i guess Im asking randomly but does anybody know of a tool to log back into an instagram account? I was dumb forgot the account password. I would appreciate any help you can give me!
@Dayton Maurice i really appreciate your reply. I got to the site on google and Im in the hacking process now. Looks like it's gonna take quite some time so I will reply here later with my results.
I just pulled a motor out of a customers speed6 last night and i did what you did for the axles but i am also here to warn you its going to be a pain in the rear to put the motor back with the axles like that. what i suggest to give you more room is to disconnect the sway bar inlink and then disconnect the strut from the bottom. Also take the entire caliper off the rotor this will free up your brake line and also give you a little more room to pull the axle out of the spindle. i know that you also ready have the motor out so you could just pull it out from under the hood this was for those that wanted to do it before pulling the motor or reinstalling it after you put the motor back in. now without removing the front lower control arm the axle will not come out of the car because the control arm will not drop far enough below the strut fork to get it is out so you will have to take the lower control arm out of he frame which is a 19mm located on the inner part of the subframe then you will have all the room you will need to install or uninstall your axles. Hope this helps you and other. I know this is a very old post and you may have installed the motor back in by now so this may be a mute point for you so YOU disregard.....lol
Yea the car has long since been put back together haha. But it wasn’t that hard to get the axles back in upon install. I have worked on many speeds and my philosophy is to take apart as little as possible, because if you break/strip something, most of the time you can’t just run to the local parts store and grab a new part. Waiting days or weeks is not ok for me as someone who does their own work , and occasionally helps others with their cars
Hey bud, just to confirm, you connected the chain from the cherrry picker to the drivers side hook or whater that is. Either way the chain was connectet to that one point for the entire pulling process?
@@spillybuilt7491 I think he’s saying that the bolts are out, but there is not enough room to remove the manifold. I had to twist the engine sideways to pull the manifold off to the pull the engine out.
Between the trans and axle. It took a rather small bar to be able to pop out. I tried for like an hour with a large pry bar and got no where. Went and bought a smaller set and popped it in 5 seconds lol
Austin Berner that includes filming everything though, so who knows how much time that added. And I probably spent 2 hours between messing with the axle and the exhaust lol. I could do it wayyyy faster if I had to do it again. And help is always appreciated! We’ll see if this rona dies down before I get around to putting it in or not. Social distancing and what not lmao.
amazing, you were able to show everything decently clear within 15 minutes. that's a pretty good info:time ratio
Appreciate the support and feedback!
i guess Im asking randomly but does anybody know of a tool to log back into an instagram account?
I was dumb forgot the account password. I would appreciate any help you can give me!
@Gatlin Keaton Instablaster ;)
@Dayton Maurice i really appreciate your reply. I got to the site on google and Im in the hacking process now.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Dayton Maurice It worked and I now got access to my account again. Im so happy!
Thank you so much you saved my ass :D
I just pulled a motor out of a customers speed6 last night and i did what you did for the axles but i am also here to warn you its going to be a pain in the rear to put the motor back with the axles like that. what i suggest to give you more room is to disconnect the sway bar inlink and then disconnect the strut from the bottom. Also take the entire caliper off the rotor this will free up your brake line and also give you a little more room to pull the axle out of the spindle. i know that you also ready have the motor out so you could just pull it out from under the hood this was for those that wanted to do it before pulling the motor or reinstalling it after you put the motor back in. now without removing the front lower control arm the axle will not come out of the car because the control arm will not drop far enough below the strut fork to get it is out so you will have to take the lower control arm out of he frame which is a 19mm located on the inner part of the subframe then you will have all the room you will need to install or uninstall your axles. Hope this helps you and other. I know this is a very old post and you may have installed the motor back in by now so this may be a mute point for you so YOU disregard.....lol
Yea the car has long since been put back together haha. But it wasn’t that hard to get the axles back in upon install. I have worked on many speeds and my philosophy is to take apart as little as possible, because if you break/strip something, most of the time you can’t just run to the local parts store and grab a new part. Waiting days or weeks is not ok for me as someone who does their own work , and occasionally helps others with their cars
Good job
Hey bud, just to confirm, you connected the chain from the cherrry picker to the drivers side hook or whater that is. Either way the chain was connectet to that one point for the entire pulling process?
mikef058 yessir! The whole drivetrain is decently balanced by using just that one hook
Great video
Mazdaspeed Boys thanks man! Appreciate the support!
About to change my clutch would you says it’s easier to pull the engine?
How did you get the bracket separated from the back of the motor to the exhaust? That’s the only thing holding me back from pulling my motor
Breaker bar or impact wrench! If it’s still really stuck, you might need to heat it up
@@spillybuilt7491 I think he’s saying that the bolts are out, but there is not enough room to remove the manifold. I had to twist the engine sideways to pull the manifold off to the pull the engine out.
What did you do with the freon from the AC Unit?
He said it was empty?
where exactly did you pry the driver side axle from? it is the only thing i have left before i pull it and I cannot for the life of me get it out
Between the trans and axle. It took a rather small bar to be able to pop out. I tried for like an hour with a large pry bar and got no where. Went and bought a smaller set and popped it in 5 seconds lol
@@spillybuilt7491 through the wheel well? or from up top? thanks for getting back to me!
I popped both axles from laying underneath the car.
@@spillybuilt7491 thanks my dude! worked like a charm!
Hell yea! Those axles can be a pain
How is it running after 2yr?
It caught on fire 19 months ago 🥲
Sick video, that did not look fun lol
Austin Berner thanks man! It took me about one full day to do by myself. It’s not terrible, just takes awhile!
Spilly Built that’s really pretty solid for doing it yourself. Lmk if u need help whenever you put the other motor back in
Austin Berner that includes filming everything though, so who knows how much time that added. And I probably spent 2 hours between messing with the axle and the exhaust lol. I could do it wayyyy faster if I had to do it again. And help is always appreciated! We’ll see if this rona dies down before I get around to putting it in or not. Social distancing and what not lmao.
Just junk the over rated Mazda BS. You get to drive it 36 days when the other 330 days will give you stress from you not driving it.
I appreciate the input. I have more than 36 days on the car this year already