you dont need to line up pump with distributor just put it at top dead center set your rotor facing number 1 spark plug and bump engine over and it'll drop in. way faster and easier than messing around with a screw driver trying to align slot with bottom of distributor. just a little tip i used to do it that way too eff all that.
Good job man. Someone already asked about the headers but what other mods did you have to do to it? Will a BBC drop in using a sbc motor mount? Will it bolt up direct to a TH 350 trans?
You're half right. On cars gotta cut or remove heater box, maybe a different brake booster too. Depends on your setup if you got short valve covers you might be able to keep same booster. Heater box delete aint nothing find some metal fasten screws and a sheet big enough to cover holes. No it wont bolt up to a small block transmission. Save yourself the headache and go for 700r4. Easy and will always be parts. Motor mounts will fit engine wise but will be at an angle.
you dont need to line up pump with distributor just put it at top dead center set your rotor facing number 1 spark plug and bump engine over and it'll drop in. way faster and easier than messing around with a screw driver trying to align slot with bottom of distributor. just a little tip i used to do it that way too eff all that.
What modifications did you have to do to make the big block fit, or is it a direct fit? Doing the same to my 85 gmc
It's a direct fit
Good job man. Someone already asked about the headers but what other mods did you have to do to it? Will a BBC drop in using a sbc motor mount? Will it bolt up direct to a TH 350 trans?
You're half right. On cars gotta cut or remove heater box, maybe a different brake booster too. Depends on your setup if you got short valve covers you might be able to keep same booster. Heater box delete aint nothing find some metal fasten screws and a sheet big enough to cover holes. No it wont bolt up to a small block transmission. Save yourself the headache and go for 700r4. Easy and will always be parts. Motor mounts will fit engine wise but will be at an angle.
👏🏾👏🏾❗
I know I said Adjustable Pushrods but I meant Rocker arms... didn't catch it in the edit...
What headers did you use? Any mods had to be made?
I used a cheat set of 2wd long tube headers from JEGS and welded a set of v-band clamps to the header. No mods necessary for fitment.
Pitiful soundtrack.... You must be confused.