I keep breaking my 34&36 tooth spurs every other month in my Talion . Have you had that problem? There is a slight play with the spur back and forth, and I make sure the mesh is good. I'm stumped bro. Spurs every other month is getting to be a headache.
@@jaymitchrc Bought one of these for my speed runner Typhon build but wondered if I needed anything else to install it. Your video made it clear. I may superglue the pin in though as I am not sure about relying on just a rubber "o-ring" to hold it in. How's yours holding up?
Aww man looks easy! Thanks for the video bro its so helpful!! Looking foward to putting her together i am excited about this build i will take my time doe!!💯
Troy Speed Rc before you don et me know. That rubberband does not hold the pin in. U will need to do a lil something extra to make sure it doesnt pop out
How did you car run after you put it in? I installed mine and now when I give it a lot of throttle it’s like it’s slipping I have to easy into the throttle for it not to slip
chad goodman well one thing i did was instead of just relying on that rubber band i used some good thread then super glued it then ruber band and then shrink wrapped it. I dont have any issues with the amount of power i can apply. I have this spool on all my arrma speed and drag builds
truboy555 a spool is a shaft that replaces a diff, in this case this is a center spool locker. Spool allows you to use smaller gears in hopes to acheive a 1:1 ratio which will make your rc reach 100+ mph depending on your cars set-up only for use for onraod applications. Using off road will most certainty trash your front and rear diffs. Wouldnt reccomend thus for your oucast because its off road unless youre gonna dedicate it to onroad. If you just want the outcast to be faster there are other ways to do it. Cheapest would be run a larger pinion 16 - 20 tooth. Another more expensive option would be upgrade motor and esc, gears, change diff fluid and look at some new tires.
Hey j did you have to modify anything to put this spool in the talion? And you told me there was something to do to the spool that you left out in the video Just trying to make sure i am doing everything right
2.25X9.8MM also the provided rubber band to retain it is not sufficient. you should look into a retainter clip of some sort there is a Team associated clip i want to give a try as the pin will come out at some point.
Mobay876 thanks for watching. I'll definitely sub to you mang. Also when u do this make u use some shrink wrap over the rubber band to make sutlre you don't lose you drive pin as runner band is not enough.
Cool how that works, looks easier than how some people make spools
Chris Chupp thanks for watching man
thank you! I had ordered these parts drunk months ago and didn't know what the hell to do- haha - great video!
I appreciate the video man. I just got my arrma talion today and my HR speed run center locker spool. You just helped me out big time bro.
Rustler Dreams 83 yo thanks for watching and subbing definitly appreciate it big dawg. Happy i.could help u out mang.
This is absolute brilliant
Way cool subbed. So I have a Revo 2.0 and I can use this spool with my Revo gear sets on my felony? Thanks bro
Yes exactly will work perfect in that application. Also thank you for the sub.
I keep breaking my 34&36 tooth spurs every other month in my Talion . Have you had that problem? There is a slight play with the spur back and forth, and I make sure the mesh is good. I'm stumped bro. Spurs every other month is getting to be a headache.
Great video. Appreciate it.
Thanks for watching. Glad this vid was useful. Keep saying I'm gonna do an update vid
@@jaymitchrc Bought one of these for my speed runner Typhon build but wondered if I needed anything else to install it. Your video made it clear. I may superglue the pin in though as I am not sure about relying on just a rubber "o-ring" to hold it in. How's yours holding up?
Aww man looks easy! Thanks for the video bro its so helpful!! Looking foward to putting her together i am excited about this build i will take my time doe!!💯
Troy Speed Rc before you don et me know. That rubberband does not hold the pin in. U will need to do a lil something extra to make sure it doesnt pop out
I realize I am quite off topic but does anyone know a good site to stream newly released movies online ?
Nice video 👍 looks strong
Does this make the vehicle only good for speed runs?
It makes it good for speed and drag racing. If you want to go back to bashing simply reinstall your stock center diff.
How did you car run after you put it in? I installed mine and now when I give it a lot of throttle it’s like it’s slipping I have to easy into the throttle for it not to slip
chad goodman well one thing i did was instead of just relying on that rubber band i used some good thread then super glued it then ruber band and then shrink wrapped it. I dont have any issues with the amount of power i can apply. I have this spool on all my arrma speed and drag builds
@@jaymitchrc Dude what do you mean good thread? You mean you put sewing thread bunched up in the hole and super glue?
@@KaizerTest no. Put the pin in and then wrap thread around the groove and then a little ca glue to keep it together.
Jay Mitch Ok thanks bro.
Hello
thanks for this video, question,.which gear do you use for this? Is that possible with the original?
thanks happy racing👍👍👍👍👍👍
Traxxas Revo style mod 1 spur gear. Will not work with stock diff gear
What size dog bone are u running
Stock.
Thanks man working on it now
Awesome video my man thanks so much.
Mann I just got into rc bout 6 months and got a Arrma outcast..what is a spool..and can I put one on my outcast
truboy555 a spool is a shaft that replaces a diff, in this case this is a center spool locker. Spool allows you to use smaller gears in hopes to acheive a 1:1 ratio which will make your rc reach 100+ mph depending on your cars set-up only for use for onraod applications. Using off road will most certainty trash your front and rear diffs. Wouldnt reccomend thus for your oucast because its off road unless youre gonna dedicate it to onroad. If you just want the outcast to be faster there are other ways to do it. Cheapest would be run a larger pinion 16 - 20 tooth. Another more expensive option would be upgrade motor and esc, gears, change diff fluid and look at some new tires.
Can I use the stock spur with this spool? If not what spur can I use? TIA
You have to use a revo style mod1 spur
Jay Mitch thanks a lot.. do you have the part number by chance? What size of pinion did you use with it? How fast can it go?
@@209rc7 sorry man I dont give out my gearing. In this vid I beleive uninstalled a 36 or 38t spur.
Hey j did you have to modify anything to put this spool in the talion? And you told me there was something to do to the spool that you left out in the video Just trying to make sure i am doing everything right
Troy Speed Rc shoot me an email with your number I'll give you a call jonblizz@yahoo.com
Great explanation 👍
Henry fords rc thanks man. Not the video I wanted to do but I had a cpl ppl ask me for details
Would you be good enough to reply with all part numbers for this build please
Thanks for watching here a link
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fp%2F17012727934
Jay Mitch RC thank you
It looks like you have a Limitless. That has a spool already.
What exactly are the benefits of running a spool? I’m new to this an would like to crack 100mph with my Talion V3
Mario Mazyck gives u ability to gear car for 100mph. Locks center drive for equal power delivery front to rear
Hi jay with one size pins you used
AR310440
i have pins the size is 1.7 x 11 mm is not work
2.25X9.8MM also the provided rubber band to retain it is not sufficient. you should look into a retainter clip of some sort there is a Team associated clip i want to give a try as the pin will come out at some point.
Jay Mitch thank you appreciate have god day
Thanks 👍👍👍👍👍
Yes sir big up bro when mine come I will give u a shot out this is the fast way bro🤫💯👌🤟👏🤝
Thanks. Everyone else videos be crap
Sub #82 thanks a lot for this video just got my typhon the other day now I know how to do the spool 👍🏾💯 check my channel out
Mobay876 thanks for watching. I'll definitely sub to you mang. Also when u do this make u use some shrink wrap over the rubber band to make sutlre you don't lose you drive pin as runner band is not enough.