Ford Escape Rear Back Seat Removal Simple & Easy
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- In this video we're looking at Ford Escape back seat removal! For this Ford Escape back seat removal we're gonna need just a few tools - a torque bit T50, an 3 inch extension and a deep well 15mm socket! Luckily we don't need a ton of tools for this Ford Escape back seat removal. Doing a Ford Escape back seat removal is easy and fast as theirs not too much in to it. But we'll go over everything it takes to remove the back seat in your Ford Escape. We cover it all in our Ford Escape back seat removal guide!
More Ford Escape Tips n Tricks!
Things you Can Check at Home if your Ford Escape Won't Start: • Possible reasons your ...
Ford Escape Rusty Shock Tower Screw and Glue Method: • Ford Escape Rusty shoc...
Ford Escape Spark Plug Hole Thread Repair: • Ford Stripped Spark Pl...
Ford Escape Front Seat Removal: • Ford Escape Front seat...
Reach out to us!
Clay's AC and Auto Repair: / claysacandauto
The Clay way Patreon: / theclayway
The Clay Way Twitter: th...
FOR THE BIGGEST AND BEST PARTS CATALOG, CHECK OUT DORMAN PRODUCTS AT: www.dormanprod...
Join this channel to get access to perks:
/ @sharpcarco
#Doorpanelreupholstery #Howtofixcardoorfabric
The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.
This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products
List of cars names
Chevy trailblazer ,GMC envoy , Cadillac Sts ,Cadillac SRX ,Cadillac Escalade, Chevy avalanche ,Chevy Silverado ,GMC sierra ,Toyota RAV4 ,Honda CRV, Acura MDX, Volvo XC 90 Volvo S 70, Audi A4 , Audi asix Audi S4,Volkswagen Passat, Volkswagen tiguan Chevy Equinox ,GMC terrain , Chevy Silverado, GMC sierra, GMC Acadia ,Chevy traverse,Pontiac Grand Prix ,Pontiac G6, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018Jeep grand Cherokee ,jeep commander ,jeep liberty,Jeep patriot, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018 Chevy impala ,Chevy Malibu, Ford F150, Ford escape ,ford fusion ,ford Taurus, Dodge Nitro ,Chrysler 300 ,Dodge ram. Pontiac Sunfire, Pontiac Sunbird ,Pontiac Trans Am ,Pontiac transport Chevy uplander. Mazda CX7 ,2001,2002 ,2003 2004 ,2005 ,2006 ,2007, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018 Mazda CX9 ,toyota tundra
Toyota 4 runner ,2001 2002 2003 2004 2005 2006 2007 Ford explorer 2001 2002 2003 2004 2005 2006 2007 ford F150 ford F350,ford F250, 2001 2002 2003 2004 2005 2006 2007Jeep wrangler , ford Windstar,jasper engine, engine rebuild, best repair shop in grand rapids michigan, best mechanic in grand rapids michigan, (im not), ratchet strap tie down.
0372,C 0306, U 1000, B 0103,B 0100, U1041,P0463,P0452,P0420,P0418,P0411,P0230,P0420, P0421 P0100 P0101 P0102 P0103 P0104 P0105 P0106 P0107 P0108 P0109 P010A P010B P010C P010D P010E ,P0132 p0323,p0324,p0150,p0151,p0152,p0153,p0154,p0155,p0156,p0157,p0158,p0159,p0160,p0161,p0162,p0163,p0164,p0165,p0166,p0167,p0168,p0169,p0170,p0171,p0172,p0174,p0173,p0175,p0176,p0177,p0178,p0179,p0180,p0181,p0182,p0183,p0184,p0185,p0186,p0187,p0188,p0189,p0190,p0191,p0192,p0193,p0194,p0195,p0196,p0197,p0198,p0199,p0200,p0201
C0300,C 0379,C 0372,C 0306, U 1000, B 0103,B 0100, U1041,P0463,P0452,P0420,P0418,P0411,P0230,1
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Here's some tools to get started! Thank You!
DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ
5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI
Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT
CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL
ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy
CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe
Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
DEWALT Combination Ratcheting Wrench Set: amzn.to/3QkoHp4
AVID POWER Cordless Electric Ratchet Wrench, 3/8": amzn.to/3Qfsiox
my left rear seat is stuck and the lever is broke
I have a guy coming to detail the car in a couple of days, he is only removing the front seats. This was the first video I found, and now the only one I need. Thank you!
This is the most helpful Escape video I have ever seen!!
I’m glad to hear you liked it thank you very much
Your Escape knowledge has helped me with my 2003 Tribute, Thank You! BTW, I think I knew that same girl in HS, back in 82 😂
🤔🤔🤔😂😂😂😂
Love your videos brother, Just got a good deal on a 100k Mile Clean Ford Escape v6 Limited. And your videos and helping me with the one little project I had. Nothing but love from Kansas City.
Dude that’s so awesome that you took the time to write that message I greatly appreciate it welcome to the channel
I have to say, i enjoy your videos. I have a 06 escape, and it's been a tank now for 7 years. I've been upgrading things and the maintenance chase. I wanted your thoughts on lowering it. 11/2
First, pigs fly so they can see what's up. Ok, if this works, you are my all time hero! The back folds down only to the seat, so it's impossible to make the cargo (or sleeping) area flat. I'll let ya know, and, man, you are funny.😂❤
Buen video amigo gracias pero también me interesa un video de los acientos delanteros si lo puede hacer gracias
I was hopeful this video would help us get the bottom part of our rear seat out for cleaning. We just got a 2019 Ford escape S. I’m not seeing any tabs to flip up the seat or any kind of release mechanism for the seat bottoms. It looks nothing like what is in your video.
Completely different generation of escape
@@nicko9690 I gathered, but it would be easy for the video to point out which years this actually covers. Even in the text title.
I agree I am trying to do my 2017 can't figure it out
Thanks man. Your video was very helpful.
Hey Clay what tools on a budget should I get to remove the bolts of my rear seats of my 2012 escape ? I can’t afford an impact drill currently as I’m poor. Thanks man
This is very educational. I appreciate it.
You’re very welcome Lucy very pleased that you left me a message. Thank you so much welcome to the channel. Very happy to have folks like you hear.
ThankYou Clay
Thank you for the help.
Thanks man! video helped me remove my seats with ease...
Thanks Ryan I’m glad it did welcome to the channel
@@sharpcarco Yeah it totally helped me, I've got a 2009 escape that I'm doing lot's of stuff to, it's a great service when people share stuff like this, thanks again!
so hilarious & very helpful 👏🏾🙏🏿
What about for a 2021 Escape?
Initially I was trying to figure out why you were removing the rear seats. That’s reasonable isn’t it, because you don’t mention the project until the end. I have a 2010 Ford Escape (rusted rear quarters) and regularly vacuum under those seats, but it never occurred to me that rear shocks might rust out. Thanks I’ll have to find your other Escape videos. Best Regards
I’ve done a couple of hundred of them Shock Tower‘s this one was the most challenging I’ve ever done and I thought I had seen it all….. luckily though the vehicles back on the road and the lady is very happy.
Welcome to the channel very happy to have you.
here’s a link to the playlist about the different ways to do them.
th-cam.com/play/PLWSrc_bUH2bWxAuO_lm1LFE6nxhz_L1I2.html
HAPPY NEW YEAR BUDDY!!!
Just need to get the middle rear seat belt buckle replaced. Does the whole back seat need to come out?
Like your presentation
Well thank you very much I greatly appreciate you taking the time to write that
hi，what is the model year of the escape？
Hello ! I've been searching for about a year I have a ford Kuga/escape with a moonroof and shield They both stopped operating after a jump start. Ford in the UK said they'd need to replace the whole screen at a massive cost but I don't believe that's true. Any help or advice would be appreciated. I have tried all the resets I can find online. Nothing worked. There are lights going to the moonroof control panel so I believe there's power. But not sure if it's a motor issue.
love it thank you
You’re very welcome Bob welcome to the channel very happy to have you
Thankyou!
You’re very welcome I’m glad it was helpful
On my 2009 Escape, the tab you lift to fold my larger half rear seat forward has broken and I can't release it. Do you have any suggestions for that? Also any suggestions for replacing the power sunroof motor that happened to die with the sunroof almost but not quite closed?
