@BrianMann216 my 2019 jeep wrangler says no bus, continue in D, go to dealer, unable to shift. Radio doesn’t work, cluster don’t turn on, doesn’t crank. What do you think the problem can be?
If I have something questionable or for intermittent issues I will load it up for sure! If the load is not working like it should a voltage reading will show the fault if its in a circuit (not the load itself) That being said, if you load test it with a headlight it should be good! thanks for watching and commenting !
started like it was a problem whit the same wire , fixed it temporarily by giving fuse 22 power from fuse 16 and started once by then giving power to the starter solenoid from the battery, so went to the store without shutting it off, when i got home the asd relay wouldnt stop clicking till i unplugged the ecm, never started again since a month now
I have a 2007 jeep all the lights come on but won’t crank at all it’s the weirdest thing ever key turns over even got a boost off still didn’t crack is it my pcm
Keep the full diag videos coming. Great to see someone else's approach and very entertaining
Great Video Had that problem lots of times. Good to See You Mr. Mann
Nice. As soon as you said no comm and no start I knew it had to be that relay box. Ive done a few on dodge calibers. Very common 😄
I have seen a few as well! AMAZING that relay center is not weather sealed!
@BrianMann216 my 2019 jeep wrangler says no bus, continue in D, go to dealer, unable to shift. Radio doesn’t work, cluster don’t turn on, doesn’t crank. What do you think the problem can be?
Wow nice job. Great video. Best regards.
Nice job I like to load test my power and grounds with a headlight
If I have something questionable or for intermittent issues I will load it up for sure! If the load is not working like it should a voltage reading will show the fault if its in a circuit (not the load itself) That being said, if you load test it with a headlight it should be good! thanks for watching and commenting !
Good Job Mr B
Please help! Got the same issue i think my ecm is fried, pin 1, 2,3,4 are good asd relay has power.. ordered a preprogramed ecm will it work?
started like it was a problem whit the same wire , fixed it temporarily by giving fuse 22 power from fuse 16 and started once by then giving power to the starter solenoid from the battery, so went to the store without shutting it off, when i got home the asd relay wouldnt stop clicking till i unplugged the ecm, never started again since a month now
had issues whit headlights and 4 flashers ,wipers coming on randomly before the no start whit no check engine light
while a 2000$ scanner would take 30mins to connect and gave p0100 and a bunch of other codes, that was a month ago when it still started..
I have a 2007 jeep all the lights come on but won’t crank at all it’s the weirdest thing ever key turns over even got a boost off still didn’t crack is it my pcm
Mines throwing low voltage on throttle body and high voltage on pedal and low voltage on cylinder 3 I’ve replaced engine harness already
EXCELLENT
what resources are you using online
All data, identifix, tech authority online and at times other oe si
Just asking how to use a computer as a scan tool
I use Software from the oe, and a USB to dlc/ obd interface device.
👍👍
No crank, no start? Have you ever had a no crank start?😏
Haha
✌️✌️