Important/Tip: When you flash the sd card, and are trying to transfer games via wifi/eithernet you will be prompted to input username and password. When flashing you erase all existing pass or users so by default it becomes. username: *pi* password: *raspberry*
6yr old content still 100% viable. Recently dug up an old raspberry pi 3b at the house and figured itd be fun to make a "mobile" emulator console. Setup was super easy. Highly suggest this guide.
Funny, I just found my old 3b in the back of a drawer and started doing this also for a little project. Got it stuck to the back of a tv pulling power from a usb, with a wireless controller. Nice clean little system.
Finally! A clean, concise, professional, filler-free tutorial that gave me what I needed to start enjoying my new Pi instead of wanting to pull my hair out in frustration. Two minutes in and I had already subbed. Dude, thank you so much:)
I dont mean to be so off topic but does anybody know of a method to log back into an Instagram account?? I was stupid forgot the account password. I would appreciate any assistance you can give me!
@Frederick Trenton thanks so much for your reply. I got to the site on google and I'm in the hacking process atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.
Bro this is THE BEST tutorial of not only raspberry pi and retro pi but of any tutorial I've watched on youtube! Great stuff! Not including Alantutorial of course...."how to touch a wall with an apple" cannot get much simpler than that.
In the next few weeks i'll be setting up my arcade console so i'll tell you about it then. But I never set up a pi before and your video covered every question i had.
You can also install the Manager program. It lets you log in to your RetroPie using a browser, and you can check the stats, transfer rom/bios files, etc.
I'm going to have to do this tutorial again... for some reason my Pi's retropie setup quit working correctly after being stored away for a year or so. but I do remember this being the best tutorial out there... so should be a fun project today :)
this is the only video I've seen that is straight to the point, easy to understand, and exactly what I needed. Thank you and look forward to viewing the rest of your videos... :-)
I just got a kit from Amazon and Etcher kept complaining that it couldn't verify the SD card (after about a 5 minute process) - THANKFULLY, I've watched many of your videos and remembered SD Card Formatter. Once I formatted the SD Card, Etcher did its thing without complaint. You might want to put this in your show notes so it can save someone else some frustration.
If anyone else is experiencing the same issue still, I used a program called Rufus. Generally used for linux distro burning to usb, but works for RetroPie to SD card as well. Give it a go, Download Rufus usb, select the drive and your RetroPie image. Accept all the warnings (partitioning etc). Rufus will automatically repartition the SD card and burn the image. Once ready, a green bar will appear at the bottom stating "READY" and you're good to go. Hope this helps someone out.
What if the welcome sign does not come up upon initial startup? Im moding my arcade1up street fighter 2 cab and nothing but a black screen. I plugged in my raspberry pi 4 put in my sd card I got from someone that installed rom games on for me. Nothing but a black screen.
Yeah, looks like you also need an adapter to get the image on the sd card. I guess people just assume you already know you will need this before ordering stuff. I see you mention it @3:14. My fault I suppose, I ordered the pi, sd card and power supply before saying to myself "surely I wouldn't need any sort of sd adapter" then I found this video. Thanks for the info.
FYI for anyone else attempting this: Windows will automatically format any SD Card larger than 32GB to exFAT, which cannot be read by the Raspberry Pi. The Raspberry Pi requires the SD Card to be formatted to FAT32 so it can be read properly. To format an SD Card larger than 32GB (in my case I had a 128 GB micro SDXC card), use the following tool: www.ridgecrop.demon.co.uk/index.htm?guiformat.htm This information was found on the Raspberry Pi foundation page, so I'm not just spewing nonsense!: www.raspberrypi.org/documentation/installation/sdxc_formatting.md
Didn't work for me, any idea as to why please? I used it, then installed Rpie using the raspi imager - then plugged into the Pi and nothing, no green light so not booting it at all?
@@rs.zsalma i actually havent used the rpie manager before. I download the raspbian. Iso from the raspberry pi website and flash it to the sd card (after first formatting it to fat32 using the tool mentioned in my first comment) using etcher: www.balena.io/etcher/
@@kurbii5216 an sd card reader will work! You should be plugging in the micro sd card (that you want to use with your raspberry pi) into the sd card adapter. When u plug the sd card adapter into your computer, it will show up as an external storage device.
The raspberry pi is such an amazing price of tech, you can pretty much make ANYTHING tech related with one of those things after watching this vid I’m really tempted to buy one, oh and awesome video :) you got yourself a new subscriber
Subrcribed. Dont even care to much about emulators but I saw how much effort you put into your videos. Also saw your coverage of nintendo switch emulators, so intrested in that.
