So using this MJCC foam cannon now for a month and one thing i do notice is it consumes so much more soap than my MTM or Griots cannons. Anyone else notice this? Obviously by design this was created for more foam without considering less consumptions. Gotta use this cannon faster to go around your cars.
Even if you turn down the soap dial to low? I use an MTM second model and really like it. However the MJJC has me interested. Some say the foam dries on hot days when using the MJJC and not with the MTM. I would think it has to do with how quickly someone works on hotter days.
Can confirm! Just used my side by side with my mtm. Normally 250ml of solution gets me around the car. Today the mjjc ate that up in less than 3/4of the car.
Hawaiian Detailing says the v2 plastic on the bottle is cutting board like material which is more durable than the 3.0. Just ordered a v2 pro, we’ll see how it compares to my Mtm
Awesome results and review. I write the company on 5/15/2023 just to ask if a PRO 3 version was going to be released and they did write back: "Your question: Is a MJJC Foam Cannon PRO V3 in the works and due to be released? I only ask because I just bought the new MJJC Foam Cannon S V3.00 and would sell it and wait for the new PRO 3 version. Thanks. Answer: Pro V3 will be available probably in September 2023. Thank you." end email. I have no idea what it'll look like. Again, awesome review.
You should try the MJJC Foam Cannon Pro V2 as well love mine. I did get mine for 50USD here in Sweden with a KEW quick connect. Did also get 2 extra bottles for 10 USD/pce. The MJjC will in general consume more product compared to other foam cannons
Its really impressive do you happen to know what they did in their design versus others on the market i wish they emphasized any innovations for us to know about
@@autofanaticcars IMJOSHV did a review on the MJJC v2 versus the newest version you have now and he said there’s a 3 piece filter system inside on the v2 that contains a steel mesh, foam mesh, and another piece of steel mesh. This seems like the biggest difference to produce thicker foam.
The new threaded attachment to the bottle is an improvement over the V2 Pro model but they are pretty much identical for the cannon itself. I’d say the Pro V3 will have that same thread attachment with the same style bottle of the Pro V2. Comparing them both side by side they pretty much produce the same level of foam but the pro has the better bottle with the V3S the better threaded attachment.
I got one of these. It’s freaking mint. But be carful with that bottle. It’s rly weak. Doesn’t handle hot water very well. Mine melted but luckily they warrantied it for me and sent me a new one. 👍🏾
Just by looking with the clear plastic if it falls seems it would break easily versus the plastic material of the others including the same MJJC v2 which is more sturdy. Definitely also by looking the foam it makes even when it was set to more watery, it delivers lots of foam. Man, that really delivers lots of it. Really innovative with the clear bottle.
Just take my money lol I have an mtm pf22.2 and just recently bought the clear $18 clone of this cannon. I do plan on buying one of these down the road
Ive tested every foam cannon with 100% soap and 2-4oz and saw no difference. In this video i used 3oz soap to foam car and 2oz of wheel cleaner to do all four wheels and tires. Don’t forget i have a professional pressure washer not some $99 toy
@@autofanaticcarsthat’s an important difference people forget about. They see you’re results then complain about the cannon or soap when they don’t get the same results with their 1.2 gpm machine.
I’m not a fan of how all the new foam cannons are going to wide mouth bottles. With the older small mouth one like the pf22 you can use other bottles with a similar thread. I found the smart water bottles work great. I can have different bottles for different soaps in a variety of different sizes and they all have caps. The smart water bottles are also in the bullet style, I think that’s what it’s called, like your product bottles that are all the rage right now. Adams and Chemical guys bottles also work.
@@Tanner_Teves the original v1 cheap ones definitely don’t produce the same amount of foam, but I’m hearing the v2 & 3 use a lot more soap to get it. If the original bottle breaks don’t bother buying one from them. I just use smart water bottles. They work great. I have different bottles for different soaps in a variety of different sizes and all the bottles have caps. Adams and Chemical guys bottles also work.
This cannon is amazing but don't make the mistake I made by using a 3000-psi pressure washer. It will blow out the O-rings after about 8 to 10 uses. I know dumba.. mistake, but I learned the hard way right..
