Thanks for the video. Bought my 5 year old a x-pro 125 atv. After less than 3 hours on it, the clutch went. I had to wait 2 weeks for the clutch tool to come. So I recommend ordering it with the clutch.
Great little video buddy! Strong work! Only question i have is how to adjust that clutch, I had the adjustment screw all the way in. Now with a new clutch in there, do I just back that puppy off a tad? Thank you
It’s been awhile since I’ve done one, i can’t remember if they’re the same as an old Honda motor or not. Honda’s you turn counter clockwise until you feel tension. Once you feel tension, turn it clockwise 1/8 of a turn and that’s it. I would try the Honda method first as these engines are Honda clones, if it doesn’t work, try turning it clockwise till you feel tension, then back off 1/8 of a turn.
Thanks for the video. I bought our granddaughters a Coolster 125 four wheeler for Christmas a couple years ago. They rode it a lot. It sat up for five to six months. Battery died, carburetor clogged up so I took it to a Ace Hardware that sells them and got it running. New battery new carburetor. Technician said it wouldn’t shift into gear and they could not / did not want to get into the repair. The 4X4 is like new and well cared for except for setting up all those months. Any idea on what the shifting issue could be. I’m mechanically inclined, and can most likely fix if not to difficult.
Hi, do you know why after replacing the clutch the back wheels will not move when I push the bike , when I push backwards they turn but forward seemes locked. Everything works fine when driving.
I have a 4 wheeler exactly like that one.. but I can't tell in which gear is and won't turn on because is not in neutral. What can I do to fix this issue.. will replacing the clutch fix the issue?
Mayito 88 if the fourwheeler shifts gears ok, just try switching through the gears and try starting it in each one. If it doesn’t start, your problem isn’t because it’s not in neutral. You can also find neutral by rolling the fourwheeler. If the wheels turn freely and you are able to push it without the rear tires skidding, you’re in neutral. If it rolls easily, and still won’t start, you have other issues, like a bad solenoid.
@@TynkaTyme the 4 wheeler don't shift in any gear and also the tires don't move... I already replaced the electrical.. it was working before...my kid told me he was trying to shift when the 4 wheeler got stock in high throttle. Probably that damage the clutch right? 🤔
Mayito 88 probably not clutch related. I’d take your clutch cover and clutch off and make sure your shift shaft is moving the shift drum like it should
My son has a 125cc toatoa go kart. It works great in the forward gears but grinds badly in reverse. Would replacing the clutch fix that issue? Very helpful video you made.
We’ll unfortunately I don’t have my Chrystal ball with me, but if I had to guess I bet ur shift lineage is out of alignment and it’s not fully catching reverse, making it grind
Mine starts acting up after ~30 minutes of riding. Symptoms are close to no power in forward gear but reverse always has plenty of power. Problem goes away after cool down. Clutch? I was told could also be rear axle bearings. Idk. Would like to hear your thoughts.
I recently had one doing the same thing, reverse was fine, but no power in fwd. replaced the clutch and fixed the issue. Be sure you’re running an oil that is suitable for wet clutch operation. Should say it on the bottle.
need size for 125cc cheetah tao 2012 i got ine for free got her running and everything just need a new clutch kr how to adjust it cause it drives also think put and hand shifter
Wendy Handley use an impact and hold the clutch still with your other hand and the impact will spin it right off as long as you bent the locking tabs out of the nut
@@TynkaTyme Yeah, It seems to run fine. Accept from the part when i get onto it from a standstill it takes a good 5 seconds to get moving and then gets going. Not sure if that would be related to the problem but that’s something that has been going on with it.
I have a 125cc 2010 coolster tab and when I turn it on it will go fast for like 10 minutes and when I turn it off and ride it again alter it will barely even move in drive but in reverse it goes fast
Great video - Thank You ! Does anyone know how i could attempt to fix/rebuild the clutch (vs replace) ? Also, on my 2nd ATV, what could I do preventative care or maintenance to make it last longer ?
Ali Asghar clutch assemblies are 20 dollars, so i would just rather put a brand new on than go through the hassle of finding all the parts and tearing the old one apart. Just keep oil changed, air filter clean, and valves in spec.
@@TynkaTyme Thank you. My biggest issue is sourcing parts, no as free flowing and quick to be delivered in Toronto, Canada. I agree with you though. BTW, Valves in spec ? How (if there is any video you can point me to) ? Once again, thanks and keep up the good work ! ... and also, stay safe please :)
Ali Asghar watch one of my first videos where i do a top end rebuild i think it’s part 3 where i show you how to adjust valves. I usually use amazon, eBay, or Vmc Chinese parts.com for all my parts . Thanks for watching the videos and subscribing! I’ll keep them coming!
