Low beam/ high beam mod for a 02 chevy

This is a video on how I made the low beams come on with the high beams on my 2002 Chevy Suburban is also works with Silverados Tahoes Yukons and many more Chevy trucks

[@VayaconChupacabra]

well, that certainly is short and *simple.........now, if you'll excuse me.....I am off to tinker with my truck.
thanks for the vid! It is very helpful.

[@armandogalvan295]

Did it work for you?

[@bakerviewlandscaping327]

One of the easier mods to these trucks and you made it simple and easy to understand, thank you.

[@jokersoutlaw77]

Thank you! Decided to try this on my 2004 Chevy Blazer, highs, lows, and fog lights all on now. Used the driver side headlight ground to my fender bolt.

[@raymondkelly4065]

C
Glad to hear it helped you have more videos on Chevy's if you needed help

[@leroygutierrez3948]

Bro this was the best solution on the tube !!!
If u wanted u could of made it in 2min
Thank you

[@medallionsales]

Did this to my personal suburban and works as described. All the jumper-wire stuff in other hacks worried me but this made sense. Thanks my man.

[@raymondkelly4065]

I'm glad to here it worked for you

[@gonzobrink]

did this to my 02 silveraedo back in 2016 its 2021 and they still work......keep in mind it will burn your lowbeams out quicker

[@danieljimenez1036]

how much quicker though? because i’m running LEDs and they’re kind of expensive

[@abdullahqutub6158]

is it completely safe?
i’m afraid that it might cause heat on the wires or shorts.. im not that good in electrical things do correct me if i’m mistaken + should i put a new fuse or relay for more safety and if yes where should it be exactly?

[@kidslostboxed]

how

[@tristanarthur621]

Did this too my 2002 Silverado and works awesome.👍 thanks

[@AcerArtsOfficial]

Im not able to find a good ground on mine i guess, even after scratching a little paint around the bolt under weather stripping next to the maf sensor and air filter

[@bobbyemick4251]

Nice an simple thanks bud

[@xraykadiddlehopper8067]

I used a painless kit with relay and fuse. Some just ground and go but I feel safer with a relay and fuse in this system.

[@JasonFarrell777]

Thank You from California

[@jeramystephens74]

Worked on my 2002 Silverado. Thanks

[@raymondkelly4065]

I'm glad it helped

[@markdukakus7024]

finaly a simple setup thanks

[@markdukakus7024]

just did it works great

[@wernerfamflorida4049]

Nice work brother keep it up!

[@garyfroman7517]

Thanks I thought there was something wrong why my high low beam didn't stay on whilst on high beam

[@lparsons6977]

Thanks

[@vitalirider707]

For corvette?

[@HunterDarkWolf]

Now to figure it out for a 2001 dodge durango

[@jairorodriguez3546]

What’s the light that doesn’t turn on for? Those never turn on and idk how to get them to turn on.

[@calebtolsma7668]

Daytime running lights. They turn on during the day when you have your headlights off and you put the truck in drive.

[@4everaYoung]

Pull DRL Fuse And Use Small Jump Wire In Top and Bottom Left Slots ( Make Sure You Have New Bulbs And Sockets Though)

[@tyronejohnson251]

Thank you thank you

[@Valdemar-Perez-III]

Imma do this tomorrow.

[@pancaketusday5506]

Man, i did it and now half my dash doesn't work, i lost my temp gage, most of my Christmas tree went away, wipers stoped working and hvac stoped working

[@raulcorrea440]

I tried it on my 02 Tahoe but in the passenger side and it blew out the fuse

[@professionalmike4189]

This is my comment.

[@armandogalvan295]

I did this and burned a fuse😑

[@JohnDoe-jj8sp]

Great video buddy, it worked on my 2000 suburban.👍.ur the MAN

[@luke2315]

@Cameron Appleton what kind of wire works best?

[@dead-legend-2386]

@Cameron Appleton 😂 😂 wrong wire my friend