Are you still using that northern tool pressure washer in this video? I really want to get it but they changed the cart it comes on and it doesn't have room for a hose reel.
Yes i use the pressure washer almost daily it’s unstoppable. No idea why they changed the cart on them but you can still attach a reel you just need to make a bracket
yes for sure that is why I preach to everyone to invest and spend the most they can on a real pressure washer not those $99 toys and then they expect to get real pro results which is not happening. If your serious about detailing this is the #1 investment to make.
Hi, When I use foam cannon do I have to run water through it with pressure washer or turn off the water just use pressure washer to push the foam cannon soap out? Thanks
@@autofanaticcarsI just wanna record my car washes my office cleaning my building cleanings and stuff like that I don’t wanna show my self I just wanna record what I’m doing in short videos I just like the way your angle what you’re doing post links if you got camera mounts let me know if you’re using your iPhone I’m not trying to compete with nobody
@@autofanaticcars the foaming is just as good for sure, the bottle seems to be there "new thing added" skinnier bottle being more tippy and possibly thinner material
The S 3.0 isn't supposed to be better. S is MJJC's mid tier line. Hence they intentionally made it have a slim bottle that falls easier. The head is identical to the pro v2
There was no need to do four coats of foam on the wheels one was enough and u could tell is thick u just over done it by going on it over and over again i bought it anyway but no one is gonna do fifty coats of snow foam one is enough and is still thick less waste of prodouct
@@autofanaticcars I got 2 of the previous version, looks different but same foam quality if you have them buy one get the previous version gonna be more cheaper Amazon send me 1 got lost in the way , sent other one, and the lost one got home few days later so, got 2 and just paid for 1! Im a freaking lucky son of a gun dud
MJJC Foam Cannon Pro V2.0 is better. The plastic bottle on this one is too thin and too pliable. It's going to wear out well before the far beefier Pro 2.0 will.
So using this MJCC foam cannon now for a month and one thing i do notice is it consumes so much more soap than my MTM or Griots cannons. Anyone else notice this? Obviously by design this was created for more foam without considering less consumptions. Gotta use this cannon faster to go around your cars.
Even if you turn down the soap dial to low? I use an MTM second model and really like it. However the MJJC has me interested. Some say the foam dries on hot days when using the MJJC and not with the MTM. I would think it has to do with how quickly someone works on hotter days.
I thought it was just me. I use the Pro V2. It really consumes a lot of shampoo. Probably 2x the amount of a regular foam canon.
Can confirm! Just used my side by side with my mtm. Normally 250ml of solution gets me around the car. Today the mjjc ate that up in less than 3/4of the car.
I have the MJJC V2 and it produces foam exactly like yours. Have used it for the past year and don't plan on changing it any time soon. Nice review!
Thanks for sharing
Hawaiian Detailing says the v2 plastic on the bottle is cutting board like material which is more durable than the 3.0. Just ordered a v2 pro, we’ll see how it compares to my Mtm
Awesome results and review. I write the company on 5/15/2023 just to ask if a PRO 3 version was going to be released and they did write back:
"Your question: Is a MJJC Foam Cannon PRO V3 in the works and due to be released? I only ask because I just bought the new MJJC Foam Cannon S V3.00 and would sell it and wait for the new PRO 3 version. Thanks.
Answer: Pro V3 will be available probably in September 2023. Thank you." end email.
I have no idea what it'll look like. Again, awesome review.
It’ll probably have the same style bottle as the Pro V2 only with the new threaded attachment as the V3S. If it ain’t broke don’t fix it.
Pretty impressive, thanks Phil !!
Glad you liked it!
About to order mine on Amazon. Thanks.
You should try the MJJC Foam Cannon Pro V2 as well love mine.
I did get mine for 50USD here in Sweden with a KEW quick connect. Did also get 2 extra bottles for 10 USD/pce.
The MJjC will in general consume more product compared to other foam cannons
I thought it’s just me who’s experiencing this, They do be consume more product
The MJJC foam cannon is a must!
