#mill

#Knowledgedevelopmentchannel
This channel providing information regarding daily routine follow by an electrical engineer.An electrical engineers, how to works in plant by automation and how to update day to day in his life,all these knowledge in this channel.
#hitkumar
Every day in this channel, we share the upcoming things of the people daily.
Watch this video and learn and follow. I hope you will definitely get benefit.t
6 Hi single stand, high tension, reversible mill is installed for cold rolling of the pickled coils to the desired thickness as low as 0.13mm. Mill has all the capability and capacity to produce cold rolled sheet of practically table top flatness.
What is a 6-high mill stand?
The DANIELI FRÖHLING‘s 6-High Mill Stand Technology is a high flexibility Cold Mill stand that not only allows for improved performance and product quality, but also enables to fulfill the most demanding applications such as thinner gauge, improved flatness profile, and rolling of higher strength materials
# • SCR Part 2 | SCR WORKI...
• PLC PART 1💡 || PLC INT...
# • Scr part 3 || Question...
# • working of thyristor||...
• Insulation class | Ins...
# • Agc Control Rolling Mi...
# • SCR Part 2 | SCR WORKI...
# • SCR PART 1|| 🤵HOW TO T...
# • Star Delta control wir...
• Torque and Tension, T...
What is a 6 high roll mill?
The diameter of the 6-high work rolls amounts to approximately 1:4 in relation to the barrel length. In comparison to a 4-high mill stand, the utilization range is wider. This type of rolling mill is mainly used in offline applications for cold rolling of soft and medium strip and for a wide range of strip widths.
What is 6 hi cold rolling mill?
Six roller (6-hi) cold rolling mill introduction 6-Hi rolling mill is especially suitable for high precision rolling at high rolling speed, can give a variety of finished thicknesses, reducing steel coil strip from 3mm to 0.10mm with width ranging from 500 to 1250mm.Different materials and...
What are the advantages of a 6 high rolling mill?
Also, the larger rolls allow for heat transfer so the temperature is held with or without thermal change at these high speeds. Roll bend can also be provided in a 6-high mill. These mills can be pinion stand or dual motor driven. Six-high rolling mills are equipped with hydraulic screwdowns, automatic shape control, and automatic gauge control.
What are the specifications of a rolling mill?
Technical Data Rolling mill specification: 1250 450 370 1450mm Working roll size: 370～3301450 mm Intermediate roll size: 450～4001450 mm Max rolling pressure: 18000 KN Max rolling speed: 1200m/min Outline dimension of the Unit (length x width x height): ≈25x31x11 m Finished product precision:
What is ucmw 6 high rolling mill?
The UCMW six-high rolling mill adopts both work rolls and intermediate rolls that can move, and adopts the form of work rolls and intermediate roll bending rolls, as shown in Figure 3. This model can carry out ultra-bo college rolling. Compared with an ordinary four-high rolling mill, HC rolling mill has the following characteristics;

[@468deva]

Thanku sir. Nice information sir 🎉🎉🎉🎉

[@shrawankumar9886]

Thank u sir
Very important information & knowledge

[@aakarshkumarjha8837]

Thanks sir for your information

[@priyalohar4080]

Very nice sir jee

[@knowledgedevelopmentchanne8720]

Thanks dear

[@Ajaybiharwala]

Thank you sir

[@yogendrasahu-fr9lv]

Make video above 20 hi milll.. with auxiliary part full details,

[@knowledgedevelopmentchanne8720]

Thanks for message,
Sure I will post video related to this .