AGC control rolling mill |Mill Automation |Mill rolling concept,6 Hi and 4Hi rolling mill details||
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Continuous rolling mill. Sheet metal passes through several rolling stands, each pressing the metal thinner. Cluster rolling mill. A cluster of metal rolls are lined up.
#Knowledgedevelopmentchannel
This channel providing information regarding daily routine follow by an electrical engineer.
An electrical engineers, how to works in plant by
automation and how to update day to day in his life,all these knowledge in this channel.
#hitkumar
Every day in this channel, we share the upcoming things of the people daily.
Watch this video and learn and follow. I hope you will definitely get benefit.
The diameter of the 6-high work rolls amounts to approximately in relation to the barrel length. In comparison to a 4-high mill stand, the utilization range is wider. This type of rolling mill is mainly used in offline applications for cold rolling of soft and medium strip and for a wide range of strip widths.
What is a 4 high rolling mill?
A four roll configuration is known as a 4 High Rolling Mill, whereby the work rolls are generally smaller in diameter supported by larger backup rollers. These mill can be used for tighter tolerance output material, and for reducing material to extremely small thicknesses.
Production capacity of the mill = Actual rolling time x Rolling t/hr. If calculation is made with the operating hours in Case I and rolling t/hr in Case C, Production capacity of the mill is as follow.
500 hr/m x 30.8 t/hr = 15,400 T/m As for other cases, production in excess of this value is possible.
The roll pressure, estimated by dividing the roll force/unit width by the projected contact length, varied from a low of 950MPa to a high of 2000MPa, corresponding to reductions of 40-68%.
What is flat rolling process?
Flat rolling is the most basic form of rolling with the starting and ending material having a rectangular cross-section. The material is fed in between two rollers, called working rolls, that rotate in opposite directions.
What is the principle of rolling mill?
In the rolling process, permanent deformation is achieved by subjecting the material to high compressive stress by allowing the material to pass through the gap between two rotating cylindrical rolls. The rolls may be flat or grooved, and are kept at a fixed distance apart from each other.
What is the principle of rolling manufacturing?
The working principle of rolling and its processes .
The metal is compressed by the rollers while simultaneously shifting it forward due to the friction at the roller interfaces. As soon as the workpiece passes through rollers, the operation is fully done.
What are the two types of rolling mills?
Main Types of Rolling Mills
Continuous rolling mill. Sheet metal passes through several rolling stands, each pressing the metal thinner.
Cluster rolling mill. A cluster of metal rolls are lined up to be thinned out.
Planetary rolling mill.
Two-, three-, and four-high rolling mills.
What is flat rolled product?
Flat-rolled steel refers to a type of processed metal that is generated via melting and stretching under an applied force. This force is used to create metal pieces in the form of sheets, strip or tin plates.
What are the types of rolling type?
Types Of Rolling Process In Manufacturing Industry | Plant .
Types Of Rolling
Thread/Gear Rolling.
Shape Rolling.
Ring Rolling.
Tube Piercing.
Transverse Rolling/Roll Forging.
Skew Rolling.
Roll Bending.
Flat Rolling.
#scrpart1
#6himill
#plcpart1
# • SCR Part 2 | SCR WORKI...
# • PLC PART 1💡 || PLC INT...
# • Scr part 3 || Question...
# • working of thyristor||...
# • Insulation class | Ins...
# • Agc Control Rolling Mi...
What is the principle of rolling mill?
In the rolling process, permanent deformation is achieved by subjecting the material to high compressive stress by allowing the material to pass through the gap between two rotating cylindrical rolls. The rolls may be flat or grooved, and are kept at a fixed distance apart from each other.
What is the formula for roll speed?
Consequently, its rotational speed ω and the translational speed of its center of rotation vr (where the r subscript is to indicate rolling) are related by vr=ωR, with R the relevant radius of our object.
What is angle of bite in rolling?
In rolling metals where all forces are transmitted through the rolls, the maximum angle that can be attained between the roll radius at the first contact and the line of roll centers. Operating angles less than the angle of bite are called contact or rolling angles.
Angle, Roll Over.