I bought a new carb and when putting the throttle cable with the sleeve, it won’t go in all the way, I looked inside and there’s a metal sleeve that won’t move. Any thoughts on how to proceed?
That is the overflow line to the carb…if the carb floods with gas that needs to be aimed to the ground…should be clamped into place…definitely don’t want that on your exhaust. Please make sure to subscribe. Thanks
New throttle cable needle should come inside the carb. I have purchased like 30 of these carbs. All have the needle inside. Please make sure to subscribe to the channel.
I’m sorry willing the bet either carb is getting too much fuel. It probably needs tuned. Drive fuel/air mixture screw in until it is seated. Turn out 2 1/2 turns. Adjust in or out until it is running correctly. If that doesn’t work clean carb. If that doesn’t work you may have a sticky/stuck throttle. Please make sure to subscribe. Thank you.
The carb I ordered came with one. I can post the link in the description to this video to the carb I ordered around 5:30PM central time. I will post another message responding to your message as soon as I do so. Also please do me a favor and subscribe. I post a ton of DIY and quad content.
Hey man so i have a bombardier but i have no idea what year it is i bought a carb kit. But it doesnt seem likes its the correct one. How do i find out the year cc? So i can order the correct one.
@BrokeMexicanReviews hey brothuh so on the frame it shows numbers but I ordered a carb that I can just replace it with and we start today to try and make the baby run thank you. I'll give you a heads up on what the deal is thanks.
I bought a new carb and when putting the throttle cable with the sleeve, it won’t go in all the way, I looked inside and there’s a metal sleeve that won’t move. Any thoughts on how to proceed?
Do you have IG and you can send pics? I can definitely help that way.
i thought these had pz20 but you are the expert thanks
PZ19 is stock I believe. I have never purchased a brand new one. I put pz20 or pz19 carbs on all the quads I work on. Please make sure to subscribe.
@@brokemexicanreviews forsure i did sub thank you
Should the line just hang from the carburetor ? My line just melted to the exhaust the line that comes for the carb bowl i didnt know where it goes
That is the overflow line to the carb…if the carb floods with gas that needs to be aimed to the ground…should be clamped into place…definitely don’t want that on your exhaust. Please make sure to subscribe. Thanks
Does the new throttle cable needle come inside the carb or something?
New throttle cable needle should come inside the carb. I have purchased like 30 of these carbs. All have the needle inside. Please make sure to subscribe to the channel.
@@brokemexicanreviews you are lifesaver!! The needle and barrel was inside my new carb i was flippin out😂😂 you got a new sub :)
Thank you. If you need help a lot of ppl message me on IG so they can send pics. Don’t hesitate to reach out
What would make the four-wheeler to take off without hitting the gas
I’m sorry willing the bet either carb is getting too much fuel. It probably needs tuned. Drive fuel/air mixture screw in until it is seated. Turn out 2 1/2 turns. Adjust in or out until it is running correctly. If that doesn’t work clean carb. If that doesn’t work you may have a sticky/stuck throttle. Please make sure to subscribe. Thank you.
Throttle cable needs adjusted had it happen to me after carb install
@@TheSheldon19 I haven't had that issue yet. I'm sure others have though. Thanks for the comment!
Throttle cable
@@bryanhernandez3168 hell yeah that makes sense brother
Thanks, you haved help me 😉👍
Np man. Can you make sure to subscribe. Thank you.
I need a carb that comes with the slide needle and spring where can I get one?
The carb I ordered came with one. I can post the link in the description to this video to the carb I ordered around 5:30PM central time. I will post another message responding to your message as soon as I do so. Also please do me a favor and subscribe. I post a ton of DIY and quad content.
Carb link is below or in the video description man. It is $13 and comes with fuel line, filter, and everything needed for a carb. amzn.to/3DhFynH
Yo was wondering what the next video was called that you were talking about in the end
I made this video a while back. Can you tell what video you are referring to? Also please make sure to subscribe.
Thank you 🙏
Of course. Thanks for watching. Please make sure to subscribe please.
10:32 that's what she said
😂😂😂. Mine always slides right in😭😭😭…jk but please make sure to subscribe. Also thanks for the comment.
@brokemexicanreviews 🤣🤣🤣 thanks for the videos and will do! About to swap my pz19 tomorrow
Btw could i add a pz22 carb or mikuni nv22 to my bike even tho it came with the pz19?
I usually only mess with pz19/pz20 carbs. When I work on stuff it’s usually kids stuff as it sells fast. So could not tell you for sure.
@brokemexicanreviews gotcha. So what about a pz20-22? Just to get some more airflow. Thanks bro
Msunu wa mao
What language is this? My apologies, I only speak English.
Hey man so i have a bombardier but i have no idea what year it is i bought a carb kit. But it doesnt seem likes its the correct one. How do i find out the year cc? So i can order the correct one.
Google rating plate location for yours. That’s how I’ve found vins, rating plates, etc in the past. Plate make sure to subscribe. Thanks.
@BrokeMexicanReviews hey brothuh so on the frame it shows numbers but I ordered a carb that I can just replace it with and we start today to try and make the baby run thank you. I'll give you a heads up on what the deal is thanks.
@@fernandomoreno3572 Sounds good man. Good Luck!