the firearm. More than likely there were issues the application itself. I messed up on quite a few projects before I got it down.
enjoyed that , thank u
Nice video.
Nice work bud!
Thanks Todd.
I use Teflon plumbers tape to cover the threads of a barrel to keep the Cerakote of the threads.
That would be an option as well.
nice to see you use metric sometimes for our metric guys
Excellent!😃🇺🇸👍👍
Cheers and thanks for sharing, this is very cool and informative.
I was worried you didn't have a respirator on there while spraying, seeing that the catalyst was that nasty.
Thanks Robert. I definitely have and use all of the safety gear when applying finishes.
And the good to the last drop was Maxwell coffee 😂🤣
Thanks !
You are welcome !
Nice job.
Thanks Paul and thanks for watching the channel.
So basically I have everything I need to cerakote firearms. I build custom cabinets and do a small amount of metal work for a living. So I have HVLP, and sand blast cabinet, and a spray booth. All I need is a big ass container of simple green and an oven and Im good to go. My neighbors are actually getting ready to through out their old oven. I think Ill be taking it off their hands after seeing this.
Yes you do Mav. Many many people use an oven and a spray gun to do Cerakote jobs.
That place is cleaner than Church Altar
Nice video! I just put up a two part series on Cerakoting at home. My equipment is a bit more cruder than yours (and yes, I am jealous lol). I wanted to do Cerakoting gun parts on my channel but already got a warning for an AR video I did (which YT took down) so am keeping my Cerakoting videos to knives and such. One quick question, Cerakote is pretty adamant about using 18:1 ratios on their Elite line, I'm assuming a slightly higher ratio doesn't impact it any? I've used elite series successfully at 18:1 and do a lot in their H series, which gives you a pretty wide latitude in your ratios. Was wondering how much runway you have on either side of 18:1 for the elite series there is. Thanks again for the great video.
That there was a professional Cerakoting job . I reckon Rick will be sanding his spray painted barrel
on his Tikka TAC A1 after watching this video and will be sending to Xring for a permanent Cerakote finish real soon 😀.
LoL Conservative Sniper.........NOT happening. He is in love with his Krylon.
@X-RING 😆😂
So much nice.
Us common folk
Have to make do
with
Harbor Freight sand blasters
George Foreman Grills
And
DIY solar ovens
for
Barrels
LoL! I have used some of those things a time or two. Necessity is the mother of all inventions !
I'm sure this has been asked but I would like an entry rifle just to practice with then maybe hunt with( thinking .308) but what would be a decent rifle to get. I've seen review on the remington 700 sps tactical. Get basics down then maybe either upgrade it since it is on the 700 action or just full upgrade. What would you recommend?
Great video! I do this frequently and you did an awesome job of showing and describing what goes into the process. Did you allow the elite to gas out for ten minutes before putting it into the oven or did you go directly in? Thank you again!
Depending on the desired sheen. For more gloss go into the oven immediately. For a matte finish let flash for 15 mins. You can also modify the sheen by adjusting the ratio but Cerakote does recommend 18:1 for Elite series.
Thanks for the video. What filter material are you using in your booth?
That is a crazy cool shop. Is that your garage, lol
it's always good to have an inline desiccant filter also to remove latent moisture from the product spray. very inexpensive, and noticable results sometimes (especially if using a cheap small compressor)
Ray, nice video on the process. Definitely not in your basement. Looks more like MTK's
Do you have to dump out the degreaser after every use from the dipping station?
I love to Cerakote! Lol where can I access that Cerakote program for ratios you used in excel?
If you aren’t a Certified Cerakote applicator ,no but you can find an app in the apple store that works the same way.
Getting new knowledge on "real" cerakoting process. Thanks X-Ring. Great video as always. Btw, just curious do you have any asian blood in the family tree?
Really enjoying your videos, my neighbors here are just boring. What is in your mix for degreasing? I’m using straight acetone and really want to change that. What else is the simple green spiked with? Or is it a secret family recipe? Thanks
That looks great! No more shiny barrel, lol
nice video. great set up you have. 2 tips, you don't have to zero the scale. just add the catalyst until you get the proper total. And don't tip your gun when you get to the bottom if the stroke. tiny things, but. used to mix paint, and paint cars, if you angle the gun, the paint applies slightly different. could be a problem with touchy colors. not trying to not pick, just passing on experience
I appreciate it Brett! I am NOT a painter but it was fun doing the project to my barrel. Thanks for the information and thanks for watching.
Good to the last drop is Maxwell House.
That’s right! It’s “put Folgers in your cup”!
I want to see how this product holds up to a meltdown or with hard use like chucking your rifle in the back of a pickup or something like that
how come you skipped the gas out step also why did you choose the 20:1 ratio.. 18 : 1 is the standard for E series
After all done with paint do you recommend a clear coat also to help protect like flat clear cerakote?
