How to replace Front Wheel Bearing & Hub Assembly 2005-2009 Subaru Outback

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2005-2009 Subaru Outback. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2007 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2005 Subaru Outback
2006 Subaru Outback
2007 Subaru Outback
2008 Subaru Outback
2009 Subaru Outback
Tools you will need:
• 14mm Socket 1aau.to/oid/1AX...
• 17mm Socket 1aau.to/oid/1AX...
• 19mm Socket
• 32mm Socket 1aau.to/oo/1AAS...
• 1/2 Inch Impact Gun 1aau.to/oag/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/oid/1AX...
• Ratchet 1aau.to/oi9/1AX...
• Socket Driver
• Socket Extensions 1aau.to/oid/1AX...
• Torque Wrench 1aau.to/ofb/1AX...
• Brake Parts Cleaner
• Copper Anti-Seize
• Hammer
• Small Hook
• Wire Brush 1aau.to/oar/1AX...
Subscribe: / @trq
Check out our playlist:
Subaru Outback 2005-2009 2nd Generation: • Subaru Outback 2005-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@pieshka4509]

Thank you so much for saying the socket sizes and torque

[@HokeyDokieSmokie]

Do yourself a favor & don’t listen to the part of the video where she tells you to just “smack it with a hammer” to get the old bearing assembly to come off after the bolts are out. That might work for California or Arizona cars but if you live anywhere with winters & rust & where they spray mag chloride get a bearing puller. Also I’m pretty sure you need to disconnect your ABS module before starting too. This video does not show that…….. learned that the hard way

[@tomdunigan234]

This is excellent. You have helped me with so many of my vehicle repairs.

[@TRQ]

+Tom Dunigan Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@stanlysawicz9317]

You’ve probably already heard this lots, but I personally wanted to thank you for this video. It is made exceptionally well! Thank you for the clear instructions, clear socket sizing for bolts and torque specs for ALL potential hardware(talking about the brake caliper bolt torque/s). Wish more videos were like this. Thank you thank you thank you 🙏

[@bear350cid]

I've been wrenching for many years clean video, But I wished you hadn't cut it when you beat the heck out of the hub trying to get it off, you can see it was beat pretty good after you cut and took it off, People need to see that, although I know a much easier way without hitting it with a hammer. All In All Good Job, just wished you showed it all, People really need to know they can get it even if they have an issue like you did. :) Thanks

[@brianandcindy1]

The bolts will rarely be this easy. I highly recommend 6 point socket on the mounting bolts because they are very easy to strip. And separating from the knuckle also may not be so easy. In some cases it is much easier to remove the whole knuckle for easier access to drive the hub out.

[@Blinknone]

Subaru says to torque the axle nut before you put weight on the wheel.

[@toddz28]

Where do you buy the anti seize spray

[@robbroy]

Awesome video thankyou ❤️

[@peddymc1]

Thanks, the clearest and most straightforward video I've seen on how to do this. Good work 👍🏼

[@poulimagalei9709]

Great Video! Pls need your help as to what specific tools I would need to buy in order to complete this task. I like that tool that makes a sound when you tighten screws or lug nuts.

[@brianknop5191]

Excellent video, doing it right, and right to the point

[@mr.crowley6989]

Very helpful thank you

[@TimothyTAikey]

Good video you know your stuff girl ❤

[@electroverb]

Very helpful, thank you!

[@jeremywheeler1354]

Do you need to get an alignment after taking loose the outer tie rod end?

[@Blinknone]

Yes you do.

[@rhettmichael9260]

Thank you so much...

[@terryelliott9016]

Great video

[@MrSillers26]

Nicely done

[@lalnunmawiahlualngo484]

❤

[@sov19871987]

Was able to do it myself, thank you!!!

[@TRQ]

+sov19871987 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@misaelhernandez9790]

Best video online. Thank you.