Its really impressive do you happen to know what they did in their design versus others on the market i wish they emphasized any innovations for us to know about
@@autofanaticcars IMJOSHV did a review on the MJJC v2 versus the newest version you have now and he said there’s a 3 piece filter system inside on the v2 that contains a steel mesh, foam mesh, and another piece of steel mesh. This seems like the biggest difference to produce thicker foam.
The new threaded attachment to the bottle is an improvement over the V2 Pro model but they are pretty much identical for the cannon itself. I’d say the Pro V3 will have that same thread attachment with the same style bottle of the Pro V2. Comparing them both side by side they pretty much produce the same level of foam but the pro has the better bottle with the V3S the better threaded attachment.
I got one of these. It’s freaking mint. But be carful with that bottle. It’s rly weak. Doesn’t handle hot water very well. Mine melted but luckily they warrantied it for me and sent me a new one. 👍🏾
Good to know that I don’t use hot water but others might thanks for sharing
I can’t think of anyone who uses hot water
satisfying
Just by looking with the clear plastic if it falls seems it would break easily versus the plastic material of the others including the same MJJC v2 which is more sturdy. Definitely also by looking the foam it makes even when it was set to more watery, it delivers lots of foam. Man, that really delivers lots of it. Really innovative with the clear bottle.
The bottle seems to be made from PVC or PTFE most cannons use HDPE we will see how this one holds up to dropping
Yeah I'll keep my v2 pro
Just take my money lol I have an mtm pf22.2 and just recently bought the clear $18 clone of this cannon. I do plan on buying one of these down the road
This cannon really impressed me
would love to see a video or clip of the ratios of chemical to water for this specific foam cannon
This video was done with 3/4 water in reservoir and 2 oz of our Auto Fanatic 007 Snowstorm Shampoo
Phenomenal video mate. Can i ask what sort of camera you are using? It is so crisp it made me subscribe straight away!
New GoPro in 4k/60
It also makes a difference on how much soap you put into the bottle.
Ive tested every foam cannon with 100% soap and 2-4oz and saw no difference. In this video i used 3oz soap to foam car and 2oz of wheel cleaner to do all four wheels and tires. Don’t forget i have a professional pressure washer not some $99 toy
@@autofanaticcarsthat’s an important difference people forget about. They see you’re results then complain about the cannon or soap when they don’t get the same results with their 1.2 gpm machine.
I’m not a fan of how all the new foam cannons are going to wide mouth bottles. With the older small mouth one like the pf22 you can use other bottles with a similar thread. I found the smart water bottles work great. I can have different bottles for different soaps in a variety of different sizes and they all have caps. The smart water bottles are also in the bullet style, I think that’s what it’s called, like your product bottles that are all the rage right now. Adams and Chemical guys bottles also work.
I just got mine from Amazon
Great review. I find all them way too expensive when you can get a real cheap version that does exactly the same, like $20 on any online shop.
Except those $20 ones don’t produce nearly as thick of foam. Not to mention they can break easily or the threads can easily be cross threaded.
@@Tanner_Teves the original v1 cheap ones definitely don’t produce the same amount of foam, but I’m hearing the v2 & 3 use a lot more soap to get it. If the original bottle breaks don’t bother buying one from them. I just use smart water bottles. They work great. I have different bottles for different soaps in a variety of different sizes and all the bottles have caps. Adams and Chemical guys bottles also work.
It doesn’t make foam, just soapy water
How many PSI on the compressor?
This cannon is amazing but don't make the mistake I made by using a 3000-psi pressure washer. It will blow out the O-rings after about 8 to 10 uses. I know dumba.. mistake, but I learned the hard way right..
Sounds like you had a defective one i use this almost daily with my industrial pressure washer which ranges from 1200-3500 psi never an issue
@@autofanaticcars Oh wow. You may be right then. Thanks
What camera and what camera mounts are you using? Please post links thanks
Are you still using that northern tool pressure washer in this video? I really want to get it but they changed the cart it comes on and it doesn't have room for a hose reel.
Yes i use the pressure washer almost daily it’s unstoppable. No idea why they changed the cart on them but you can still attach a reel you just need to make a bracket
Also remember a lot of this has to do with the pressure washer being used.
yes for sure that is why I preach to everyone to invest and spend the most they can on a real pressure washer not those $99 toys and then they expect to get real pro results which is not happening. If your serious about detailing this is the #1 investment to make.
