What is a Guide Coat? Find & Fix Low Spots in Body Work
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Clearly explains what a guide coat is and how it can help you find and fix low spots in body work. Tools, materials and Lakeside Merch listed below -
💥 10" Sanding Board - TCP Global Wooden Handle Longboard Sander for PSA Sandpaper 10-3/4" x 2-3/4" or other.
💥 Sand Paper - 120 grit (use 80 if needed to cut it down faster then go to 120, 150 or 180)
💥 Primer Surfacer Used - Autobody Master lacquer primer surfacer (all lacquer primer surfacers are very similar)
💥 Red Glazing Putty - Bondo Glazing and Spot Putty, 00907ES
💥 Body Filler - Evercoat Lite Weight Body Filler
💥 Spray Gun - 3M Performance Spray Gun w/ 1.8mm tip
💥 Lakeside Merch - brothersdesign...
💥 Lakeside Discord (Your Projects) - / discord
💥 Lakeside Autobody - / @lakesideautobody
***************************************************************************************************
Jerry the sheet metal and auto body magician showing the tricks of the trade. Thank you Jerry for a superb demonstration of the purpose of a guide coat.
You're welcome William - thanks for watching and the kind words - have a good week :)
High build primer is the best thing ever. Have a great weekend
You're right - then there's feather fill - even thicker!!
Another great video Jerry! Enjoy your weekend 💯
You too UPK - Go Lions!! 🏈
HI Jerry, awesome video! Have a great weekend!
You too GM - thanks for watching :)
Absolutely a very important step in autobody work Jerry I use Guide coat and what a difference I have learn so many things watching 👀 you for about 5 year's now and always learning something different all the time thank you for what you do brother
You're welcome Luis. I appreciate all your kind comments through the years my friend. Talk to you soon :)
Great video Jerry. Your explanation of the process was easy to follow.
Thanks 👍 - Thanks for the support too Bluesman - always good to hear from you.
I've done it before but need lots of practice. I'm not a pro yet
Man. Big fan of your videos and work
Thanks a lot Neuberas - enjoy the weekend :)
Nice little video looks great keep up the good work and have a great weekend
Thanks, you too Brad 😊
Great one jerry
👍 Enjoy the weekend Super G 🏈🎄😊
Great demo as always Jerry !!! I need to learn patience. That's my problem
Thanks 👍 Take a coffee break more often - you'll come back with more patience - really :)
@@LakesideAutobody Good advice !!!
Great video thanks for showing what grits u used
No problem 👍 Thanks for watching Gary :)
Good job keep up the good work ,love your channel
Thanks Patrick - have a good weekend :)
Awesome... Man I got a lot of sanding coming in the future! Lol😂
😁👍
great stuff man!!
Thanks Marty - have a good week :)
Very helpful
Glad it helped - have a great weekend :)
👍👍
hnnbnmm
Love your videos! I have a new tailgate that was shipped with a glossy black finish. Do I need to sand it or prime it before painting it?
Just scuff with the red scuff pad and paint - Mirka 18-118-447 You can sand it too if you want DA (320) or hand sand w/ 320-400 wet - paper wont clog as easy wet sanding.th-cam.com/video/BD4txPwjsfI/w-d-xo.html
Thank you so much!
I noticed your touch up body putty was feathered over primer. Any problems there with retention later? Also do you have a video about fixing common painting problems like dust, bugs and runs?
What are your thoughts on using the 3M 08115 vs the panel adhesive you use. Yours is approximately twice the cost.
I used JB Weld in this video and it's perfect to this day - th-cam.com/video/wRl1QfkrBeY/w-d-xo.html Only reason I like the SEM is it's impact resistant - don't have to be careful at all when knocking down the seam. I think you'll be fine though - esp. since the JB worked :)
@@LakesideAutobody sorry, I meant one of your past videos. I'm installing full quarters on my 70 Nova.
New to all this, I feel like I need to load up the panel with black to see anything, my inexperience shows here and I find it very difficult to understand the process of getting the panel flat. I tend to sand and then all of a sudden I'm at metal Do you have any tips for doing this on curved fenders (I'm working on an rx7 FD) Thanks again
First, make sure you are using automotive grade primer surfacer - it builds thickness, You need a few heavy coats to be able to block sand out high and low spots. You don't need a lot of black paint - matter of fact you don't need a guide coat at all. Here's another vid that may help - th-cam.com/video/S8OzM13iwHA/w-d-xo.html Keep asking ?s, keep working and you'll be fine :)
Thanks a bunch! I'll give this a watch.
120 grit seems very agressive for sanding primer
In a body shop you'll see guys start with 80 sometimes - move to 120 - etc. You have to be fast to make money as you get paid by the job - commission. But... you find out that it makes body work a lot easier in the end. Like building a house - start with the heavy equipment like bulldozers, etc. and end up with super nice finish work.
@@LakesideAutobody I've been a production paint tech for 30 years. My biggest commission week was 250 paint hours on my own without a preper. I am finally starting to get paid prime and block from most insurance companies. Years ago I would block my primer with 180 now days I use 320 but it feels more like 220. I'm very picky with my body guys if it doesn't pass my hand inspection it goes right back to them.
Quack Quack
🦢 - closest thing I could find to a duck :)
@@LakesideAutobody I have bodywork to do, but instead Im wasting my time looking at emojis. That should tell you how much I enjoy bodywork. Thankfully you have taught me enough that I can do a nice job! ThxQ. I found it!🦆🦆🦆🦆🦆
Can you prime over 220 grit ?
Yes
@@LakesideAutobody
Thanks for the reply 👍
Another great video Jerry! Enjoy your weekend 💯
Thanks 👍