Because Etsy dosent ship to Europe, so made my own, painted the stock ones black, with a special paint for cars that has a clear coat and its matte, looks like yours!
For some reason, after turning on my screen again, I have little white hazes on my LCD screen towards the top, did I not install the mother board back correctly ?
So update : after noticing my LCD was showing a white haze @ the top, I retraced my steps, took the mother board out again, blew on it lightly both the shell & mother board incase of debris or dust, installed everything again. Booted it up, & it still showed the haze, but only for a minute or two. Started messing around w/ it opening games / transitioning , & finally it looked clear with no haze on the backlit screen. Idk why but maybe taking out the mother board again & installing it so it fits under the clamps correctly helped. I’m thinking the screen was pressing too hard on the shell, causing the screen to look hazy in that area. Hope this helps for anyone that ran into the same problem.
This video was really helpful, was able to fix the D-Pad! Many thanks!
Thanks! You have two screws missing - once the back is off, holding the PCB (under the battery)
Very clear and easy to understand now, PLEASE make one for the 353v
Because Etsy dosent ship to Europe, so made my own, painted the stock ones black, with a special paint for cars that has a clear coat and its matte, looks like yours!
does ship to europe, just not every shop sadly. Take a look at Sakura retromodding if you are in europe.
The best tutorial!! Congrats!
Thank you, perfect tutorial!
Do you have a link to the exact screwdriver that you used for this? Mine is too small and the bit head won't catch into the screws.
you are my hero
where are the two screws that hold the motherboard in place on the inside? mine came with them. just wondering if it needs them or not.
So you prefer all black over colors
Great tutorial!
Now they got a whole set of buttons including the power and volume buttons to
For some reason, after turning on my screen again, I have little white hazes on my LCD screen towards the top, did I not install the mother board back correctly ?
I have the same issue. They flash during boot and then disappear
So update : after noticing my LCD was showing a white haze @ the top, I retraced my steps, took the mother board out again, blew on it lightly both the shell & mother board incase of debris or dust, installed everything again. Booted it up, & it still showed the haze, but only for a minute or two. Started messing around w/ it opening games / transitioning , & finally it looked clear with no haze on the backlit screen. Idk why but maybe taking out the mother board again & installing it so it fits under the clamps correctly helped. I’m thinking the screen was pressing too hard on the shell, causing the screen to look hazy in that area. Hope this helps for anyone that ran into the same problem.
THIS ^^ or it might’ve been the ribbon cable wasn’t clamped / all the way in.
Kinda dont trust the process because he didn't turn it on before or after. So many people who follow this have screen issues after the fact
Worked fine for me
Where have you seen that? It worked fine for me and my friends, just be careful with the ribbon cable
@@danielanderson9400 yea, I imagine any issues are just because they aren’t pushing the ribbon cable in far enough or something
@@danielanderson9400 if you read most of the comments or anyone like 70% have screen issues after