"hey guys here's a video on step by step instructions for the hood lights!! Let's get to it!" "Ok, so you can see here I have it all connected! Let's check it out! So as you can see it's easy!" Problem is, I did exactly what you said but my lights are still sitting in my hand
So i had a question? Do these led strips have a driver to control flickering... Or do you need to install one?... Is it just like plug (connect) and play. If you could advise 🙏 Thank you.
I bought one these types of kits but they brought 2 yellow wires as well. Any Idea what they would connect to? SO I have Black, red and 2 yellow wires. Any help would be great
After watching your how too! Video for one thing you didn’t go into detail with showing how you made the connections and next you stated fuse box and not headlight which is misleading , I would suggest you you stick with what you say your going to do. But I will say this hooking it directly to the headlight the bmw headlight error code will pop up on the dash board and am saying this because I did exactly what you did and the only reason I watched this video is because you stated connecting to the fuse box. So on a bmw this is not ideal to run on the headlights due to the modules.
@@sumeetlal1 I do not have the exact car as you so I am not sure for yours, sorry. I would look in the owner's manual for fuse box location. However if that 2022 X3 really has no fuse box in the engine bay, then the only option for you is to access the fuse panel that is inside the cabin. Most likely it's behind the glove compartment so you would have to open that to see your fuse panel. Then decide what fuse you want to tap into. The difficult part is that your lights will be in the engine bay area while your fuses are all the way inside the cabin so you would have to find a grommet to push the wires through so it can reach the glove compartment. Make sure you choose a fuse that won't mess anything up.
Simple, just get terminal ends and crimp them onto the end of the 2 wires. Black will go to a ground and the red you will have to find the right fuse that works best for your car.
![อยู่คนเดียวกับเขา - ส้ม มารี (Zom Marie) [Official MV]](http://i.ytimg.com/vi/gq1cWAIQDLg/mqdefault.jpg)
You didn’t show the bit that most are looking for, how did you connect it to the fuse? Piggy back or fuse tap?
Thankyou.....exactly... Step by step my @$$.
"hey guys here's a video on step by step instructions for the hood lights!! Let's get to it!"
"Ok, so you can see here I have it all connected! Let's check it out! So as you can see it's easy!"
Problem is, I did exactly what you said but my lights are still sitting in my hand
Exactly didn’t show anything 😂😂😂😂
Thank you!!! Its simple, to the point and detailed !!! ...and I'm a lady😄❤❤❤
Great video, appreciate your work. Can you guide me where would be the fusebox for the BMW F40? I have a 2021 model.
Also you can put them on your parking light fuse!!
I went with the ice blue. Stands out a bit more than the white, but not quite as over board as the blue.
Didn’t even show how you install it smh
That’s what I wanted to see..damn it
Why stick it to the hood instead of the body? Then you wouldn't have a chance of pinching the wire when closing the lid.
could you not just run it to the running light? when you flip on accessory it would turn on with it
What’s the length? I’m seeing 70” but I think that’s for trucks. Are cars 59”?
On ur chrysler 200 what fuse did u wire it in too whats the letter and number of the fuse please
So i had a question? Do these led strips have a driver to control flickering... Or do you need to install one?... Is it just like plug (connect) and play. If you could advise 🙏 Thank you.
Nice light effect but think it would look better on a different shape car.
Wow great video very detailed 👌
What about for a 2009 cadillac cts
Whats the point you said the fuse box but then connected it to headlight? Not even show how to connect to the fuses?
I still don’t know where to hook it up at… I got my red wire to the ignition switch fuse where do I hook the black wire up at ??
Black is ground
I bought one these types of kits but they brought 2 yellow wires as well. Any Idea what they would connect to? SO I have Black, red and 2 yellow wires. Any help would be great
I got the same situation but i jus found out the yellow wire is for when you turn left or right
these would be probably for Left,right turns
The yellow connects to the turning signal
Thank ! Good video
So where you put the black one😂😂😂
How that scan option is working out
Possible on Tesla M3?
After watching your how too! Video for one thing you didn’t go into detail with showing how you made the connections and next you stated fuse box and not headlight which is misleading , I would suggest you you stick with what you say your going to do. But I will say this hooking it directly to the headlight the bmw headlight error code will pop up on the dash board and am saying this because I did exactly what you did and the only reason I watched this video is because you stated connecting to the fuse box.
So on a bmw this is not ideal to run on the headlights due to the modules.
Did you hook up yours inside the fuse box? Where is your fuse box located? I have a 2022 bmw x3 think my fuse box is inside the car?
Yes there is always a fuse box underneath the dash in the cabin somewhere. Is there no fuse box in your engine bay?
@@WilldaBear, I don’t believe there’s any fuse box in the engine bay for BMW. Did yours have a fuse box underneath the engine bay??
@@sumeetlal1 I do not have the exact car as you so I am not sure for yours, sorry. I would look in the owner's manual for fuse box location.
However if that 2022 X3 really has no fuse box in the engine bay, then the only option for you is to access the fuse panel that is inside the cabin. Most likely it's behind the glove compartment so you would have to open that to see your fuse panel. Then decide what fuse you want to tap into. The difficult part is that your lights will be in the engine bay area while your fuses are all the way inside the cabin so you would have to find a grommet to push the wires through so it can reach the glove compartment. Make sure you choose a fuse that won't mess anything up.
@@WilldaBear you’re talking to a wall trying to explain to a bmw driver
Brother can I connect car hood led drl light with starter fuse connector positive pole .... Reply me please. Thanks
yes you can, you can also connect to trailer light fuse, or whatever you have availible
Thanks brother
How to connect on a Lexus LC500 ?
Same process for every car. Tapping into a fuse.
How long did it last
1 day
@@CCCC-tq8yo u had a bad one then
Are the blue lights legal to use?
Ya
How would I connect this to the ignition fuse? I don't have drl in a 2002 grand cherokee
Open the fuse box and look for the ignition fuse. Then use a fuse adapter to tap into it. I ended up using another fuse instead of ignition.
Hook it to the fuse 🤦🏾♂️
Please show us the ignition fuse or headlights fuse
Missed the important part of video ..
kind of useless when you don't show hooking up the wires.......
u didnt even show how you connected which was the main purpose for us clicking. some of us need a visual because we do not know... pointless video
Simple, just get terminal ends and crimp them onto the end of the 2 wires. Black will go to a ground and the red you will have to find the right fuse that works best for your car.
@@WilldaBear Not very simple for them apparently
right
Red on baterry and black in my ass😂😂😂
Thats not simple
Yes it is. Takes 10 minutes
Exactly. That's not simple at all.