Very informative! I think it is also worth mentioning that if you use countersink rivets you should also match the degree of angle and rivit diameter of the rivit to the bit you are counter sinking with.
Great video and a great boat, man that is impressive. the lines are perfect and I like the idea of a small over-hang to compensate for the turf. Keep em comin. 👌
Did you do the full layout? This is by far the most creative decking layout you've done so far. Your blowing me away with each video. It just keeps getting better and better!
Yes. Livewell was in back. Gutted entire back, made it open. Moved livewell up front with completely new tub and plumbing. Removed steering consol, added 3 ft to front deck in place of it. Added step to deck for batteries. Upsized hatch in front with recessed trolling motor tray. Added cockpit side panel steps. Only thing original is the factory rod locker location and panel, although it got a new lid. More to be shown and explained in the reveal/build video when complete. And thank you for taking time to compliment.
Looks great what gage aluminum should I use on my 16 ft 1998 sea nymph jon boat 1648. I just want a floor that is lightweight and won't rot. And after I lay it down were can I buy the turf? Keep up the great builds man im loving the information and new subscriber
hey man I commented on one of the TBN TN boat build livestreams. And asked you if you needed someone to edit videos for you. I live in GA and I would be more than happy enough to edit your videos for you. Or at least do the rough edit if you would like.
hello Anthony i have written to you a few times asking you what is your location? i would like to talk to you about prices. i have 2 boats i am interested in giving it a lift.
Jefferson Ga. I currently have a 6-9 month wait list. Deposit required to get on. Sorry I missed your message, not sure where it was sent. Please email brigadeboats@gmail.com for project enquiries.
Easy, instant subscription to the channel. So rad to get this kind of insight from someone so locked onto his craft. Keep it up, cousin! 😂🤙
Thanks for the support cuz👊 Much more to come in the future
@@AnthonyJonesBrigadeBoats I wanna buy one only thing I see you on is Facebook and TH-cam I don’t have a Facebook
Man, your attention to detail is very inspiring! Great work!
Amazing work cuzin. Good idea with the poster paper, much easier than cardboard!
I stole that from someone else off youtube cuz. Fake it til u make it
@@AnthonyJonesBrigadeBoats LOL> Yeah baby! FAke it
Wow! That boat is gonna be so sweet!
Moving on up! Great job. Enjoy watching you and your career.
Thanks man I definitely appreciate the support
awesome job cuz... shears are life savors for sure!!! 👍🏼 cant wait to see that bad boy complete 👀
Shears 4 Life. Thanks cuzin my cuzin
Looks awesome bud!!
I can't wait. You do such nice work.
Me either. Thanks cuzz
Amazing craftsmanship!
Thank you👊
Very informative! I think it is also worth mentioning that if you use countersink rivets you should also match the degree of angle and rivit diameter of the rivit to the bit you are counter sinking with.
For templates I use opaque plastic sheeting.
super clean, like always
thanks man
I really like this man. Keep up the good work 👍🏿
Will do thank u
I'm a big fan of your work. Watch everything that you upload. Hated not to be able to meet y'all up in Tennessee.
Missed you cuz
Great video and a great boat, man that is impressive. the lines are perfect and I like the idea of a small over-hang to compensate for the turf. Keep em comin. 👌
Will do, thank you. She will be a beauty when done. Hope you stay tuned.
@@AnthonyJonesBrigadeBoats You can count on it.
Nice work
Do you rivet the overlays in that are creating a flush surface for the aluminum deck?
that is quality work my guy 👌
Thank you👊
Did you do the full layout? This is by far the most creative decking layout you've done so far. Your blowing me away with each video. It just keeps getting better and better!
Yes. Livewell was in back. Gutted entire back, made it open. Moved livewell up front with completely new tub and plumbing. Removed steering consol, added 3 ft to front deck in place of it. Added step to deck for batteries. Upsized hatch in front with recessed trolling motor tray. Added cockpit side panel steps. Only thing original is the factory rod locker location and panel, although it got a new lid. More to be shown and explained in the reveal/build video when complete. And thank you for taking time to compliment.
@@AnthonyJonesBrigadeBoats So clean!! Can't wait to see the finished product.
Very clean.
thanks cuz
hey man do you think that sheer tool would cut 1/8 (.125) sheets?
Looks great what gage aluminum should I use on my 16 ft 1998 sea nymph jon boat 1648. I just want a floor that is lightweight and won't rot. And after I lay it down were can I buy the turf? Keep up the great builds man im loving the information and new subscriber
Great work
Thank u
hey man I commented on one of the TBN TN boat build livestreams. And asked you if you needed someone to edit videos for you. I live in GA and I would be more than happy enough to edit your videos for you. Or at least do the rough edit if you would like.
i bet watching these videos as the customer is absolutely fantastic. i would be as giddy as a school girl watching it come together.
Absolutely man. Only thing is typically these are released after the customer gets the finished boat back.
What thickness is the aluminum my sheer cutters must suck even though they are brand new 😂
Hey love the build man, what thickness aluminum sheeting did you use?
.090
Love your channel helps me out first time diy guy myself
Question just how thick is the aluminium for the framing
I use 1/16th
@@AnthonyJonesBrigadeBoats thank you very much dont know anything about boat framing but going to give it ago
A Dub is KINGGG!!!
All Hail King A Dub
What hatches did you use? They look great! (Or did you make them?).
tbnation.net/products/dry-storage-hatch-lid-pre-built?ref=builtforbattle
hello Anthony i have written to you a few times asking you what is your location? i would like to talk to you about prices. i have 2 boats i am interested in giving it a lift.
Jefferson Ga. I currently have a 6-9 month wait list. Deposit required to get on. Sorry I missed your message, not sure where it was sent. Please email brigadeboats@gmail.com for project enquiries.
멋지네요
very nice video
Thanks!
ReeeObeee
That's right cuz