How to do a oil change on a Seadoo Spark Trixx *Removing Top Hull* (2016-2023 Models)
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- This is how to preform an Oil change on any Seadoo Trixx, This includes taking off the top hull to give full access into the engine bay.
The oil change was preformed on a 2021 Seadoo Spark Trixx
Direct Time Stamps
00:00 Required Tools
00:07 Removing Back foot-steps
00:38 (OPTIONAL) Removing Front Bin Storage
01:06 Unscrewing the Gas Cap
01:41 Removing Side panels
02:11 Unscrewing Steering Column/Rod
03:46 Unclipping Electrical Wires
04:47 Unscrewing Top Body Hull
06:26 Separating Top Body Hull from Bottom Hull
06:59 Extracting the Oil
07:27 Removing Old Oil Filter
08:10 Replacing Oil Filter & O-ring
10:12 Adding New Oil - บันเทิง
No BS. Straight to the point. Thanks for the great video!
Glad to help!
thank you - this was very helpful
Great video, exactly what I was after, nice job.
Great video
You can actually do an entire oil change on a Trixx without removing the hull top. Oil extractor to remove oil and three bolts on oil filter cap with the oil ring. 15 minutes and you’re done.
Yup
I was going to say that………
The title should be…. How to steal a Seadoo take it apart… and sale the parts on the black market! 😅😅😅😅😅😅😅😅😅😅😅😅😅
Now do the spark plugs
But to take it off isn't that much work gives you easier access to the oil filter and while your at it give the engine a clean and protect and check over anything for wear and tear.
Thank you for actually taking the time to go step by step and not just say there 33 bolts and skip over taking the top off 😅
Thanks - good video
thanks i was really in need of how to do an oil change for my seadoo spark trixx (2016-2022 model)!
Save yourself a ton of time and buy an oil extraction pump and suck the oil out through the dipstick. Use the access panel to get to the filter. Should take no more than 15 minutes.
zoaty styll
I love reading all the kiddie commemts about how he did this wrong, just suck it out, lol. This is totally the way to do it. It gives u a chance to do it properly. You can inspect all your clamps and grease the shaft. Also find leaks and other concerns along fhe way... sure, if its just a quick mid season oil change then giver, but this folks , is the way!
thanks :)
Pro tip, hold your oil can the opposite way, hole on top, and the oil will pour smooth instead of glugging.
hi.. you looked like you just ripped your seat up.. you know it's a matter of lifting the tab at the back and slide the seat back..
plus oil change can be done without removing the top deck. Good video in general tbf
Hi, what is the size for the screws for oil filter housing, thread pitch, how long it is and size of the torx? Thank you.
We use an 8mm socket, any length should work for the screw.
It requires an E8 External Torx socket.
For some reason that guy changing that oil is so hot 🥵
Damn. Seems like a lot of work just to change the oil 😬
Because he’s doing it wrong lmao you don’t have to remove the top. You can get to the dipstick tube and the filter with the top on. I’ve done it on mine.