A lot easier than rasbian Os download, because all the videos are outdated so I could never know how to do it until a month later after I got my Retropie working, and then I figured out how and what the different types were and what they did too.
I swear having a Mac makes it impossible to follow any tutorials on software stuff. Something that is so easy on windows is ridiculously hard on Mac. I gave up and bought a preloaded SD card for $20. Not worth the hassle.
Ada.mp4 the preloaded route worked much better for me. My stuff is up and running great. I can do anything with hardware, but the software makes me wanna act out the fax machine beat down from Office Space on whatever is giving me issues. Lol
That’s why I have both, for work and school MacOS is great and has such smooth functionality between my MBP and iPad so I can pick up where I left off, but my Windows PC for everything else.
Firstly, congratulations and thank you! You're the retropie guy! It helped me a lot here, on the other side of the world. I wanted to know if you know about 2 things: It is possible to display, next to the games, information about time played (how many hours I spent playing a certain game). Also, it seems stupid, but I'm not finding where to display the clock in the main menu of retropie (v4.8) / EmulationStation vs.11.2RP. Thanks again!
ok I think I have done this wrong but when I open the game on the pi it just like kicks me off and idk what to do when it says press a button to configure I do and there are a few options so I press launch and it take me back to game select if u guys could help that would be good
@ETA just to point out that if you present a .img file already zipped to Etcher it unzips it and flashes it, there's no need to unzip it yourself. Not that you didn't know this, just informing your audience.
Does retropie support gba battery clock? Some games need it for certain things (i.e. pokemon ruby/sapphire/emerald uses it for shoal cave and a few other things).
Very good explanation. I was able to install it on raspberry pi B+ easily. And here is a idea for future video- how to transfer the appropriate files from raspberry image to run it on windows pc ?
Hey there! I follow everything to the perfect. My question is, why do 4 direction games like pac man and donkey kong get hung up with my 8 directional contoller is there a way to fix this? thank you
I tried searching for a retro pie file on my computer with the SD card in but I got no results. I did all capitals and two backslashes and got nothing.
great video just a question it iss possible to put a rasperry pie or something in a ps3 sixaxis controller so that the sixaxis is an console and connect to an hdmi dongle stick who get the power from the usb from tv ?
ETA prime. Great guide and got me up and running pretty fast. The only problem I’m having is my Bluetooth remotes don’t recognize the right trigger button in emulation station setup. Thoughts???
Where would you recommend getting ROMs from? I'm rather inexperienced and don't entirely know which sites are scams or how to do it. If anyone could comment a link or name that would be awesome :)
Great video! I'm a noob when it comes to this, and this helped a lot. One question, my N64 games are not loading in retropie. How do I fix that? Sorry if you already answered this question.
i'm sure i'll never find htis in the other videos, but how long does it take for etcher to flash my drive, seems it's beeing going for like 5 minutes, is this normal? Help
Is there a way to have retropie and something like a desktop gui installed on the same sd card? If so, what is the process I should take to install? Install OS first (like NOOBs) before retropie?
Important/Tip: When you flash the sd card, and are trying to transfer games via wifi/eithernet you will be prompted to input username and password. When flashing you erase all existing pass or users so by default it becomes.
username: *pi*
password: *raspberry*
life saver
Thanks so much man.
Thank you!!!!!!!!!!!!!
Rusbel Ayala you are just so kind...thanks much !!
Aw not working for me. wouldnt accept either and now getting prompt telling me windows cannot access \\RETROPIE
6yr old content still 100% viable. Recently dug up an old raspberry pi 3b at the house and figured itd be fun to make a "mobile" emulator console. Setup was super easy. Highly suggest this guide.
Funny, I just found my old 3b in the back of a drawer and started doing this also for a little project. Got it stuck to the back of a tv pulling power from a usb, with a wireless controller. Nice clean little system.
@@DeeDee-bm9hr Whatd you use for a wireless controller? USB dongle type deal?
@@gopatriots1991 yea cheap nes wireless with a dongle from Amazon. Came in a pack of 2. Still working on configuring a Xbox controller
Finally! A clean, concise, professional, filler-free tutorial that gave me what I needed to start enjoying my new Pi instead of wanting to pull my hair out in frustration. Two minutes in and I had already subbed. Dude, thank you so much:)
I dont mean to be so off topic but does anybody know of a method to log back into an Instagram account??