100% a 1.2 gpm machine will never give results like this.
Hi,
When I use foam cannon do I have to run water through it with pressure washer or turn off the water just use pressure washer to push the foam cannon soap out? Thanks
You still run water through the pressure washer
So sorry forgive my ignorance, what do I need to mount a camera like what you did in this video? Are you using the GoPro camera or your iPhone?
All my camera mounts I custom make for my videos. What are you trying to accomplish exactly?
@@autofanaticcarsI just wanna record my car washes my office cleaning my building cleanings and stuff like that I don’t wanna show my self I just wanna record what I’m doing in short videos I just like the way your angle what you’re doing post links if you got camera mounts let me know if you’re using your iPhone I’m not trying to compete with nobody
Wow! Is that attached to a power washer? I don't hear the typical noise a power washer makes. Curious what you're using to "power" the foam cannon.
Yes i have a professional electric pressure washer in my garage thats why you don’t hear it
@@autofanaticcars Gotcha. Did you do a review of that yet? Got a link?
Yes checking my channel for my reviews on my North Star pressure washer rig best investment i ever made
@@autofanaticcars Found it. Thanks! 🙂
What do I set my compressor at?
this is using a pressure washer with 1800 pSI and 2.5 gpm flow
I just realized that after watching another video. Thank you for responding.
So you dont have the mjjc v2 pro?? Not sure this new version can beat it
Nope this is what they sent me to test out I don’t think performance can get any better than what I demonstrate here
@@autofanaticcars well you can't go wrong with that 👊
@@autofanaticcars the foaming is just as good for sure, the bottle seems to be there "new thing added" skinnier bottle being more tippy and possibly thinner material
The S 3.0 isn't supposed to be better. S is MJJC's mid tier line. Hence they intentionally made it have a slim bottle that falls easier. The head is identical to the pro v2
the S 3.,0 is pricey if it is their middle tier model but i think it performs excellent overall. the bottle may be the weak point long term for sure
What is the size of the orifice?
This is demonstrated out of the box it does include an extra orifice for lower GPM pressure washers
3.0
Oh man I need one ☝️ 😂
Order and use discount code in video description
@@autofanaticcars just got one ☝️ thank you
Tf u talking about of course it's available on Amazon I'm looking at it right now
Are you washing that car or shaving it?
both ha ha ha
THE cheap ones do not work anywhere near the MJCC I tried others and nothing works better
mega foam 007
Hell yeah
There was no need to do four coats of foam on the wheels one was enough and u could tell is thick u just over done it by going on it over and over again i bought it anyway but no one is gonna do fifty coats of snow foam one is enough and is still thick less waste of prodouct
Demonstrating the foam cannon hello!! This is what viewers want to see compared to all other cannons
Just put a 1.1 mm orifice canon and save your self a ton
Depends if you want to risk increased back pressure and messing up your motor and seals
Except if you drop it it shatters!!!!!!
Same foam quality than the previous version
First time i ever tried one from this brand its impressive
@@autofanaticcars I got 2 of the previous version, looks different but same foam quality if you have them buy one get the previous version gonna be more cheaper Amazon send me 1 got lost in the way , sent other one, and the lost one got home few days later so, got 2 and just paid for 1! Im a freaking lucky son of a gun dud
Now upload the uncut version of this video
Trolling but your welcome to make your own video to share. Editing is to reduce video length otherwise low attention span types cannot handle it.
MJJC Foam Cannon Pro V2.0 is better.
The plastic bottle on this one is too thin and too pliable. It's going to wear out well before the far beefier Pro 2.0 will.
Good morning maing 🦾🧤🦾🧤🦾🧤🦾🧤🖲️🖲️🧲🛠️⚒️🔧🪛🔩⛏️⚙️
Second
A hundred dollar foam cannon? You're joking right?
Nobody forcing you to buy it
@@autofanaticcars
Kinda missed the point there dude
Some people make thousands with a foam cannon!
They are amazing tools
A foam cannon half that price works just that great!
First!!!