Thanks for the video. Bought my 5 year old a x-pro 125 atv. After less than 3 hours on it, the clutch went. I had to wait 2 weeks for the clutch tool to come. So I recommend ordering it with the clutch.
this was very helpful. I'm going to get a new clutch, gasket & that special socket on order so I have it when we need it.
One more uga duga did it. I gotta fix one like this for my son he’s had for many years. Thanks for showing how to do it.
Josh Brekke thanks for watching josh! Too many uga dugas can be dangerous. Just the right amount is perfect!
Ha ha, exactly! What type of oil is used so I make sure I put the right stuff in?
Josh Brekke 10w-40 make sure it’s suitable for wet clutches. Should say on the bottle. I run yamalube 10w-40 in all my machines
Ok nice, if and when I buy a new clutch should it be soaked in that oil? If so how long do you recommend?
Josh Brekke that helps longevity of the friction plates. I didn’t personally do it, but highly recommend soaking them overnight
Thank you.
Very helpful.
Add more content please.
Great little video buddy! Strong work! Only question i have is how to adjust that clutch, I had the adjustment screw all the way in. Now with a new clutch in there, do I just back that puppy off a tad? Thank you
It’s been awhile since I’ve done one, i can’t remember if they’re the same as an old Honda motor or not. Honda’s you turn counter clockwise until you feel tension. Once you feel tension, turn it clockwise 1/8 of a turn and that’s it.
I would try the Honda method first as these engines are Honda clones, if it doesn’t work, try turning it clockwise till you feel tension, then back off 1/8 of a turn.
I got to have one of those impact screwdrivers. Nice.
They suck
Thanks for the video. I bought our granddaughters a Coolster 125 four wheeler for Christmas a couple years ago. They rode it a lot. It sat up for five to six months. Battery died, carburetor clogged up so I took it to a Ace Hardware that sells them and got it running. New battery new carburetor. Technician said it wouldn’t shift into gear and they could not / did not want to get into the repair. The 4X4 is like new and well cared for except for setting up all those months. Any idea on what the shifting issue could be. I’m mechanically inclined, and can most likely fix if not to difficult.
That’s a bad ass screw driver!
Hey do you know how to adjust the clutch? Mines wearing out and needs to be tightened
i’ve seen some clutches have a pin with a spring that you out into the middle the rod that the clutch goes on. Is this on all the clutches?
Where did you get the clutch and whats the size
Amazon. I paid $35
Hi, do you know why after replacing the clutch the back wheels will not move when I push the bike , when I push backwards they turn but forward seemes locked. Everything works fine when driving.
Clutch needs adjusted
@TynkaTyme I did loosen it all the way , still nothing, is it maybe because it's new or slightly thicker??
Not sure if it’s my clutch but it runs and drives After it warms up it starts acting like it’s kicking in and out of gear is that the clutch?
would this work on the Coleman 125 atv?
A friend of mine just bought a quad for his daughter and it won’t move are these clutches adjustable?
Comment part 2:
You should do a clutch adjustment video.
I have a 4 wheeler exactly like that one.. but I can't tell in which gear is and won't turn on because is not in neutral. What can I do to fix this issue.. will replacing the clutch fix the issue?
Mayito 88 if the fourwheeler shifts gears ok, just try switching through the gears and try starting it in each one. If it doesn’t start, your problem isn’t because it’s not in neutral. You can also find neutral by rolling the fourwheeler. If the wheels turn freely and you are able to push it without the rear tires skidding, you’re in neutral. If it rolls easily, and still won’t start, you have other issues, like a bad solenoid.
@@TynkaTyme the 4 wheeler don't shift in any gear and also the tires don't move... I already replaced the electrical.. it was working before...my kid told me he was trying to shift when the 4 wheeler got stock in high throttle. Probably that damage the clutch right? 🤔
Mayito 88 probably not clutch related. I’d take your clutch cover and clutch off and make sure your shift shaft is moving the shift drum like it should
@@TynkaTyme will do that.. thanks a lot for your help... Hopefully that fix the issue.
So me and my wife got m our kids one of these and when you put n it in gear that thing just spins.. Do you think this is the problem with ours too
What thing spins?
My son has a 125cc toatoa go kart. It works great in the forward gears but grinds badly in reverse. Would replacing the clutch fix that issue? Very helpful video you made.
We’ll unfortunately I don’t have my Chrystal ball with me, but if I had to guess I bet ur shift lineage is out of alignment and it’s not fully catching reverse, making it grind
Is this a semi or full automatic clutch.
Thank you for your video .
I've oil leaking at the stator side
Can you advise or help please?
Crank seal behind flywheel
Mine starts acting up after ~30 minutes of riding. Symptoms are close to no power in forward gear but reverse always has plenty of power. Problem goes away after cool down. Clutch? I was told could also be rear axle bearings. Idk. Would like to hear your thoughts.