I was stupid forgot the account password. I would appreciate any assistance you can give me!
@Richard Paul instablaster :)
@Frederick Trenton thanks so much for your reply. I got to the site on google and I'm in the hacking process atm.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Frederick Trenton it worked and I finally got access to my account again. I am so happy!
Thank you so much, you saved my account !
@Richard Paul No problem =)
Thank you for not having an annoying intro.
Bro this is THE BEST tutorial of not only raspberry pi and retro pi but of any tutorial I've watched on youtube! Great stuff!
Not including Alantutorial of course...."how to touch a wall with an apple" cannot get much simpler than that.
I should be receiving my Pi tomorrow, I will definitely follow your video :)
Man I wish all tutorials were that satisfying to watch. Thanks!
GOT IT! just got my 3B+ delivered before 9am! got retroflag nes case + and other goodies. SO lit. been wanting a Pi for a couple years now! ^_^
This just might be the clearest and simplest tutorial on youtube i've ever seen. Thanks allot man!!! 👍
In the next few weeks i'll be setting up my arcade console so i'll tell you about it then. But I never set up a pi before and your video covered every question i had.
Your videos are brilliant, helped me loads on multiple systems and how to configure software. Perfectly paced and easy to follow. Good job sir :)
You can also install the Manager program. It lets you log in to your RetroPie using a browser, and you can check the stats, transfer rom/bios files, etc.
you should make a tutorial on how to play background music on retropie
I know how!
@@ede8709 how
Andrew Dann Mario Bros 2 theme?
I'm going to have to do this tutorial again... for some reason my Pi's retropie setup quit working correctly after being stored away for a year or so. but I do remember this being the best tutorial out there... so should be a fun project today :)
Fancy seeing you here. I have the same exact issue. Think my sd card died.
@@chadnuts I'm back at it again a year later lol
Straight to the point, lots of info and no fluff. I like that. Thank you.
Great video, I’m building an arcade and this is very helpful
mantapppp....udah ngikutun dari blemer sampe mame...bikin emu nya konek ke engine...ternyata ini yg dicari...siapp...
1:42 Link isn't in the description as stated, but it's clearly visible in the address bar on the vid.
this is the only video I've seen that is straight to the point, easy to understand, and exactly what I needed. Thank you and look forward to viewing the rest of your videos... :-)
I just got a kit from Amazon and Etcher kept complaining that it couldn't verify the SD card (after about a 5 minute process) - THANKFULLY, I've watched many of your videos and remembered SD Card Formatter. Once I formatted the SD Card, Etcher did its thing without complaint. You might want to put this in your show notes so it can save someone else some frustration.
I've been trying to do this for an hour (its freaking 2 A.M. right now) and now i feel stupid. Thank you so much for posting this comment.
God... I spent 3 hours yesterday and corrupted 2 sd cards and a usb drive! Got those fixed but now I feel like a HUGE idiot
I did the same and messed up my PC some how. I reinstalled windows and about to do the process over hope all goes good.
@brian dormer @eta prime Do i need to format the sd card after i used etcher ?
If anyone else is experiencing the same issue still, I used a program called Rufus.
Generally used for linux distro burning to usb, but works for RetroPie to SD card as well. Give it a go,
Download Rufus usb, select the drive and your RetroPie image. Accept all the warnings (partitioning etc).
Rufus will automatically repartition the SD card and burn the image. Once ready, a green bar will appear at the bottom stating "READY" and you're good to go.
Hope this helps someone out.
What if the welcome sign does not come up upon initial startup? Im moding my arcade1up street fighter 2 cab and nothing but a black screen. I plugged in my raspberry pi 4 put in my sd card I got from someone that installed rom games on for me. Nothing but a black screen.
And you will need at least SD card class 10 for good performance :D just a friendly reminder
Can you help me
Yeah, looks like you also need an adapter to get the image on the sd card. I guess people just assume you already know you will need this before ordering stuff. I see you mention it @3:14. My fault I suppose, I ordered the pi, sd card and power supply before saying to myself "surely I wouldn't need any sort of sd adapter" then I found this video. Thanks for the info.
FYI for anyone else attempting this: Windows will automatically format any SD Card larger than 32GB to exFAT, which cannot be read by the Raspberry Pi.
The Raspberry Pi requires the SD Card to be formatted to FAT32 so it can be read properly.