THANK YOU! This video was very easy to follow. My grandparents lived in North Muskegon. My dad and uncle were born in Hackley Hospital.
I would think you would take a small screwdriver, And fold it over or you could remove the 2 , 15 mm bolts holding it down
I am trying to find out how to get one of the back seats to release just to even fold down I can't get it to fold down The button goes down but it doesn't let go on the narrow side I guess that's the passenger side what do I do I opened up the trunk and looked up in there and I can't see where the bottom of it is is behind bolts I guess and I can't get in there to get it loose So tell me what to do please.
What is the clicking noise when I turn the staring wheel I have a friend here does the same thing
So nun of the bolts going in to the seats drop or are they in place
The the nuts holding down the seat, no they are welded to the body.
Thank you !!!
What year is this? Need to replace the middle seat belt buckle on my 2014.
This one that I was working on I believe was a 2010 so yours is going to be a little bit different but the function of and the removal of the seats is going to be darn near identical because the body structure underneath your escape is the same so the bolts will be the same or should be the same anyways hope it turns out for you
Hiya, my son's passenger side, rear seat fold-down lever, located on the side of the seat, is not catching to allow it to fold down. I called a local repair shop and they said it could be a cable that has come off or broken. Is that something that can be easily assessed and changed, or should I bring it to the shop?
Generally if that’s the situation you can pull the plastic side down where the lever is at and you should see it either broken or unattached most seats have a cable like that but this particular seat because the bottom folds up it’s separate from the rear so the latches are located on the sides of the seat. And I think it only latches on one side but I could be mistaken I’m telling you though if you take it apart I’m sure it’s a simple system you should be able to look at it and solve the problem fairly quickly or at least know what the problem is very quickly
does anyone know if the seats of my 2003 ford escape limited can fold, it looks like it should but im not sure how
At the very front of the seats, where your legs and knees would contact the seats
There are a little tabs sticking out below the butt cushion
Pull that tab out, and then you will be allowed to raise up the front of the seat
Not seat related but I see you love Ford Escapes. I've got Ecape issues that I'm stumped as where to go next. The car is a 2016 SE model. So this is what I have going on while stopped at a stoplight/ stop sign the car idles very rough and inches forward. I have replaced the plugs, ignition coils and just most recently the brake booster and the check valve line coming off of the booster. Really thought that the booster was going to fix it sadly it did not. At this point I'm not sure where to go next. Any thoughts on what might be causing these issues?
Well it’s just a guess but it sounds like you have a intake leak of some sort so meaning that the engine is being able to suck in air.
Have you done a leak test?
And we’re very happy to have you here on the channel I hope you enjoy the contact it’s very hit and miss….. lol but we’re constantly trying to improve 🤔😂
@@sharpcarco Hey thanks for the response! I have not done a intake leak check yet. Is there a most likely culprit to look for?
More than likely the PCV elbow is broken…
What you do is you start up the vehicle. Open the hood take a can of brake cleaner or carb cleaner. Spray around the intake and hoses they are vacuum hoses etc. etc. and when the engine revs up you’ll have found your leak or broken hose.
Be careful though one time I had a spark plug wire that was bad on a guys car…. Needless to say it caught on fire immediately lol ….. right in front of him I stopped spraying I did not panic and just blew it out ….. so you don’t want to spray too much or let it puddle just a little bit at a time to find the leak.
I don’t think you’re gonna have that problem with your vehicle because it doesn’t have wires. But I feel like it’s worth mentioning… Best of luck to you let me know how it goes.
@@sharpcarco Where is the PCV elbow located? Sorry for the dumb question.
Ford edge 218 rear seat removal ?
Any tips on how to get that seat belt bolt out?
Which one?
@@sharpcarco The middle seat belt. The one that requires the T-50
What’s the issue it won’t turn out? You’re gonna have to drill the head off if you already stripped it.
I'm in dude sterling heights mi in house
The irrelevant facts at the bottom are very distracting
Oh, I’m glad you got the point of the video. Thank you.