I recently had one doing the same thing, reverse was fine, but no power in fwd. replaced the clutch and fixed the issue. Be sure you’re running an oil that is suitable for wet clutch operation. Should say it on the bottle.
I have a new 2021 tao and the clutch makes a rattling sound when taking off is that normal
I had to replace that uga duga lol thanks i think i need one
What size clutch tool did you get? I see different sizes on Amazon.
need size for 125cc cheetah tao 2012 i got ine for free got her running and everything just need a new clutch kr how to adjust it cause it drives also think put and hand shifter
You nice guy thanks
Good explain
I bent the locking tabs out and that nut absolutely wont move at all. Any tips
Using an impact?
@@TynkaTyme yes! I even tried beating it with the hammer and the damn thing won't budge.
@@williamconyers9309 maybe add some heat
Is this the same as the RPS 125cc atvs?
Hey fella, I'm pretty sure I have the same wheeler, does yours have forward and reverse? Also what " tooth " did you need to order
17tooth
Do you/can you adjust the clutch?
Hi, when you installed the new gasket that goes between the case and the cover did you install it dry or with gasket sealant?
It’s personal preference, i do mine dry, some people use sealant as well, either way works.
Could this be the problem my won’t drive front and back? Like it turn on but it won’t drive/move.
Yes, or your output shaft is broken (which is the front sprocket)
Good video 👌👍😀
We tried to remove clutch like this, however our clutch keeps spinning when using the tool, how do we stop it from spinning to get nut loose?
Wendy Handley use an impact and hold the clutch still with your other hand and the impact will spin it right off as long as you bent the locking tabs out of the nut
2:25 what’s the name of that arm I need to find one I’ve been looking for months on Amazon I can’t find it anywhere
Did you ever find the name of the arm? I’m looking for one as well. Mine was bent to shit
My chinese atv has about 700 miles on it and ive never changed that clutch before. should i?
If it’s not giving you any problems, i wouldn’t worry about it
@@TynkaTyme Yeah, It seems to run fine. Accept from the part when i get onto it from a standstill it takes a good 5 seconds to get moving and then gets going. Not sure if that would be related to the problem but that’s something that has been going on with it.
@@dari3x374 sounds like clutch is slipping then if it takes it awhile to get going
@@TynkaTyme yep kinda what I thought as well.
Hi
I bought a new 110cc atv , its reverse is very powerful but it's drive is very weak .
Can u please help me out😭
I'm here for the same reason. Were you able to get things resolved?
How many splines was the clutch?
This was awhile ago, but believe it was 17 tooth
What’s the actual name of the arm
On 2:17 what is that first black leaver u took off I can’t find it help!!!!
Are u looking for a replacement? Or you can’t find it on your engine?
@@TynkaTyme replacement I need a new one mine bent i can’t find it anywhere
I have a 125cc 2010 coolster tab and when I turn it on it will go fast for like 10 minutes and when I turn it off and ride it again alter it will barely even move in drive but in reverse it goes fast
Clutch worn out
What oil did you use?
I Always use yamalube 10w-40
Where can u order a new clutch man ?
Oscar Vazques amazon, eBay, or vmcchineseparts.com
The cluch grinds putting in reverse and downshifting from 3rd
And how many teeth does it have
I put in a new clutch and now the the shift stick won't move and it still acts like it has no power. Any idea what I did wrong?
Try filling it up with oil? Maybe the clutch was stuck when it is in neutral?
Same. Mine has no power front or back
Great video - Thank You ! Does anyone know how i could attempt to fix/rebuild the clutch (vs replace) ?
Also, on my 2nd ATV, what could I do preventative care or maintenance to make it last longer ?
Ali Asghar clutch assemblies are 20 dollars, so i would just rather put a brand new on than go through the hassle of finding all the parts and tearing the old one apart. Just keep oil changed, air filter clean, and valves in spec.
@@TynkaTyme Thank you. My biggest issue is sourcing parts, no as free flowing and quick to be delivered in Toronto, Canada.
I agree with you though. BTW, Valves in spec ? How (if there is any video you can point me to) ?
Once again, thanks and keep up the good work ! ... and also, stay safe please :)
Ali Asghar watch one of my first videos where i do a top end rebuild i think it’s part 3 where i show you how to adjust valves.
I usually use amazon, eBay, or Vmc Chinese parts.com for all my parts .
Thanks for watching the videos and subscribing! I’ll keep them coming!
@@TynkaTyme Thank you Sir.
How many teeth is it so i can know which one to buy for mine. Because ther is 17 and 18 teeth
You would have to pull your clutch off and count the teeth on the gear that the clutch fits on to find that answer out.
Ok thanks
Is this for all 125 cc for the Tao Tao
Should be all the same unless it has an actual clutch lever at the handlebar it might be a little different