To format an SD Card larger than 32GB (in my case I had a 128 GB micro SDXC card), use the following tool: www.ridgecrop.demon.co.uk/index.htm?guiformat.htm
This information was found on the Raspberry Pi foundation page, so I'm not just spewing nonsense!: www.raspberrypi.org/documentation/installation/sdxc_formatting.md
Didn't work for me, any idea as to why please? I used it, then installed Rpie using the raspi imager - then plugged into the Pi and nothing, no green light so not booting it at all?
@@rs.zsalma check the power supply, that can be a common issue.
@@rs.zsalma i actually havent used the rpie manager before. I download the raspbian. Iso from the raspberry pi website and flash it to the sd card (after first formatting it to fat32 using the tool mentioned in my first comment) using etcher: www.balena.io/etcher/
Does this work with an SD card reader or will it read as a flashdrive? Would a flashdrive need this method?
@@kurbii5216 an sd card reader will work! You should be plugging in the micro sd card (that you want to use with your raspberry pi) into the sd card adapter. When u plug the sd card adapter into your computer, it will show up as an external storage device.
really good, very underrated TH-camr, only because of you i'll get me rasperry pi.
@07:52 , if you are unable to connect to the PI from your machine, check if the SSH is enabled in your PI.
The raspberry pi is such an amazing price of tech, you can pretty much make ANYTHING tech related with one of those things after watching this vid I’m really tempted to buy one, oh and awesome video :) you got yourself a new subscriber
wow this is a lot easier than I thought it would be.
Subrcribed. Dont even care to much about emulators but I saw how much effort you put into your videos. Also saw your coverage of nintendo switch emulators, so intrested in that.
A lot easier than rasbian Os download, because all the videos are outdated so I could never know how to do it until a month later after I got my Retropie working, and then I figured out how and what the different types were and what they did too.
The best tutorial I have watched, thank you
a very good tutorial will be recommending this to friends
I swear having a Mac makes it impossible to follow any tutorials on software stuff. Something that is so easy on windows is ridiculously hard on Mac. I gave up and bought a preloaded SD card for $20. Not worth the hassle.
Windows is free on Mac
Ada.mp4 the preloaded route worked much better for me. My stuff is up and running great. I can do anything with hardware, but the software makes me wanna act out the fax machine beat down from Office Space on whatever is giving me issues. Lol
That’s why I have both, for work and school MacOS is great and has such smooth functionality between my MBP and iPad so I can pick up where I left off, but my Windows PC for everything else.
Firstly, congratulations and thank you! You're the retropie guy! It helped me a lot here, on the other side of the world.
I wanted to know if you know about 2 things:
It is possible to display, next to the games, information about time played (how many hours I spent playing a certain game).
Also, it seems stupid, but I'm not finding where to display the clock in the main menu of retropie (v4.8) / EmulationStation vs.11.2RP.
Thanks again!
I bought that Cana kit in the video.....trying to figure out if I need to reformat the SD card it came with
Thanks so much for this. Just ordered my kit today on amazon and will be building this happily tomorrow!
Don't hit yourself but the pi4 just got released.
There's a reason why this is half a million views.. Thanks for the tips, difficult to find other places.
The best videos!!!! Love your turtorials my bro, the BEST !!!!!
This is the best guide I was able to find regarding this. Amazing guide
I needed this I had no clue what I was doing and was trying to load up noobs so I can install retropi
awesome video can't wait to do one myself now
Can retropie be ran on a pc ?
Where do I download the games to add to my roms
4:25 FYI if your on a mac you can copy directly to sd card.
I have a Raspberry Pi 2 model B, do i have to use a power supply with 2.5 Amp like the one you linked to? Or can i use a 1.8 Amp power supply instead?
Hello, at 7:23 in the video, how and where did you get the roms loaded onto your computer? Thank you!
Where has this been all my life.
how to upload zip games that you transfer on the rom?
Great video! Keep the good work... it is hard to find so good and detailed videos! Top...
ok I think I have done this wrong but when I open the game on the pi it just like kicks me off and idk what to do when it says press a button to configure I do and there are a few options so I press launch and it take me back to game select if u guys could help that would be good
Very nice video help me out a lot
VERY, VERY well explained!
What do you do about the formatting the disc message pop up on 4:24?
Augustine Vu close the window
close, don't format
Thanks for the vid. I’m just learning about the Raspberry Pi and RetroPie. You earned a new subscriber with this vid.
@ETA just to point out that if you present a .img file already zipped to Etcher it unzips it and flashes it, there's no need to unzip it yourself. Not that you didn't know this, just informing your audience.
