Vyper Leveling Guide / Check before Leveling
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2021
- This video shows you how to Leveling for Vyper, please check before leveling. If you have any questions, please click on this link to get the after-sales service. 😎
support.anycubic.com/
#vyper #anycubic #3dprinter #3dprinting
Guys before levelling, make sure that a little light is visible inside the extruder housing when pressing against the nozzle. If that is not the case, the auto levelling is broken and the machine will crash into the bed!!!
Yep! Just happened to me!
Hey would be really nice if you mashed all the tips into the same video for reference on the manual you send in the sd card
Yes, sir, that's a good idea, I will feedback this advice, thank you. 😊
@@anycubicsupport917 I was just thinking the same thing! A video covering all the stuff you should check and possibly adjust with a new Vyper would be hugely helpful.
@@DennyAtkin Thanks for your suggestion, we will consider making a summary guide video. And hope you have a ncie day! 😊
ay pls
Hello anycubic>>> I need a new strain gauge, my Vyper wants to bend the bed front right corner. I also need a replacement cable for the left position sensor on the Z screw. I haven't printed anything yet.
Hello. I arrived printer with a problem on the photoelectric sensor on the left side was unscrewed screw. Could you help me? How do I adjust them?
Hi there, I have an anycubic vyper, my machines autoleveler sensor are broken and i ordered, now when i do autolevel they are do but they going top after autolevel. What can i do ?
I have the same problem with sensor. No red light
Autolevel sensor doesn't work..
I saw on youtube many people has this problem
How can I fix it ?
Bonjour, avez-vous un manuel pour l'installation du nouveau Fireware ? Merci
Hi, is it possible to use manual level setting in case of a problem with autolevel? So that it can print before the replacement part arrives.
Nope :/
Yes but it means grabbing the z rods and levelling by eye while the printer engages.
After I heat the nozzle the entire printer shuts off and resets... How do I fix it?
My new vyper dont go printing mode... When auto laveling complete that machine goes hang... Sometimes it hangs on 5% or 10% printed time, Thats why i can't print.... Please help... Im from Bangladesh.
Кто знает как регулировать регулировочные винты установленные на оптических датчиках. Принтер получил, с выпавшим с левой стороны винтом из датчика, пока я его просто закрутил на место, но как его регулировать не ясно?
Точно такая же проблема, подскажите как решали?
hi, I have the same problem with self leveling, I tried to follow these instructions but the red LED does not turn on. how should i do? I got the vyper at home yesterday. I have already contacted support but have not yet received a response on the matter.
Hi, sir, we're sorry for the auto leveling trouble and we'll solve the problem for you soon.
You can feedback your problem directly here, so that the after-sales engineer will solve the problem for you directly according to your order.
support.anycubic.com/VisitorTicket/guest?id=3&token=6e6e6f9affeKpTBnN5emV0ejsfQEYJUwFSUwNRAFMGTkAY
Or you can get the quick and timely reply on our Facebook homepage.
Facebook：facebook.com/ANYCUBIC3dprinter, Instagram：instagram.com/anycubicofficial/
Hello. Printer just arrived and the red sensor light doesn’t work pushing the nozzle. I can’t auto-level because the z axis does not stop pressing on the plate bending it strongly… maybe some internal contact doesn't work? I can't use the printer obviously. any suggestions? thank you
Hi, sir, we can't give an accurate solution only through words. Can you contact us at our Facebook home page or Ins now? The technician will reply to you soon.
And we may need you to provide photos or videos, you can't send them here. We're very sorry for the trouble and we'll solve the problem for you soon.
Here is the link: Facebook：facebook.com/ANYCUBIC3dprinter, Instagram：instagram.com/anycubicofficial/
Or you can feedback it here with more details, support.anycubic.com/
@@anycubicsupport917 ok, thank you. Kind regards.
@@anycubicsupport917 I have the same problem, no red light. will contact facebook/group
@@icewolffinc have the same issue.. Have you already solved the problem? :'((( please help... The First print was just fine but then a few day's Later it didnt work anymore
Have you solved the problem?? Got the same here 😩
And my leveling sensor failed too. Only got 3 small prints out of it. Now it’s completely unusable.
What’s the next step?
Hi, sir, we're sorry for the auto leveling trouble and we'll solve the problem for you soon.
Please feedback your problem directly here, so that the after-sales engineer will solve the problem for you directly according to your order.
support.anycubic.com/VisitorTicket/guest?id=3&token=6e6e6f9affeKpTBnN5emV0ejsfQEYJUwFSUwNRAFMGTkAY
Or you can get the quick and timely reply on our Facebook homepage.
Facebook：facebook.com/ANYCUBIC3dprinter, Instagram：instagram.com/anycubicofficial/
I have a anycubic mega pro and for some reason it just stops printing can anyone tell me how to fix it
Hi, sir, you can set up an after-sales order here, and the engineer will provide you with a solution directly. if you have submitted it but have not received a reply, you can tell me the relevant information. I will contact the after-sales staff and contact you as soon as possible.
support.anycubic.com/VisitorTicket/guest?id=3&token=6e6e6f9affeKpTBnN5emV0ejsfQEYJUwFSUwNRAFMGTkAY
tightening the belt should be a step in the instructions manual! Setup is otherwise good.
NIce video but please redo it so the white letters on white background dont blend. Overall a better color for text. And slower, you change it soo fast us older folk cant read it fast enough. Or maybe outline your steps in the comments?? Its very hard to read them with. But helpful video im sure. Would love to be able to read and copy.paste the steps into a guide.
If only TH-cam had a pause button!
I have this printer and works great but its sad when videos dont help because of something simple
Attention Arnaque !!! le Service après vente n'applique pas les lois Européennes !!!
The comments are very telling, I guess Anycubic support still is very very bad! I'll pass on this printer :(
don't buy this f4king printer , 2 months with assistance message , and never resolve this problem , change all part inside the printer and have the same problem at beginning
Your going way to fast. As a first time customer it should be at least 1/3 the speed. AND as I am trying to watch and read at the same time this video is almost useless. Maybe some one reading it with a few language options would be a good idea.
Hello I’m having an issue, my E0 Temp won’t get higher than 150c and I’ll get some « bips », after that my machine will be frozen… Do you have any idea :/