@MVB Outdoors Hi, love your channel. Its is making the building process much easier for me. Im still on the fence between wood and aluminum. Do you have a video on how you attached carpet to the aluminum floor? Thanks in advance.
Hey buddy thanks for the information in this video im avout to do a floor myself and just curious why you added the foam and if you found it absolutely necessary? I can only assume it was to maybe quiet any creaking? Thanks in advance
Love your videos but have a quick question. Just about to lay the aluminum floor down. What's the best way to secure the seats and other things to the floor?
There's not a simple answer to that because it depends on a lot of factors like mounting bases, framing, floor thickness etc. For me, I framed in a set bench and mounted seats to the bench, the only thing I mounted to the floor was the side console and I used a mix of stainless screws and aluminum rivets.
My jon boat is a 1448 and the middle seat was removed by the previous owner, it flexes a lot, enough to crack 3 cross members, i was hoping that putting some aluminum angle perpendicular with the cross members to tie them together then puting an aluminum floor down, do you think that would stiffen it up? Have you noticed a difference in stiffness?
It's for safety flotation, basically if the boat gets swamped or capsized it aids in not having the boat sink completely. It's also legally required and helps with sound deadening
.100 48 x 96 3003 Aluminum Sheet
Great videos. Appreciate you sharing your experiences!
Glad you're enjoying them! Lots to come!
@MVB Outdoors Hi, love your channel. Its is making the building process much easier for me. Im still on the fence between wood and aluminum. Do you have a video on how you attached carpet to the aluminum floor? Thanks in advance.
Hey buddy thanks for the information in this video im avout to do a floor myself and just curious why you added the foam and if you found it absolutely necessary? I can only assume it was to maybe quiet any creaking? Thanks in advance
Hey man, it's usually added to help it float if the boat capsizes or sinks. You don't need to add it if you don't want too.
Love your videos but have a quick question. Just about to lay the aluminum floor down. What's the best way to secure the seats and other things to the floor?
There's not a simple answer to that because it depends on a lot of factors like mounting bases, framing, floor thickness etc. For me, I framed in a set bench and mounted seats to the bench, the only thing I mounted to the floor was the side console and I used a mix of stainless screws and aluminum rivets.
@@mvboutdoors thank you so much. The only thing I'm mounting is 2 bolts from console and both seats (6 bolts each)
I have a floor project coming up. How thick of aluminum sheeting did you use?
.100 48 x 96 3003 Aluminum
Does this foam squeak?
Do you do this for customers
My jon boat is a 1448 and the middle seat was removed by the previous owner, it flexes a lot, enough to crack 3 cross members, i was hoping that putting some aluminum angle perpendicular with the cross members to tie them together then puting an aluminum floor down, do you think that would stiffen it up? Have you noticed a difference in stiffness?
Yes that would definitely sure up the stiffness
What type of foam is that?
Where did you get the foam board at
Any hardware store, Lowes, Home Depot, Menards, etc
Were u get the big sheet of aluminum
Local welder was able to order it in for me
What thickness did you do for the aluminum floor?
.100 48 x 96 3003 Aluminum Sheet
May I ask why you’re putting foam in?
It's for safety flotation, basically if the boat gets swamped or capsized it aids in not having the boat sink completely. It's also legally required and helps with sound deadening
What size thickness was that aluminum sheet?
.100 48 x 96 3003 Aluminum
Where did you buy your aluminum sheets?
I bought them from a local fabrication shop, they ordered it in for me.
@@mvboutdoors Thanks man.
How much was that piece of aluminum?
It was around $300 -- .100 48 x 96 3003 Aluminum
@@mvboutdoors where did you get it? How much was shipping?
@@tpainter81 The welder I had do my pods ordered it from his supplier.
Floor looks great
The foam underneath fits like crap, why even bother?