Megadrive "is" Genesis? You mean I could have had a V8? Thank you... I didn't realize. This was worth the price of admission right there
Thank you I have been looking for a video like this
Does retropie support gba battery clock? Some games need it for certain things (i.e. pokemon ruby/sapphire/emerald uses it for shoal cave and a few other things).
Very nice video bro. Only thing I’m stuck at is where did you download the ROMs from?
Dude, I dont know how I came across your channel but its freaking awesome. It's very informative and easy to follow. You earned a sub. Keep it up.
can i reconfigure the buttons after i’ve configured with a controller? like if i wanted to change to a different one?
None of the roms were scraped when I ran it. Do you have a more in-depth video on how to do this or even add a small movie clip of the game? Thanks!!
Does it work with raspberry pi4?
Brilliant video! Clearly explained, many thanks for your time, appreciated.
Very good explanation. I was able to install it on raspberry pi B+ easily.
And here is a idea for future video- how to transfer the appropriate files from raspberry image to run it on windows pc ?
the best tutorial simple and clear great work man :)
Man this is a great video you covered everything
My recommended USB gamepads for RetroPie are the Pokken pro pad and / or a hacked PSP with FuSa gamepad
Hey there! I follow everything to the perfect. My question is, why do 4 direction games like pac man and donkey kong get hung up with my 8 directional contoller is there a way to fix this?
thank you
Donkey Kong is only a two-direction game, for one thing. Double check your inputs in the RetroArch settings.
I see.
@@SmaMan no, donkey Kong is 4. Climbing up ladders and walking
My Christmas gift
Do you have a video that shows how to add daphne?
Just got my complete kit. THIS IS AN AMAZING PC... Everything I need plus more. It's faster than you would think; using WiFi. 2818 Version...
I tried searching for a retro pie file on my computer with the SD card in but I got no results. I did all capitals and two backslashes and got nothing.
try using the ip address instead
So when I go to file explorer just like you said at 7:31 and enter \\RETROPIE I get an network error message saying windows cannot access \\RETROPIE
Those games that were already on your PC how did you get those there and where did you get them from so you could transfer them over?
do you format the disk or no?
Great video tutorial 👍🏼. Thanks for sharing
grate vid just remember to link every thing in the description (had a hard time) keep up the good work
Your video is amazing! Thank you!
Awsome Video thanks ETA!
great video just a question it iss possible to put a rasperry pie or something in a ps3 sixaxis controller so that the sixaxis is an console and connect to an hdmi dongle stick who get the power from the usb from tv ?
Thank you so much easy to follow step by step. You're awesome man!
ETA prime. Great guide and got me up and running pretty fast. The only problem I’m having is my Bluetooth remotes don’t recognize the right trigger button in emulation station setup. Thoughts???
Very well explained tutorial. Thanks
Is this something you have to run on a computer or do you just hook it up to your tv like the old systems?
Can you flash a flash drive with the image for the same results?
Nice video man!
Excellent video. Thank you.
quick question, im using a classic snes controller, it doesnt have all the buttons listed, what do i do?
Where would you recommend getting ROMs from? I'm rather inexperienced and don't entirely know which sites are scams or how to do it. If anyone could comment a link or name that would be awesome :)
Did you find out where to get some games? Im in the same situation and have no idea where is a safe place to get them
Can retropi work witha a crowpi? I need a tutorial
i lost the setting where I can config my inputs on the controller, how do I get that back?
Reinstall retropie
So download etcher and retropie and then run etcher and select the retropie image. Thanks!
Hey, i've just bought everything to convert my son's arcade machine although i'm concerned about powering off the device. What are your thoughts?
Thanks for your video, but where did you get all your video games that you have on your pc?
Great video! I'm a noob when it comes to this, and this helped a lot. One question, my N64 games are not loading in retropie. How do I fix that? Sorry if you already answered this question.
i'm sure i'll never find htis in the other videos, but how long does it take for etcher to flash my drive, seems it's beeing going for like 5 minutes, is this normal? Help
Great video, thanks. Scraping isn't finding any images at all. Can anyone help with this?
If I get 5 different controllers do you have to set each one up?
Is there a way to have retropie and something like a desktop gui installed on the same sd card? If so, what is the process I should take to install? Install OS first (like NOOBs) before retropie?
How well will this work using a CRT TV via the composite video connection? I’m trying to make a small arcade using a 9” color CRT.