New name.... Earl Shive...... nice job...
LOL! I remember those commercials, and Peaches
I'm wondering if when you blow off the aluminum oxide, does the air need to go through a filter or a straight compressor connection is OK? I'm also pretty sure an in-line oiler like auto and wood shops have are a bad idea.
The system that I was using was clean air through a commercial filter system. I am not a painter but was taught by guys that really know their stuff and this is how they said it should be done. That’s all I know. Thanks for the question and for watching the channel.
What’s the container you used to clean the barrel, I like it’s simplicity
Brother, what would be the result if you paint the fire clipper or compensator without sanding or removing your bluish?
The oven is worth more than all of that guy at Branson Cerakote. A trick I leaned with taping off areas? Wrap the tape sticky side out so it doesn't stick to the part.
That is awesome to see it done. Not related to this video in particular I was wondering if anyone seen/shot the Howa APC in 6.5 or have an opinion on it at all?
Unfortunately, I have not. I haven’t had much luck with Howa rifles.
Thanks for the response. I am looking at getting into entry level long range shooting now so shopping around and seen there sub MOA guarantees with in my budget so was curious
@@matthewcordova359 depending on your budget, Ruger makes awsome precision rifles. I have one in .223 and it is an absolute tack driver at 60 yards. I'm talking rounds through existing holes accuracy. I have heard a lot of good things of the other calibers they have it in such as, 6.5 creedmore. .308. Prices here in Canada are obviously higher that ANYWHERE ELSE in the world so I paid 1800 plus tax, but it is an awsome gun. Looking forward to stretching g it out to further distances soon.
Uhhhhh Pre-cleaning oil residues I get . . . . but why decreasing with aceton, before blasting????
How long does the Elite Series of Cerakote bake and at what degrees, thanks ☺️
Is that cerakote program available on their site? Thanks
👍👍
All about friends in high places! Looks nice man! How much you charge?
Thanks Chris. I do not do this for hire unfortunately.
@@XRING
Is there a good shop you'd suggest to do this sort of work right?
Hi ! What kind of plug is this please ? What material... ? Silicone ? Thanks
how thick is the Ceracoat layer? I use DuraCoat instead and the thickness of it is only .001 so i never have issues with screws not fitting. I had Ceracoated guns in the shop where i had to chase the threads to mount scope bases, I never have that issue with Duracoat.
Great question Smithers Gunworks. It think it all has to do with the applicator. Cerakote measures .001 as well so the thickness should be the same as Duracoat.
I like when people question my friend who does this and Hydrographics about his price then either do it themselves or pay someone else to do it. Within weeks most are back and ask him to fix it. Once he explains why he now will charge an additional fee to do the work they always agree. Though he doesnt charge them that fee in the end the look they give as they bow their head is funny.
I know exactly what you mean Chris. It does take time, power and the know how to do these jobs correctly.
No need for flash off before the bake ?
You have a nice paint booth and setup with the sandblasting and painting. I'm guessing you paint your own vehicles and other stuff etc. Great video.
I havent painted my rifles yet but I have painted and blasted industrial and vehicles, well not blasting vehicles more like sanding well you understand.
Nice Job ! 🎨
If you wanted to camo it , would you do multi colors at the same time or in layers ???
Would it be one bake time or multi bakes ???
Can it be applied with a sponge ?... LOL😂
Good question Jerry. Many people do Camo incorrectly. Dried Cerakote does not adhere well to itself. It’s all about timing and applying stencils before the base colors and those above have fully cured. If done incorrectly the top layers can flake prematurely.
If I m not mistaking you where at NIC shop Oregon.
What model oven was that?
@X-RING do you have any info on that degreasing tank?
Cerakote sells it on tier website.
Is this your setup or did you have to use someone else's with the ovens and sand blaster? Either way it's an awesome setup.
That was awesome step by step video cerakote. Can you do my Glocks and rifles? I’ll pay! Thanks and stay well!
Thanks San Miguel. Unfortunately, I cannot but I thank you for watching. Have a great week sir!
Doesn't mind getting simple green on hand putting barrel in, lifts up tray to take barrel out so you don't get simple green on your hands... why didn't you use that process to put the barrel in lol. Either way, just wanted to poke fun, great video!
So you dont gas the barrel before painting ?
I have to wait till the wife isn't home to use her oven....wish I had that oven....
While I'm doing the currying, the plugs bounce every time, and so do you.
Are you in the business of doing Cerakote ? Also, what would it cost for the same work that you did ?
No sir, I am not. Just taught by a friend who really knows what he is doing. I’m guessing about 80